Resources

Van Cargo and Ladder Racks Compared, Platforms, Crossbars, Clamp and Drop Down Mechanisms, Conduit Carriers and More

What a multi-bar cargo platform does that a ladder mechanism does not, and the reverse, with the Holman, Vantech and Weather Guard roof systems that suit pipe, lumber, ladders or a mix.

Picking between van cargo and ladder racks starts with what rides on your roof most days, because a platform built for mixed loads and a rack built around ladders solve different problems. Nation Wide Ladder supplies and installs both, and we compare Holman Pro III cargo platforms and crossbar racks, Vantech H1, H2 and H3 systems and the Weather Guard Safari against Clamp & Lock and drop down ladder mechanisms, conduit carriers and rollers.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Van Cargo Platforms Do That a Ladder Rack Does Not

A ladder rack is built around one job, while a cargo platform is built for whatever the day brings. Plumbers with ten foot lengths of copper and PVC, HVAC crews with line sets and duct, and carpenters with trim stock all need a van roof that takes mixed loads and offers tie-down points in several places. A cargo platform runs side rails along the roof with crossbars between them, so a load is supported at more than two points along its length. Flexible material sags less, short items have somewhere to sit, and straps can anchor wherever the load falls.

The Holman van cargo racks show the idea. The 8016A Pro III HD aluminum rack is a tube-style platform with five crossbars, a front wind deflector and a rear roller bar that lets long material slide on from the back of the van. Weather Guard takes the same approach with its steel Safari van rack, which uses eight cross members on vans with rain gutters and accepts cargo up to 4 ft wide.

The trade-off is that ladders on a cargo platform are tied down rather than locked in place.

We have served contractors for over 50 years, and we can tell you whether your loads call for a platform or a dedicated rack.

Holman Van Cargo Racks

Where Van Ladder Mechanisms Earn Their Place

A crew that takes ladders off the van roof at stop after stop gains the most from a mechanism. With Holman Clamp & Lock ladder racks, an extension ladder sits on crossbows under an arm that clamps over the rail, so nobody unties a strap at each job. A drop down rack goes further on tall vans, lowering ladders beside the van with a pull of a handle. Electricians, telecom crews and service technicians who climb all day are the usual buyers.

A ladder mechanism is less suited to bundles of pipe or sheet goods, which is why many vans that run one also carry a conduit carrier. Holman sells a PVC conduit carrier kit that stores long items in a 6 inch pipe you supply, and Weather Guard offers an optional cross member that takes a conduit carrier on its EZGLIDE2 drop down rack.

The honest test is to count how many times a day ladders come off the van. If the answer is many, a mechanism pays back in time and strain. If ladders ride along once a week beside pipe and lumber, a cargo platform usually serves the van better.

Our team weighs your ladder count and loading routine against each style before suggesting one.

Holman Clamp & Lock Ladder Racks

Van Cargo and Ladder Rack Makers Compared

Vantech builds both kinds of roof. Its Vantech van roof racks include the H1 Series on 2 by 1 inch rectangular crossbars with eyehooks on each mounting base, and the Vantech H2 and H3 systems, where the H2 spaces its crossbars 16 inches apart with an adjustable rear roller and the H3 is a three-bar aluminum rack sized to each van.

To see the other makers we carry for van cargo and ladder work, open our roof rack and ladder brands hub.

Vantech Van Roof Racks

Crossbar Racks Between Cargo Platforms and Ladder Mechanisms

Some vans need neither a full platform nor a mechanism. A two-bar crossbar rack carries a ladder or a few lengths of material with a bar at the front and rear of the roof, adds less weight and wind noise than a platform, and sits lower when nothing is on it. The Holman van crossbar racks come in steel and HD aluminum, with a matching middle bar for short cargo and the 40831 aluminum rear roller bar for loading long items alone.

The catch is that every load must be strapped each time. Holman retractable ratchet straps, in 1 inch by 6 foot (40830) and 2 inch by 7 foot (40850) pairs, stay attached to the rack and wind back in. A crossbar setup can also be a first step, with a third bar, a roller and straps added as the van’s work settles, or a move up to a platform or mechanism later.

Material matters on any van roof. HD aluminum keeps weight off the van and resists road salt, while steel takes rough loading in stride, and Holman offers its cargo, crossbar and Clamp & Lock designs in both.

We install the rack, bars and straps on your van, so spacing and mounts are set correctly from the first load.

Holman Van Crossbar Racks

Choosing Van Cargo and Ladder Racks for a Mixed Fleet

Fleets rarely need one answer for every van. A plumbing van hauling pipe suits a cargo platform with a conduit carrier, a service van climbing at every call suits a Clamp & Lock or drop down rack, and a light maintenance van may be well served by two crossbars and straps. Matching the roof to each van’s work, while keeping the same maker across vans of a model, means any crew can load any vehicle.

Fit comes before style. The Holman 8016A covers low and standard roof vans, Vantech matches its vehicle racks by make, model, wheelbase and roof height, and the Weather Guard Safari needs rain gutters. Check the roof type of each van before choosing between cargo and ladder setups, and remember that whatever rides on top counts against the van’s payload alongside shelving inside.

Load the van sensibly once the rack is on. Tie long material down at more than one crossbar, keep heavy cargo centered between the rails and recheck straps after the first few miles.

Both of our showrooms keep Saturday morning hours, so you can talk through a roof plan for each van without losing a workday.

Van Cargo and Ladder Racks Quoted for Your Roof

Send us your vans and what rides on each roof, and Nation Wide Ladder will quote, deliver and install van cargo and ladder racks with the mount kits and carriers that suit them.

Van Cargo and Ladder Racks FAQs

What is the difference between van cargo and ladder racks?

A cargo rack is a platform of side rails and several crossbars for mixed loads. A ladder rack is built around carrying ladders, often with a clamp or drop down mechanism so they load quickly.

Can a van cargo rack carry ladders?

Yes, but ladders on a cargo platform are tied down rather than locked, so crews who load ladders all day may prefer a Clamp & Lock or drop down rack.

Which cargo rack suits a plumbing van?

A platform such as the Holman 8016A Pro III, with five crossbars and a rear roller, paired with a conduit carrier for long pipe.

Is a crossbar rack enough for a van?

For occasional ladders or a few lengths of material, often yes. Every load must be strapped, and a middle bar helps with shorter cargo.

Do you install van cargo and ladder racks?

Yes. We install racks, mount kits, conduit carriers and straps from Holman, Vantech and Weather Guard.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder