Holman Truck Racks & Equipment

Holman Pro II Racks for Full-Size Pickups, Standard and Crew Cab Racks, Cap Racks, Legs and Bars, Taller Legs and More

Heavy-duty ladder and material racks for GM, Ram, Toyota Tundra, Ford F-150 and Nissan pickups, in standard and crew cab sizes for 78 and 96 inch beds, with or without a cap.

Full-size pickups such as the F-150 and Ram 1500 haul ladders, pipe and lumber every day, so we fit Holman Pro II racks for full-size pickups built from 2 inch high-tensile mechanical tubing. At Nation Wide Ladder we list complete Holman truck racks for standard cab and extended or crew cab trucks, cap versions for pickups with a cap, and separate Holman legs and bars sets with 6 inch taller legs, then install them.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Holman Pro II Racks for the Everyday Full-Size Work Truck

A full-size pickup is the workhorse for many contractors, and the bed fills up fast with tools, boxes and materials. A Holman rack moves long items overhead, freeing the bed for everything else and keeping ladders and pipe off the tailgate. On a truck that loads every morning, that overhead space often decides how much work fits in a day.

Holman builds the Pro II from 2 inch diameter high-tensile mechanical tubing with a .083 inch wall, and designs it to carry heavy materials and cargo. Holman describes its truck racks in general as using bigger, thicker round tubes with extensive gusseting at the legs and crossbars, which gives a loaded Holman frame the stiffness it needs on rough roads.

That build suits roofers, framers, plumbers, electricians and landscapers who load daily, and it suits fleets that want one Pro II design across GM, Ram, Toyota Tundra and Ford F-150 trucks. Nissan pickups appear in the cap listings too. Contractors who run a cap in winter and an open bed in summer also benefit, because the Pro II comes in versions for both.

Our team checks your cab style, bed length and cap plans, so the Holman rack you order is the version built for your full-size pickup.

Holman PRO II TRUCK CAP RACK – EXTENDED CAB/CREW CAB – LONG BED 96″ (F-150, GM, RAM, TUNDRA, NISSAN)

Complete Holman Pro II Truck and Cap Models by Cab and Bed

For pickups without a cap, we list three complete Holman truck racks. The standard cab long bed version (04001) fits 96 inch beds on GM, Ram, Tundra and F-150 trucks. Extended and crew cab trucks have two choices, the long bed version for 96 inch beds (06001) and the short bed version for 78 inch beds (06101). Bed length is the number that matters most here, so check it against the truck’s paperwork.

For pickups with a cap, the Holman cap versions follow the same pattern and are built to ride over the cap. They come in standard cab long bed (04011), extended or crew cab long bed (06011) and extended or crew cab short bed (06111) form, such as the Holman Pro II cap rack for 78 inch crew cab beds, and their listings add Nissan to the GM, Ram, Tundra and Ford trucks named.

Pick the cab and bed first, then decide on the cap. A crew cab with a 78 inch bed and a cap takes a different Holman frame from the same truck without one, and the legs differ even when the crossbars look alike. Heavier trucks have their own versions within our wider range of Holman truck racks.

Send us your truck’s year, cab, bed length and cap details and we will quote the matching Pro II, at 603-434-6911 in NH or 508-754-3030 in MA.

Holman PRO II TRUCK CAP RACK – EXTENDED CAB/CREW CAB – SHORT BED 78″ (F-150, GM, RAM, TUNDRA, NISSAN)

Holman Pro II Racks Beside the Wider Truck Lineup

The Pro II sits alongside the newer 1200 Series Pro Rack and the medium-duty Pro III. Crews with lighter loads, or those who want the swing-out rear crossbar of the Pro Rack, may land on one of those instead.

You can also compare manufacturers side by side in our ladder and truck equipment brands hub.

Holman PRO II TRUCK RACK – EXTENDED CAB/CREW CAB – LONG BED 96″ (GM, RAM, TUNDRA, F-150)

Holman Pro II Leg and Bar Sets Plus 6 Inch Height Kits

Pro II legs and bars are listed separately for full-size pickups, which helps when you are replacing parts or changing how the truck is set up. The 01000 set is listed for GM, Ram 1500, Tundra and F-150 trucks without a cap, and the 01110 set for the same trucks with a cap. We confirm which Holman set your truck needs before ordering, and whether your existing parts can stay when the setup changes.

When a cap is taller than the standard legs allow for, Holman offers 6 inch taller legs (31530) for the 01110 set, which raise the whole Holman frame by 6 inches. Measure from the bed rail to the highest point of the cap, including lights or vents, before you choose.

Once installed, check leg and crossbar fasteners after the first few loads and every few months after that, and rinse road salt off the frame in winter so it does not collect around joints. If a crossbar starts to flex or a leg shows cracks near a weld, stop loading and have it inspected. Check that crossbar clamps are tight before each long drive.

We install the legs, bars and any taller leg kit on your truck, so the Pro II sits level over the bed or the cap.

Holman PRO II LEGS & BARS – GM, RAM 1500, TUNDRA, F-150 WITHOUT CAP

Order Holman Pro II Racks for Full-Size Pickups

Holman Pro II racks for full-size pickups give a working truck a stiff, heavy-duty frame overhead, and our Saturday morning hours at both showrooms make it easier to plan one without losing a workday. Tell us the truck and what you haul, and we will price the matching rack. Browse Holman products in our store or read our Holman overview before you ask for a quote.

Holman Pro II Racks for Full-size Pickups FAQs

Which trucks fit Holman Pro II racks for full-size pickups?

The listings name GM, Ram, Toyota Tundra and Ford F-150 pickups, and the Holman cap versions add Nissan.

What tubing does the Holman Pro II use?

Holman builds it from 2 inch diameter high-tensile mechanical tubing with a .083 inch wall.

Is there a Holman rack for a full-size pickup with a cap?

Yes. The Pro II cap versions come in standard cab long bed (04011), extended or crew cab long bed (06011) and extended or crew cab short bed (06111) form.

Can I raise a Holman Pro II?

Yes. The 31530 taller legs raise the frame on the 01110 legs and bars set by 6 inches.

Do you install Holman Pro II racks?

Yes. We provide installation for Holman products, including complete racks, cap versions and leg kits.

Need help choosing the right Holman equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder