Resources

Truck Tool Box Types From Crossover and Saddle to Lo-Side, Hi-Side, Topsider, Chest, Wheel Well and More

Where each of the main types mounts on a pickup truck, from rails behind the cab to the bed floor, with Weather Guard and K&W heights, lengths and the measurements that decide fit.

Sorting through truck tool box types comes down to where each one mounts, and the wrong choice costs bed space, rail space or reach on every job. Nation Wide Ladder measures your pickup and compares the crossover and saddle tool box, the lo-side, hi-side and topsider, the chest and wheel well models and the underbody model for flatbed trucks, from Weather Guard and K&W, then installs the one that suits your work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Crossover and Saddle Truck Tool Box Types Spanning the Rails

A crossover tool box rests on both bed rails behind the cab, so the truck floor stays open for sheet goods, pallets and long material while tools ride locked up top. Weather Guard sells this style as saddle and crossover models. Its deep 123 saddle measures 72 by 20 by 24 inches and holds 15 cubic feet, while the 117, 121 and 127 series trade depth for bed space, from the wide 117 at 27.5 inches front to back to the 121 and 127 at 20 inches. K&W builds its 600 Series crossover 20 inches wide in standard and low profile versions, with model lengths from 68 to 72.5 inches, plus a wider and deeper 700 Series for more room.

Length has to match the truck. Rail widths differ from one pickup to the next, which is why K&W lists several lengths and Weather Guard asks for the distance between the inner edges of the rails before recommending a model. A crossover suits a contractor who needs the floor and locked storage on the same truck, and it leaves room overhead for a ladder rack. On the deepest saddle models, Weather Guard warns that a wheel well sitting close to the bulkhead can stop the model from sitting down, so that gap is worth a tape measure too.

We check rail width and the bulkhead gap on your pickup before quoting a crossover, so the model fits the truck it goes on.

Weather Guard Saddle Boxes

Lo-Side, Hi-Side and Topsider Tool Box Types Along a Truck Bed

Side mount models run along one truck rail and put tools within reach from the ground, which saves a plumber or electrician climbing into the bed at every stop. Height is what separates these types, and it changes how much tool storage each truck rail carries. Weather Guard lo-side models 174 and 184 stand 13.25 inches tall, and its hi-side aluminum model stands 16 inches tall in lengths from 46 to 96 inches. K&W lists its 300 Series side mount tool box at 12 inches high and the HD 350 at 17 inches, while its Standard 100 and HD 150 topsiders reach about 20 inches, in 68, 72, 87 and 96 inch lengths.

A lower side model keeps the mirror view and lets material slide over the top, while a taller hi-side or topsider holds more along the same rail. Base width matters as much as height, because each rail carries it and the bed floor gives up that width on both sides. K&W puts the 300 Series on an 8 inch base against 11.5 inches for the HD 350. Many trucks run a matched pair of Weather Guard lo-side or hi-side models, one on each rail, and some add a crossover in front for a fully covered bed.

We install side models in matched pairs, mounting both rails in one visit so the tool box on each side sits level on your truck.

Weather Guard Lo-Side and Hi-Side Boxes

Chest and Wheel Well Truck Tool Box Types on the Bed Floor

A chest tool box sits on the bed floor against the front wall and leaves both rails free, which suits a truck carrying a ladder rack or a tonneau cover, at the cost of some floor length. The K&W range includes a 500 Series chest at 24 inches wide and 20 inches high, and a 550 Series that is 20.5 inches wide at the top but narrows to a 15 inch base so it clears wheel wells and fifth wheel setups. Both come in 36, 48 and 60 inch lengths, with a notched back lid that opens close to the cab or a headache rack.

Weather Guard answers the same problem with wheel well models 644, 674 and 654, angled to clear the wells and suit fifth wheel trailer setups, with a notched rear lid, in 36, 46 and 58 inch lengths. Its measuring advice gives one rule for both floor types, which is that the bottom has to be narrower than the gap from the bulkhead to the start of the wheel well. Flatbed and service body trucks add an underbody model that mounts beneath the deck, and the Weather Guard truck storage range lists those from 24 to 60 inches. Weather Guard notes that none of its truck storage is fire rated, so diesel belongs in a transfer tank rather than a chest.

Bring your bed measurements to our Windham, NH or Worcester, MA showroom, where a free consultation lets you open a chest lid and a wheel well model side by side.

K&W Manufacturing

Matching a Truck Tool Box to the Rack Above It

Most working pickups carry a rack as well as storage, and the two compete for the same rails. A crossover has to sit level with the feet of a headache rack, which is why Weather Guard ships leveling spacers with its headache racks, while a chest or wheel well model leaves the rails open for an over-bed ladder rack. Settling the rack first usually settles which of the truck tool box types will fit around it.

You can set the rack and storage makers we carry against each other in our truck equipment and ladder brands hub.

Truck Tool Box Types Fitted and Installed for Your Pickup

Rail width, floor space and how often you reach in from the side decide between truck tool box types, and Nation Wide Ladder has served contractors and homeowners for over 50 years with Weather Guard and K&W models fitted to the truck. Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts with your measurements for a quote.

Truck Tool Box Types FAQs

What are the main truck tool box types?

Crossover or saddle models span the rails behind the cab, lo-side, hi-side and topsider models run along one rail, chest and wheel well models sit on the bed floor, and underbody models mount beneath a flatbed or service body deck.

Which tool box type keeps the truck bed floor clear?

A crossover or saddle tool box rests on both rails behind the cab, so the truck floor stays open for long material.

Which truck tool box types work with a fifth wheel hitch?

An angled chest such as the K&W 550 Series, or a Weather Guard wheel well model such as the 644, 674 or 654, is shaped to clear the wheel wells and fifth wheel setups.

How tall is a lo-side truck tool box compared with a hi-side?

Weather Guard lists its lo-side models at 13.25 inches tall and its hi-side aluminum model at 16 inches. K&W topsiders stand about 20 inches.

How do I measure a truck for these tool box types?

Weather Guard asks for the distance between the inner edges of the rails, the bed wall height, the bed length and the gap from the bulkhead to the wheel well, plus the year, make and model.

Are truck tool boxes fire rated?

Weather Guard states that none of its truck storage is fire rated, so keep fuel in a transfer tank made for it.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder