System One range

System One Truck Racks, From Contractor and Utility Rigs to Pick-up Traks, Tool Box Hangers, Work Winches and More

Heavy I.T.S. and Standard series pickup rigs, 600 to 1,250 lb ratings, bed rail mounting, crossover and side box spacing, trade accessories and Work Winch conversions.

System One truck racks answer a common pickup problem, which is carrying ladders and long stock overhead while keeping the bed open for tools, materials and truck boxes. The range runs from the Heavy I.T.S. Contractor Rig and the Utility Rig to Pick-up Trak mounting, top-side, low-side and crossover tool box fitting, Work Winches and trade accessories. Nation Wide Ladder helps you choose, quote and install the right System One rig for your truck, with custom powder coating available on new System One truck rack purchases.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where System One Truck Racks Earn Their Keep on a Working Pickup

System One designs heavy aluminum racks for contractors and utility work, and the pickup range reflects that. Roofers, electricians, plumbers, HVAC installers and carpenters carry ladders and long stock overhead while keeping the bed free for tools and materials, and a System One rack that also anchors truck boxes and tie-downs means fewer separate parts bolted to the truck. A lighter Utility Rig serves a homeowner too, carrying extension ladders, kayaks or a canoe without the full contractor build.

Several System One parts are aimed at particular trades. Extension Beams on the Contractor Rig carry the front crossmember forward over the cab, making room for flexible stock like thin-wall tubing, trim molding and siding. The A114 Crossmember J Hook holds big coils of extension cord, welding cable or high pressure hose that will not wind tightly. Quick Hooks clip into the Pick-up Trak to keep 5 gallon buckets of spackle or roof coating from sliding, and sliding cargo anchors in the same Trak stop pipe and fittings from rolling around. System One’s own list of users names contractors, utility companies, the military and government agencies.

Tell our team what your crew hauls in a typical week, and we will point you to the System One rig and trade accessories that suit that load on your truck.

System One A114 – Crossmember J Hook

System One Contractor and Utility Rigs, Plus Accessories That Bolt On

The System One Heavy Duty Contractor Rack is the Heavy I.T.S. version of the Contractor Rig, rated by System One at 1,250 lb. Its rear crossmember lifts out using adjustable handles, and its mid crossmember slides fore and aft along the extension beams to carry step ladders and shorter or flexible material. Removing the whole rack takes roughly three to five minutes, and the Pick-up Traks stay on the bed rails to restrain cargo and guard the rails.

The System One Heavy Duty Utility Rack uses free-standing trusses with a 600 lb working load rating. Its rear truss removes in seconds for full access to the bed, and it has side stops on all four upper corners. In Heavy I.T.S. form it accepts tool box hangers and Work Winches, while the Standard series takes ratchet tie-downs and breaks down small enough to hang on a garage wall.

Accessories we list for these racks include the A109 Tall Side Stops, A114 Crossmember J Hook, A123 Tool Box Lift Kit, A306 Conduit Carrier End Cap Kit, A321 Strobe/Antenna Light Mount, AWG Window Guard and AWW Work Winches.

When the rig has to match a company fleet, we offer custom powder coating on new System One truck rack purchases, so the color is settled before the rack goes on the truck.

System One A109 – Tall Side Stops

System One Pickup Rack Construction, Trak Mounting and Published Load Ratings

Everything starts with the Pick-up Trak, an aluminum base that attaches to the inside lip of the bed rail and spreads the weight of rack and cargo along it. Once the Traks are in place, System One says no further holes need to go into the truck, because the trusses and accessories all mount to the Traks. Legs and crossmembers share a 4-1/2 inch by 2-1/2 inch truss profile, with the legs angled inward at 17.5 degrees to follow the cab.

Fasteners are 18-8 stainless steel, and side stops are cast aluminum. A standard Contractor Rig is rated at 1,000 lb, and I.T.S. gussets raise it to 1,250 lb. System One’s documentation points out that rack ratings have no common industry standard and that real capacity also depends on driving, road conditions and suspension, so treat any rating as a ceiling rather than a target.

Only the corner gussets separate the Standard series from the Heavy I.T.S., or Integrated Tie-Down System, series. The standard gusset hides inside the corner, while the heavy version has thicker walls, the bores that carry a Work Winch and a T-slot underneath for tool box hangers. Each leg sits on a truss mount with an oblong hole, so it can shift about half an inch in or out during fitting, and accessory knobs use brass threaded inserts with an O-ring that resists rattling loose.

If you want to see how a Trak, gusset and truss fit together before committing, book a free in-person consultation at our Windham, NH or Worcester, MA showroom.

System One – Heavy Duty Contractor Rack

Sizing System One Truck Racks Around Your Tool Boxes

Tool box plans should be settled before ordering. Top-side and low-side boxes hang from tool box hangers at the rear and bolt at the front, so they need no legs on the bed floor, but they do require Heavy I.T.S. gussets. Crossover boxes bolt into the T-slots, and a lift kit is offered to raise them.

On an 8 foot bed the space between trusses measures 88 3/8 inches, so an 87 inch box fits, while a 90 inch box calls for extra-length Traks that open the gap to 90 3/8 inches by adding an inch at each end and still keep the rack inside the bed, clear of the tailgate. Trucks with tapered bodies limit how far the mid crossmember can travel, which matters if you carry short ladders.

A crossover box sits on two 5/16 inch carriage bolts slid into the top slot of each Trak, so the only drilling is through the box itself. Keeping legs off the bed floor also lets drywall and other sheet goods slide in without catching, and it avoids puncturing a bed liner. A low-side box can pair with a crossover box, with its front bolted to the crossover’s rear panel through a spacer.

We install truck boxes as well as racks, so the underside, high side, low side or saddle box and the System One rig above it can go on your truck in a single visit.

System One – Heavy Duty Utility Rack

How System One Truck Racks Share the Pickup With Ladders, Boxes and Tanks

A rack decides what rides above the bed, but the same truck also has to carry the ladders themselves, the truck boxes hung from the frame and often a transfer tank or other equipment. Planning those pieces together avoids a box that blocks a truss or a ladder that overhangs the cab further than the rack can support. Many contractors compare racks and boxes from a few makers before settling on a single layout for their fleet.

To see how System One lines up against the other makers we carry, open our ladder and truck equipment brands hub and compare them side by side.

System One AWW – Work Winches

Care and Work Winch Upgrades for System One Truck Racks

Aluminum and stainless hardware remove the repainting that steel racks need, which is a large part of why System One left steel behind, but a periodic check of bolts, knobs and inserts keeps the rack quiet and tight. Replace worn Ladder Life or Ladder Glide inserts so ladders keep riding on rubber and plastic rather than metal, and look over the Traks wherever cargo rubs against the bed rail. System One racks that come off for the winter store more easily when the knobs and inserts go into a labeled bin, so the next fitting goes back together without hunting for parts.

Standard series racks bought after April 1, 2000 can be converted to take Work Winches by replacing four gussets and four braces, since the mounting holes already line up. Older System One racks can be converted too, though the maker describes that job as difficult, so it pays to check the purchase date before planning the upgrade.

Send us a list of the gussets, braces, inserts or winches your System One rig needs, and we will come back with a quote, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.

System One Full Access Series

Spec Your Pickup With System One Truck Racks

From the first fitment check to powder coating and installation, Nation Wide Ladder brings the whole job to System One truck racks, so the rig, its truck boxes and its winches leave our bay as a single working setup. Compare options in our truck racks store category, read the wider System One brand overview, or send your truck details through Request a Quote.

System One Truck Racks FAQs

Do System One truck racks require drilling?

The Pick-up Traks attach to the inside lip of the bed rail. System One says that once the Traks are mounted, no further holes are needed in the truck for the rack or accessories.

What is the difference between the System One Contractor Rig and the Utility Rig?

The Contractor Rig is the full working rack, rated up to 1,250 lb in Heavy I.T.S. form, with an adjustable mid crossmember. The Utility Rig uses free-standing trusses, is rated at 600 lb and suits ladders and rigid loads.

Can I mount a tool box on a System One truck rack?

Yes. Top-side and low-side boxes hang from tool box hangers on Heavy I.T.S. gussets with no floor legs, and crossover boxes bolt into the T-slots.

Will an 87 inch tool box fit with a System One rack on an 8 foot bed?

System One says an 87 inch box fits between the trusses on an 8 foot bed, while a 90 inch box needs extra-length Traks.

How fast do System One truck racks come off?

System One states the Contractor Rig removes in about three to five minutes, leaving the Traks on the bed rails.

Can System One truck racks be powder coated?

Yes. We offer custom powder coating on new System One truck rack purchases, so the color can be chosen when you order.

Need help choosing the right System One equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder