Ladders by Height

24 ft Extension Ladders in Aluminum, Fiberglass, Aerolite Utility and Leveler-Equipped Builds and More

Reach for two-storey gutters, siding and trim, aluminum and fiberglass ratings from Type II to IAA, Aerolite cable hook and leveler versions, and weights by series.

Two-storey gutters, siding and trim are the classic jobs for 24 ft extension ladders, and Nation Wide Ladder offers Werner and Louisville models with delivery across New England. At this height you can choose aluminum from the AE2200, AE3200, AE4200, D500-2, D1200-2, D1300-2 and D1500-2 series, fiberglass from the FE3200, D6200-2, D6200-3 and D7100-2, or a Werner Aerolite B7100-2 or B7100-2X with V-rung, cable hook and leveler options.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

24 ft Extension Ladders for Two-Storey Gutters, Siding and Trim

The 24 is a common choice for second-floor work on a house. Werner’s reach guide gives a 24 ft extension ladder an average reach of 23 feet, and Louisville lists 23 feet 8 inches of maximum reach for its 24 ft models, both assuming a 5 foot 7 inch climber with 12 inches of reach. Louisville builds these from two 12 foot sections and gives a maximum extended length of 21 feet. In practice that covers gutters, siding, window trim and soffit vents on a typical two-storey home, along with painting and caulking along the same wall.

Werner recommends an extension ladder 7 to 10 feet longer than the top support point, which allows for the overlap between sections and, on roof jobs, for the rails to clear the edge. OSHA’s figure for that clearance is at least 3 feet past the landing. Keep to Werner’s highest standing level of four rungs down from the top, and if a gable peak or a dormer sits higher than your gutter line, size for that point instead.

Bring a photo or the measured gutter height to either showroom, and our team will compare it with the reach figures for each 24 before you settle on one.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Aluminum or Fiberglass 24 ft Extension Ladders From Werner and Louisville

Both makers cover the 24 in aluminum at three ratings. Louisville offers the AE4224 at Type II for 225 pounds, the AE3224 at Type I for 250 and the AE2224 at Type IA for 300, and Werner matches them with the D1224-2, D1324-2 and D1524-2. Werner’s D524-2 takes aluminum up to Type IAA for 375 pounds at this size. Louisville lists its aluminum 24 ft models at 38 to 42 pounds, which makes them the lighter carry for painters and siding crews working away from power.

The fiberglass side suits electricians, roofers near service drops and anyone working by overhead lines, because the rails are nonconductive. Louisville’s FE3224 is rated Type IA, weighs 51 pounds and has the MAXLOCK rung lock and QuickLatch. Werner offers the Type IA D6224-2, the three-section D6224-3 for a shorter closed length, and the Type IAA D7124-2, whose rails take a V-rung and cable hooks. Louisville gives a closed height of about 148 to 149.5 inches for its 24 ft extension ladders, which is worth holding up against your rack length, and the three-section D6224-3 extension closes shorter for crews who carry inside a van.

Over 50 years of matching ladders to homeowners and contractors means we ask about power lines and load before material, so the 24 we quote fits the work.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Utility, Leveler and V-Rung Options on 24 ft Werner Aerolite Models

The 24 is where Werner’s Aerolite range adds its equipped versions. The B7124-2 is the plain Type IAA Aerolite, built with BOXLOK box rails and Traction-Tred tri-rungs and described by Werner as 25 percent lighter than a standard 375 pound ladder. The B7124-2CL adds a V-rung and a leveler system, which helps on sloped ground and against round or angled supports.

For utility and telecom crews, the Aerolite B7124-2X9085 comes with a factory-installed cable hook and V-rung for aerial work on strands and poles up to 10 inches, and the B7124-2X9295 adds the leveler system on top. Among the Louisville series we list at this height, the FE3200 and AE4200 come with steel swivel safety shoes that work tread down or in the spike position, while the factory-equipped utility versions come from Werner. If your crew already runs D7100-2 extension ladders, their pre-pierced rails let you add a V-rung and cable hooks later instead of buying a separate utility model.

We also install racks on trucks and vans, so we can set a 24 ft Aerolite or fiberglass ladder on a rack sized for the vehicle that carries it.

Louisville AE4200 Series – Type II Aluminum Extension Ladder

Pairing 24 ft Ladders With Stabilizers, Jacks and Planks

Second-storey work often adds a stabilizer to hold the ladder off the gutter, ladder jacks and a plank for siding, and a 6 ft step ladder for the porch or interior. Our ladder heights overview lays out every extension and step size, and the Werner 24 ft lineup and Louisville 24 ft lineup go deeper on each series. Ladder jacks hang from a pair of ladders, so it helps to quote two matching 24 ft extension ladders together when siding is on the list.

For staging, racks and fall protection from the other makers we stock, take a look through our ladder and truck equipment brands hub.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Quotes on 24 ft Extension Ladders With Delivery Across New England

Second-storey gutters, siding crews and utility work all meet at this size, so we quote 24 ft extension ladders by the job they will do, from plain aluminum to a cable hook Aerolite. Our trucks deliver across Connecticut, Rhode Island, Massachusetts, New Hampshire, Vermont and Maine, and the Werner D1300-2 series is a ready Type I aluminum option.

24 Ft Extension Ladders FAQs

Will a 24 ft extension ladder reach a two-storey gutter?

Werner gives an average reach of 23 feet and Louisville a maximum reach of 23 feet 8 inches for a 24, so measure your gutter height and compare it with those figures.

Which 24 ft extension ladders come with a cable hook?

The Werner Aerolite B7124-2X9085 and B7124-2X9295 come with a factory cable hook and V-rung, and the X9295 adds a leveler system.

How heavy is a Louisville 24 ft extension ladder?

Louisville lists 38 to 42 pounds for its aluminum 24 ft models and 51 pounds for the fiberglass FE3224.

What is the B7124-2CL?

It is the Werner Aerolite 24 rated Type IAA, fitted with a V-rung and a leveler system.

Is there a three-section 24 ft model?

Yes, the Werner D6224-3 is a Type IA three-section fiberglass ladder.

Need help choosing the right ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder