System One Truck Racks
System One Utility Rig Racks With Free-Standing Pickup Trusses, Two and Three Truss Van Builds, Tie-Downs and More
Free-standing aluminum trusses rated to 600 lb on pickups, 400 and 600 lb van layouts, the Heavy I.T.S. and Standard series, and how the rack comes apart for full bed access.
Carrying ladders without giving up the bed is the everyday job of the System One Utility Rig, and Nation Wide Ladder fits it for tradespeople and homeowners across New England. We list the Heavy I.T.S. Utility Rig for pickups with a 600 lb rating and a removable rear truss, and the I.T.S. Utility Rig for vans in a 400 lb two-truss layout with an optional third truss, plus the Standard series, ratchet tie-downs and Work Winches that go with them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who the System One Utility Rig Suits Best
System One designs the Utility Rig for people whose roof load is mostly long and rigid. An electrician moving a 24 foot extension ladder between jobs, a painter with planks and a step ladder, or a homeowner hauling a canoe or kayak all need two or three strong support points rather than a full cage over the cab.
The pickup Utility Rig stands on free-standing trusses, so nothing reaches forward over the cab and nothing ties the front and rear together overhead. That keeps the build light and simple. System One calls it a versatile and economical rack, and the Standard series comes apart in seconds, with the trusses stored in the bed or on a garage wall when the truck has other work to do.
If you carry flexible material such as trim or thin-wall tubing, a rack with more crossmembers gives better support. For ladders, lumber and boats, this rack is usually the better fit, with less weight on the truck and quicker access to the bed.
Our team looks at your vehicle and what you carry, then confirms which System One Utility Rig and truss count will fit before anything is ordered.
System One Utility Rig Models We List for Pickups and Vans
The System One Heavy Duty Utility Rack is the pickup build in Heavy I.T.S. form. System One gives its free-standing trusses a 600 lb working load rating, the frame is rust-free aluminum, and it can be fitted with A100 sliding cargo anchors and AWW Work Winches. The heavy gussets also take tool box hangers for top-side or low-side boxes.
For vans, the System One I.T.S. Utility Rack starts as a two-bar layout rated at 400 lb, with a third bar available. System One rates the three-truss van version at 600 lb and notes that the center truss also supports more flexible loads. Every System One van rack is part of the I.T.S. series, so winches can go on at any time, and a van Utility Rig can later move up to a Contractor Rig.
Each build includes Ladder Glide low-friction inserts, and the pickup version adds Ladder Life anti-wear inserts, a side stop at each upper corner, plus color inserts.
We install the rack on your truck or van ourselves, so trusses, Traks and anchors are set and checked in a single visit.
Heavy I.T.S. or Standard Series for a Pickup Utility Rig
On pickups the System One Utility Rig comes in two series, and the difference sits in the upper corner gussets. The Heavy I.T.S. gusset is larger with thicker walls, and it carries the bores for the Work Winch tie-down system plus the T-slot that tool box hangers bolt into. If you plan to add top-side or low-side boxes or winches, the Heavy series is the version to buy.
The Standard series suits a sport or utility role. It will not take Work Winches, but it does accept System One ratchet tie-downs, which use gold zinc plated steel hardware with 4 or 6 foot straps and have only a single loose end that hooks under the crossmember. They are far better than rope or bungee cords, even if a winch is quicker to use.
Both series use the same Pick-up Traks, Ladder Glide inserts and aluminum trusses, so the choice comes down to tie-down method and tool boxes.
When the rack should match your truck or fleet, we offer custom powder coating on new System One truck rack purchases.
Bed Access and Daily Care for a System One Utility Rig
The rear truss on the pickup version lifts out in seconds, which opens the bed to tall loads such as appliances or a stack of drywall loaded from the tailgate. The front truss comes off just as easily, leaving the Pick-up Traks on the bed rail to act as a cargo restraint and rail protector, and as the base for the whole modular system. An aluminum van rack also avoids the rust stains that steel brackets can leave running down the side of a van.
Load ladders from the rear across the Ladder Glide insert, keep the heaviest item centered between trusses, and tighten every strap before driving. Check truss bolts and anchor knobs every few months, and look over the inserts for wear where ladders rest.
If the truck spends the off season without a rack, store the trusses together with their hardware so refitting takes minutes.
Both of our locations open Saturday mornings, so you can bring the truck in and talk through System One Utility Rig fitment without losing a workday.
Planning a System One Utility Rig Around Ladders and Tool Boxes
A light rack works best when the ladders on it, the tool boxes under it and the gear in the bed are planned as a single layout. Ladder length decides truss spacing, and box choice decides whether the Heavy series is needed.
To weigh this rack against other makers, open our ladder and truck equipment brands hub and compare them side by side.
Get a Quote on a System One Utility Rig
Nation Wide Ladder has served homeowners and contractors for over 50 years, and we size the System One Utility Rig to the ladders and loads you carry. Compare it with other System One truck racks, read about the System One brand, and browse our System One store before requesting a quote.
System One Utility Rig FAQs
What is the load rating of the System One Utility Rig?
System One rates the pickup Utility Rig trusses at 600 lb. The van version is rated at 400 lb in its two-truss form and 600 lb with three trusses.
Does the System One Utility Rig accept Work Winches?
The Heavy I.T.S. pickup version and every van Utility Rig accept Work Winches. The Standard pickup series takes ratchet tie-downs instead.
Can I mount tool boxes on a System One Utility Rig?
Yes, on the Heavy I.T.S. version. Its gussets carry the T-slot for tool box hangers used with top-side and low-side boxes.
Can a van Utility Rig be upgraded later?
System One says its van Utility Rig can be upgraded to a Contractor Rig at any time, and a third truss can be added to the two-truss layout.
How quickly does the System One Utility Rig come off a pickup?
The rear truss lifts out in seconds and the front truss is just as easy, leaving the Pick-up Traks on the bed rail.
Need help choosing the right System One equipment?
Talk to the team or send us your list and we will put a quote together.






