Holman range

Holman Truck Racks for Pickups, Caps and Work Bodies, From Pro II and Pro Rack to Pro III, Econo Hoops and More

Heavy-duty and medium-duty steel racks, HD aluminum and budget options, cap and service body ladder racks, plus the legs, bed rails, window guards and crossbars that complete a setup.

When you shop for Holman truck racks, the challenge is carrying ladders, pipe and lumber overhead while keeping the bed free for tool boxes and material. Nation Wide Ladder carries and installs the Holman range, from the heavy-duty Pro II and the 1200 Series Pro Rack to the medium-duty Pro III, the HD aluminum Pro IV, Econo hoops and the Quick Pack. We also carry Holman ladder racks for truck caps and service bodies, with bed rails, window guards and the other accessories that finish the job, and our team checks each part against your cab, bed and body.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Who Relies on Holman Truck Racks Every Working Day

Contractors, utility crews and fleets that carry long or heavy loads above the bed are the buyers we most often fit with Holman truck racks. Holman describes its truck racks as built from large, thick-walled round tube with extensive gusseting at the legs and crossbars, a design aimed at a work truck that loads hard every day. Carrying ladders and long material overhead also leaves the bed free for tool boxes, fittings and bulk material.

The range covers more body styles than many buyers expect. There are Pro II racks for full-size pickups from GM, Ram, Toyota, Ford and Nissan, Pro III versions for mid-size pickups with and without a cap, and Pro II body racks built for service bodies and platform bodies. A pickup running a commercial cap gets its own ladder racks and mount kits, including slider plates designed for ARE fiberglass cap mounting rails.

What you haul shapes the choice. Crews moving extension ladders, pipe or conduit every day lean on a heavy Holman rack, and Holman sells extra crossbars you can position wherever shorter, heavier loads need support. A service fleet already running a utility body can fit a Pro II body rack over it rather than changing vehicles, while a contractor who only needs a ladder aboard now and then can look at the lighter Holman Econo hoop or the removable Quick Pack.

A free consultation at our Windham, NH or Worcester, MA showroom lets us see how you load before recommending Holman truck racks for your fleet.

Holman MOUNT KIT – GLASS CAP RAIL MOUNT PLATES (PACK OF 8)

Holman Truck Rack Series, From Pro II Heavy Duty to Econo Hoops

Pro II heavy duty

The Holman Pro II heavy-duty truck rack is the line built for the hardest daily loading. Our listings give its tubing as 2 inch diameter high-tensile mechanical tube with a 0.083 inch wall. Versions include the Holman Pro II truck rack for 96 inch long beds on F-250, F-350 and Ram Mega Cab pickups, with side channels, legs and bars sold separately.

1200 Series Pro Rack

The Holman 1200 Series Pro Rack builds on the Pro II for full-size pickups and for pickups fitted with a service or platform body. Its rear crossbar swings out and locks open for loading, the front leg mount adjusts to fit more vehicles, a reworked foot mount reduces side-to-side deflection, and the Pro Wing wind deflector comes standard.

Pro III, Pro IV and Econo

The Holman Pro III medium-duty truck rack covers lighter work, with the 80000 model sized for a full-size pickup without a cap. The Holman Pro IV is an HD aluminum truck rack. On a tighter budget, one Holman Econo hoop works as a headache rack to protect the cab, while two make a full ladder and cargo rack, and the Holman Quick Pack ladder truck rack carries up to 250 lbs and lifts out when you do not need it.

We handle installation too, bolting the series you choose to your pickup with its legs, channels and crossbars set up for the way you load.

Holman DROP DOWN LADDER RACK – SINGLE – HIGH ROOF COVERED SERVICE BODY

Where Holman Truck Racks Fit Among Bed Rails and Tool Boxes

Overhead racks are one layer of a working setup. The bed underneath still has to hold tool boxes and stock, and Holman full-length bed rails give those boxes a mounting point while they spread the rack load and protect the bed sides. Planning the rack, the rails and the boxes together keeps ladders up top, small parts locked away and the floor of the bed open for material.

When you want to set Holman beside the other rack and truck box makers we stock, our truck equipment and ladder brands hub lays out each one.

Holman MOUNT KIT – TRUCK CAP CLAMP & LOCK AND DROP DOWN LADDER RACKS

Holman Truck Rack Specs, Tubing and Construction

Beyond the Pro II tubing figures, Holman states that its ladder racks follow SAE and ASTM manufacturing processes. Load ratings for Holman racks vary by series, length and mounting, so ask us to confirm the figure for your exact rack and truck before you order.

Material is the first spec to weigh. The Pro II line uses high-tensile mechanical tube, while the Pro IV is built from HD aluminum, which Holman presents as strong, light and fully rust proof. On a pickup that sees salted roads every winter, that resistance to rust is worth weighing against the extra strength of the heavier tube.

Height comes next. Holman Pro II legs can be raised by 6 inches with taller legs made for capped GM, Ram, Tundra and F-150 pickups and for capped F-250 and F-350 pickups, and a Holman Pro III taller-leg kit does the same for a mid-size pickup with a cap. On service bodies, Holman heavy-duty leg extensions add 9 inches and replace the 3 inch extensions supplied with the kit, and Pro II service body legs and bars include a bulkhead support and an improved rear mount, in black or white to match the body.

Send us the series, length and truck you have in mind and we will quote it, or call 603-434-6911 in NH or 508-754-3030 in MA.

Holman PRO II HEAVY DUTY LEGS & BARS – SERVICE BODIES – BLACK

Sizing a Holman Truck Rack to Your Cab Style, Bed Length, Cap or Service Body

Fit depends on the cab style, the bed length and what sits on the bed. A Pro II cap rack for an extended or crew cab with a 96 inch bed is a different part from the open-bed version, so decide between a cap, a tonneau or an open bed before ordering. Choose the series by duty, with the Holman Pro II or Pro Rack for the heaviest daily loads and the Pro III or Econo where the work is lighter.

Measure the bed rather than relying on the trim name. Holman sizes Pro II side channels and cap racks for 78 inch short beds and 96 inch long beds, and full-length bed rails come in 72, 78 and 96 inch versions. Holman also splits its Pro II legs and bars into a GM, Ram 1500, Tundra and F-150 kit and a heavier F-250 and F-350 kit, each offered with-cap and without-cap.

Caps and bodies have their own options. Holman truck cap ladder racks come in Clamp & Lock, drop down and combo HD aluminum versions in 6.5 and 8 foot sizes, and generally call for a separate mount kit. Holman service body ladder racks use heavy-duty side channels matched to standard or extended cabs and to 8, 9 or 11 foot bodies.

Before your order goes in, our team compares the series, cab, bed length and any cap or body with the Holman part numbers.

Holman COMBO HD ALUMINUM LADDER RACK KIT – DROP DOWN / CLAMP & LOCK – 6.5′ MOST COMMERCIAL CAPS

Bed Rails, Window Guards and Other Holman Truck Accessories

Holman full-length bed rails for the Pro II and Pro III spread the rack load, protect the bed sides and give you a mounting point for tool boxes, though they are not offered for a pickup with a camper shell. Holman window guards protect the rear glass, extra crossbars add support wherever shorter loads sit, and utility hooks, light mount brackets and LED beacon lights round out the system.

Accessories are easiest to plan alongside the racks themselves. Adding bed rails, a window guard or an extra crossbar on the first order means the mounting points are planned once, and it saves a second visit later. Check rack bolts, clamps and straps regularly, since vibration loosens hardware over time, and keep each load within the confirmed rating for your rack and mounting. Tie long items down at more than one crossbar so nothing shifts under braking, and keep heavy items centered across the crossbars of your Holman racks.

Our own trucks deliver door to door across New England, so bed rails, guards and extra crossbars can arrive with the rack itself.

Holman FULL LENGTH BED RAILS – 72″

Ordering a Holman Rack for Your Truck With Installation

Browse our Holman truck racks and equipment, see the full Holman truck and van equipment range, or request a quote with your truck details.

Nation Wide Ladder pairs fitment checks with installation, so the Holman truck racks you choose match your cab, bed and body and go on ready for the loads your crew carries.

Holman Truck Racks FAQs

What is the difference between the Holman Pro II and Pro III truck rack?

The Holman Pro II is the heavy-duty truck rack, built from 2 inch high-tensile tubing, while the Pro III is the medium-duty line for lighter loads. Both have their own legs, crossbars and accessories.

How is the Holman 1200 Series Pro Rack different from the Pro II?

It builds on the Pro II with a swing-out rear crossbar that locks open, an adjustable front leg mount, a redesigned foot mount and low rear grab handles. A Pro Wing wind deflector comes standard.

Can I put a Holman rack on a truck with a cap?

Yes. Holman offers Pro II truck cap racks plus Clamp & Lock, drop down and combo ladder racks sized for most commercial caps.

Do Holman truck racks fit service bodies?

Yes. Holman service body ladder racks use heavy-duty side channels matched to standard or extended cabs and to 8, 9 or 11 foot bodies, and the 1200 Series Pro Rack also suits service and platform bodies.

What do Holman full-length bed rails do?

They spread the rack load, protect the bed sides and provide a place to mount tool boxes. They are not available for a truck with a camper shell.

Can you install Holman truck racks?

Yes. We install truck racks, truck boxes and other truck equipment, and you can visit our Windham, NH or Worcester, MA showroom for a free consultation or estimate.

Need help choosing the right Holman equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder