Ladders by Height
28 ft Extension Ladders for Roof Access in Aluminum, Fiberglass, Aerolite and Three-Section Builds and More
Roof access over two-storey eaves and gables, weights and closed lengths by series, Type II to Type IAA ratings and utility options from Werner and Louisville.
Roof access above a two-storey eave is the job that most often calls for 28 ft extension ladders, and Nation Wide Ladder sets the Werner and Louisville options side by side for roofers and contractors. We compare the aluminum AE2200, AE3200, AE4200, D500-2, D1200-2, D1300-2 and D1500-2, the fiberglass FE3200, D6200-2, D6200-3 and D7100-2, and the Werner Aerolite B7100-2 and B7100-2X, so weight, closed length and duty rating can be weighed before you order.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
28 ft Extension Ladders for Roof Access Over a Two-Storey Eave
A 28 earns its place when the job goes onto the roof rather than along the gutter. Werner’s reach guide gives a 28 ft extension ladder an average reach of 27 feet, and Louisville lists 27 feet 7 inches of maximum reach for its 28 ft models, both based on a 5 foot 7 inch person with 12 inches of reach. Louisville builds them from two 14 foot sections, with a maximum extended length of 25 feet once the overlap is taken up.
That extra length matters for roofers, chimney sweeps and anyone stepping off at a two-storey eave. OSHA requires the side rails to run at least 3 feet above the landing when a ladder gives access to it, and Werner’s guidance of buying an extension ladder 7 to 10 feet longer than the top support point builds that clearance in. Gable vents, the upper corners of a colonial and the higher eaves of houses on a sloping lot are also natural jobs for this size. Whatever the job, keep to the top standing level Werner sets, four rungs down from the top of the fly.
Call either showroom with the eave height and roof pitch, and our team will check which 28 ft model gives you the clearance OSHA asks for before we quote it.
Weight and Closed Length of 28 ft Extension Ladders by Series
At 28 the ladder starts to feel its length on the walk from the truck. Louisville lists the AE4228 at 48 pounds, the AE3228 at 53, the AE2228 at 55 and the fiberglass FE3228 at 58, with a closed height of about 172 to 173.5 inches. Werner offers two ways to trim that load. The Aerolite B7128-2, rated Type IAA, is described by Werner as 25 percent lighter than a standard 375 pound ladder, and the three-section D6228-3 divides the same size into three shorter sections for a more compact closed ladder.
Fiberglass 28 ft extension ladders weigh more than aluminum at the same rating, yet they are the choice around service drops and overhead wiring because the rails are nonconductive. Aluminum suits painters, gutter installers and siding crews working well clear of power, where the lighter carry pays off over a long day. On the Werner D-series 28 ft extension ladders, the base and fly also separate, so the base can serve on its own as a single ladder elsewhere on the site.
Our own trucks deliver door to door across New England, so a heavy 28 does not have to travel home on a borrowed trailer.
Choosing a Duty Rating for 28 ft Ladders Carrying Roofing Loads
Roof work tends to mean heavier loads on the rungs, since a climber may carry tools, flashing or a bundle at once, and every one of those counts toward the rating. At 28 there are three Type IAA choices rated for 375 pounds, the aluminum Werner D528-2, the fiberglass D7128-2 and the lightweight Aerolite B7128-2. Werner’s D7100-2 rails also come pre-pierced for a V-rung and cable hooks.
Type IA at 300 pounds covers the Louisville AE2228 and FE3228 and the Werner D1528-2, D6228-2 and D6228-3. Type I at 250 pounds comes in the Louisville AE3228 and Werner D1328-2, and Type II at 225 pounds in the AE4228 and Werner D1228-2 for lighter household use. For utility crews, the Aerolite B7128-2X9085 adds a factory cable hook and V-rung for strands and poles up to 10 inches, and the B7128-2CL and B7128-2X9295 add a leveler system for uneven ground. If the same crew also climbs near power, a fiberglass Type IAA extension such as the D7128-2 covers both needs in one ladder.
We help you select the rating by adding up the climber, gear and material, so the 28 we quote is matched to the heaviest load it will carry.
How 28 ft Ladders Fit Into Roofing and Exterior Access Kits
A roof crew often runs a 28 with roof brackets, ridge hooks and a leveler for the uneven ground beside a foundation. Each extension and step size is compared in our guide to ladders by height, while the Werner 28 ft range and Louisville 28 ft range cover each series in depth. Roof brackets and ridge hooks sit in our roofing range, and a 28 ft extension gives the length to clear the eave before they come into play.
You can line up roof brackets, staging and fall protection from other makers in our ladder and truck equipment brands hub.
Getting a Quote on 28 ft Extension Ladders for Roof and Gable Work
Roof access depends on clearing the eave with a ladder rated for what the roofer carries, which is why we check reach and rating together before we quote 28 ft extension ladders. Send us the eave height and the heaviest load, or call 603-434-6911 or 508-754-3030, and ask about the fiberglass Werner D7100-2 series for heavy loads near power.
28 Ft Extension Ladders FAQs
Is a 28 ft extension ladder tall enough to get onto a two-storey roof?
Werner gives an average reach of 27 feet and Louisville a maximum reach of 27 feet 7 inches. OSHA wants the rails 3 feet past the landing, so compare your eave height with both figures.
How much do 28 ft extension ladders weigh?
Louisville lists 48 to 55 pounds for its aluminum 28 ft models and 58 pounds for the fiberglass FE3228.
Which 28 ft models are rated Type IAA?
The Werner D528-2 in aluminum, the D7128-2 in fiberglass and the Aerolite B7128-2 range, all rated for 375 pounds.
Does a 28 ft model come in three sections?
Yes. The Werner D6228-3 is a three-section Type IA fiberglass ladder.
What is the closed height of a Louisville 28 ft model?
Louisville gives about 172 to 173.5 inches, built from two 14 foot sections.
Need help choosing the right ladder equipment?
Talk to the team or send us your list and we will put a quote together.









