Holman Truck Racks & Equipment
Holman Pro II Truck Rack, Complete Racks, Cap Racks, Body Racks, Side Channels, Legs, Bars and Guards
2 inch high-tensile tube racks for half-ton and Super Duty pickups, sold complete or as side channels plus legs and bars, with bed rails, taller legs, extra crossbars and window guards.
Ladders, pipe and lumber over a full-size pickup every working day wear out a light rack, so for hard use we fit the Holman Pro II truck rack. At Nation Wide Ladder we list the Pro II in complete racks for standard, extended and crew cab trucks, cap racks for capped beds, and racks for service and platform bodies, and we install what we sell. The Holman Pro II range also comes as side channels, legs and bars, with bed rails, an extra crossbar, 6 inch taller legs and window guards to finish the build.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Runs a Heavy-Duty Holman Pro II Rack
Some trucks carry a ladder now and then. Others leave the yard every morning with extension ladders, conduit, steel pipe and a stack of lumber overhead. The Holman Pro II is aimed at the second group, including electrical and mechanical contractors, framers, utility crews and fleets that run the same pickup hard for years.
A rack over the bed changes how a pickup works. Long material rides over the cab instead of hanging off the tailgate, and the bed stays open for boxes, fittings and loose stock. On a heavily used truck that division of space can matter as much as the strength of the rack.
The Pro II covers the trucks most contractors drive. Holman engineers one set of parts for half-tons from GM, Ram, Toyota and Ford and another for F-250, F-350 and Ram Mega Cab trucks, and several cap racks add Nissan. If you choose a Holman Pro II truck rack, the same family comes in versions for capped trucks and for service or platform bodies, so a mixed fleet can standardize on one design. Lighter loads and mid-size pickups suit the medium-duty Holman Pro III.
Bring your truck to our Windham NH or Worcester MA showroom for a free in-person estimate on the Pro II setup that suits it.
Holman Pro II Truck Models, Part Numbers and Components
Complete Holman racks are named by cab, bed length and truck class. The Holman Pro II rack for standard cab long bed half-tons is part 04001, and its F-250 and F-350 counterpart is 04004. Extended and crew cab racks come as 06001 and 06004 for 96 inch beds and as 06101 and 06104 for 78 inch beds, split the same way between half-ton and heavy-duty trucks.
Capped trucks take dedicated Holman cap racks, such as 04011 for standard cab long beds and 06011, 06013, 06111 and 06113 for extended and crew cabs. Platform and service bodies have their own Holman racks, 78030 and 78020, for 8 foot bodies on standard cabs.
The Holman system can also be bought in parts. Side channels run along the bed rails and come as 04000 for standard cab 96 inch beds and as 06000 and 06010 for extended cab 96 and 78 inch beds. Legs and bars complete the rack, with 01000 and 01110 for half-tons and 01040 and 01130 for Super Duty trucks, so a fleet can replace one damaged section.
Send us a list of the Holman part numbers you need and we will quote the full rack or just the pieces.
Holman Pro II Tube, Bed Rails and Truck Protection
Our Holman listings put the Pro II at 2 inch high-tensile mechanical tube with a 0.083 inch wall. Holman reinforces the joints between legs and crossbars with gussets, and that junction is where a loaded Holman frame takes the most stress.
How the rack meets the truck matters as much as the tube. Holman full-length bed rails, offered in 72, 78 and 96 inch lengths as parts 31270, 31280 and 31300, spread the load along the bed sides, protect them from damage and give tool boxes a solid mount. They do not work on trucks with a camper shell, so a capped truck relies on the Holman cap rack design.
Two more Holman add-ons deal with real loads. The 31110 extra crossbar can be positioned anywhere along the rack to support short, heavy items. Window guards protect the rear glass, with the 3108SD made for the 01040, 04004, 06004 and 06104 heavy-duty racks and the 31080 for the 01000 legs and bars. For height, 6 inch taller legs (31530 for the 01110 and 31540 for the 01130) lift a capped Holman setup further above the shell.
We install the Holman rack with its bed rails, guard and extra crossbar in one visit, so every bolt is set before the first load.
Matching a Holman Pro II Truck Rack to Your Pickup
Three questions decide the Holman part numbers. First, is the truck a half-ton or a heavy-duty model? The two classes use different legs and different complete racks. Second, what is the cab and bed? Measure the bed rather than trusting the trim name, since a short bed is 78 inches and a long bed 96 inches in the Holman range. Third, will the bed stay open or wear a cap? That choice decides between a standard Pro II and a Pro II cap rack.
If you plan to add a cap later, say so when you order. The with-cap legs and bars are a separate part from the open-bed set, so on a rack bought in parts the legs can often be changed while the side channels stay. Service and platform body trucks follow their own sizing by body length, laid out with our Holman service body ladder racks.
Check the Holman Pro II regularly. Look over welds and gussets for cracks, tighten clamps and mounting bolts after the first few hundred miles and then at each service, and tie loads down at more than one crossbar.
Our team matches your truck class, cab, bed and cap plans to the right Holman parts and can look up the Holman rating for your rack.
Holman Pro II Truck Racks Across a Mixed Fleet
Few fleets run one kind of vehicle. A contractor might pair a Pro II pickup with a shelved van and a service body truck, and choosing roof and bed equipment that loads the same way across all of them saves time for every crew that swaps trucks.
To see Holman next to the other makers we stock, open our ladder and truck equipment brands hub and compare them at a glance.
Order a Holman Pro II Truck Rack
After more than 50 years serving contractors, we know a full-size pickup that works every day needs a heavy-duty Holman Pro II truck rack built from the right complete kit or parts, and our own trucks deliver it door to door across New England. Browse our Holman Pro II racks and components, compare Holman truck racks and the rest of our Holman truck and van equipment, then send us your cab, bed and truck model.
Holman Pro II Truck Rack FAQs
What tubing is the Holman Pro II truck rack made from?
Holman builds the Pro II from 2 inch high-tensile mechanical tube with a 0.083 inch wall, according to our product listings.
Is there a separate Holman Pro II for F-250 and F-350 trucks?
Yes. Holman splits the Pro II between half-ton trucks (GM, Ram 1500, Tundra, F-150) and heavy-duty trucks (F-250, F-350 and, on many racks, Ram Mega Cab), for example 04001 and 04004 for standard cab long beds.
Can I fit a Holman Pro II on a truck with a cap?
Yes. Holman makes Pro II cap racks for standard, extended and crew cab trucks, and 6 inch taller legs (31530 and 31540) can raise a capped Pro II further.
Do Holman bed rails work with a camper shell?
No. Holman does not offer its full-length bed rails for capped trucks, so a capped truck relies on the cap rack design.
Can I buy a Holman Pro II in parts?
Yes. Side channels such as 04000, 06000 and 06010 pair with legs and bars such as 01000, 01110, 01040 and 01130 to build a Pro II, and single sections can be replaced.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.











