Resources

TracRac or System One Racks for Pickups, Fixed and Sliding Models, Contractor and Utility Rigs, Mounting and More

How Thule's fixed and sliding overhead racks and the modular aluminum System One rigs differ in ratings, mounting, bed access, tool boxes, tie-downs and over-cab carrying.

Weighing a TracRac or System One rack for your pickup means comparing two aluminum designs that both carry ladders, pipe and lumber overhead, but approach mounting, bed access and tie-downs differently. Nation Wide Ladder supplies and installs both, and we set the fixed TracOne and Pro 2 and the sliding SR and Utility Rack beside System One Contractor and Utility Rigs, Pick-up Traks, Work Winches and tool box hangers.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where TracRac and System One Racks Come From

TracRac began in Fall River, Massachusetts, building truck racks for professional users from 1995, and Thule Group bought the business in 2010. The racks now sell as Thule TracRac, and Thule lists the United States as the country of origin for the TracOne, Pro 2, SR and Utility Rack. Thule builds the Pro 2, SR and Utility Rack in corrosion-resistant aluminum, and all four carry T-track for accessories, aluminum load stops that adjust across the full width of the truck and integrated wind deflectors.

System One is the rack brand of Christensen Mfg. Corp. of New Jersey, started by roofing and sheet metal contractors who built their own rack when nothing on the market satisfied them. Its rigs use extruded aluminum with stainless fasteners, and the company moved away from steel to end the painting and rust that came with it.

So both lean on aluminum, both are American, and both come from contractor roots. The real differences sit in how each rack mounts, how it gives back the bed and how loads are tied down.

Having served contractors for over 50 years, we can talk you through both makers with your own truck in mind.

TracRac Fixed and Sliding Racks Against System One Rigs

TracRac truck racks split into fixed and sliding groups. The TracOne installs without drilling and Thule rates it at 800 lb, while the TracRac Pro 2 steps up to 1,000 lb with corner bracing, ARC cleats and integrated toolbox mounts. The TracRac SR slides along a vehicle-specific base rail, sold separately, and Thule rates it at 1,250 lb, with the Utility Rack bringing the same idea to service bodies. Every Thule rating assumes a properly installed rack with weight spread evenly.

System One truck racks come as two rigs on a shared base. The pickup Contractor Rig is rated at 1,000 lb, or 1,250 lb with Heavy I.T.S. gussets, and its extension beams carry a crossmember out over the cab. The Utility Rig stands on free-standing trusses with a 600 lb working load rating, and its rear truss lifts out in seconds.

At the top of each range the ratings meet at 1,250 lb, so the choice turns on design rather than capacity.

Our team checks each TracRac or System One model against your make, year and bed length before we quote.

TracRac Truck Racks

Bed Access, Mounting and Tie-Downs on TracRac and System One

Bed access is the clearest split. A TracRac SR moves its crossbars along the base rail to suit each load and lifts off when the bed must be clear. A Christensen rig stands on Pick-up Traks that attach to the inside lip of the bed rail, and the maker says no further holes go into the truck once they are in. The whole System One Contractor Rig unbolts in three to five minutes, with the Traks left in place as a cargo restraint and the base of the system.

Tie-downs differ too. TracRac relies on ARC cleats, T-track and load stops, with Locking TracKnobs and base rail tie-downs for the SR and Utility Rack. The New Jersey rigs build tie-downs into the frame through its Integrated Tie-Down System, where Work Winches mount in the Heavy I.T.S. gussets and become part of the rack.

Long material and boxes follow the same pattern. The TracRac cantilever extension adds 32 inches of carrying length over the cab and the Pro 2 carries integrated toolbox mounts, while Contractor Rig extension beams run 102 to 156 inches and its gussets hang top-side and low-side boxes off the bed floor.

We install truck boxes as well as racks, so a crossover or side box can go on with either rack in one visit.

System One Contractor Rig

TracRac and System One in a Mixed Fleet

Many fleets run pickups beside vans and service bodies. Thule TracRac covers service bodies with its Utility Rack, while Christensen also builds van roof racks in the same I.T.S. series as its pickup rigs, so a fleet can match its tie-down habits across vehicles.

To compare more makers for the same trucks, browse our pickup rack and ladder brands hub.

TracRac by Thule

Choosing TracRac or System One for Your Pickup

Start with how often the bed needs to be clear. A truck that swaps between ladder runs and tall loads such as cabinets or a mower gains from a sliding TracRac SR. A truck that carries ladders lightly a few times a month may need no more than a drill-free TracOne. A contractor hauling flexible trim or conduit far over the cab, or wanting winches and hanging boxes built into the rack, will find the Contractor Rig suits that work.

Then think about the rest of the rack system. TracRac sizes its Pro 2 and SR in compact, full-size and super duty versions, with Tacoma-specific Pro 2 models, and the SR base rail has its own fit list. Christensen matches extension beam length to each cab and bed, and a full request should include both.

Fleet color is the last detail, and we offer custom powder coating on new System One truck rack purchases.

Send us the truck, bed length and loads, and we will quote TracRac and System One options side by side on our 603-434-6911 or 508-754-3030 lines.

TracRac or System One, Installed on Your Truck

Whichever design fits your work, Nation Wide Ladder installs a TracRac or System One rack matched to your bed, and our own trucks deliver it door to door across New England.

TracRac or System One FAQs

Is TracRac or System One stronger?

At the top of each range they match. Thule rates the TracRac SR and Utility Rack at 1,250 lb, and Christensen rates its Heavy I.T.S. Contractor Rig at 1,250 lb.

Do TracRac and System One racks need drilling?

The TracOne and the SR base rail install without drilling, and Christensen says no further holes are needed once its Pick-up Traks are attached.

Which rack slides along the bed?

The TracRac SR slides on a vehicle-specific base rail sold separately. Contractor and Utility Rigs stay fixed but remove in minutes.

How do tie-downs differ between TracRac and System One?

TracRac uses ARC cleats, T-track and load stops. Christensen builds Work Winches into its Heavy I.T.S. gussets as part of the rack.

Can tool boxes mount with TracRac or System One racks?

Yes. The TracRac Pro 2 has integrated toolbox mounts, and Heavy I.T.S. gussets carry top-side and low-side boxes on hangers.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder