Resources

SRL Fall Clearance, Planning Free Fall, Arrest Distance, Anchor Position, Swing and Line Length and More

Free fall and deceleration limits, published arrest distances, Class 1 overhead and Class 2 foot-level anchoring, swing, worker weight and choosing a line length for the height under the work.

SRL fall clearance is the open height a worker needs under the walking surface so a self-retracting lifeline stops the fall before anyone strikes the level beneath, and a gap in that plan can defeat a system that is otherwise worn correctly. Nation Wide Ladder helps crews plan it across overhead Class 1 units, foot-level Class 2 units, personal SRL lengths from 6 to 11 feet and the anchors they hang from, using the arrest distances Werner publishes.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Goes Into SRL Fall Clearance Under the Work

OSHA sets the outer limits every plan has to respect. A personal fall arrest system must be rigged so the worker can neither free fall more than 6 feet nor contact any lower level, and it must bring the worker to a stop within a maximum deceleration distance of 3.5 feet. OSHA measures free fall at the harness attachment point and counts any SRL extension before the device locks as part of it, while deceleration distance is the travel after the device begins to work.

On an SRL, the published arrest distance wraps those two together. Werner lists a 24 inch maximum arrest distance for its Bantam and Max Patrol units anchored overhead, and ANSI Z359.14-2021 lets a Class 1 SRL take up to 42 inches, tested overhead with a 310 pound weight. Under that arrest distance hangs the rest of the body. OSHA puts the harness attachment point at the center of the back near shoulder level, so the feet sit well under the D-ring, and the fall clearance has to keep the feet, not only the D-ring, clear of the floor, grade or equipment beneath.

Our team helps you select an SRL whose published arrest distance fits the height you actually have under the work.

Anchor Position Changes SRL Fall Distance More Than Line Length

The anchor is the biggest variable. Werner’s 2021 classes split each SRL by where it ties off. Class 1 is for anchorage above the back D-ring and carries a blue marking, while Class 2 covers anchorage at or under the D-ring, carries a yellow marking and is also tested at foot level with a 310 pound weight. On a Class 2 SRL, ANSI requires the arrest distance to be printed on the label and in the instructions, and that printed figure is the one foot-level fall clearance is planned from.

Working out to the side adds swing, because a worker who falls away from the spot under the anchor travels in an arc as the line comes taut. Keeping the anchor close to overhead of the main work holds that swing down. Line length matters less than many buyers expect. Werner lists the same 24 inch overhead arrest distance on its 6 foot Bantam and its 11 foot Max Patrol and Baseline units, so a longer SRL widens the work area without lengthening the arrest while the anchor stays overhead.

Bring your roof or deck layout to a free consultation in Windham NH or Worcester MA and we will mark anchor spots against the fall clearance under each one.

Matching SRL Length to the Fall Clearance You Have

Once the anchor is settled, length becomes a working-area choice. 6 ft SRLs keep the unit light for a worker close to one anchor, while 7 ft and 9 ft SRLs add room for a lift basket or a short run of roof. 11 ft SRLs nearly double the working length of a 6 foot SRL for mezzanines and large rooftop units.

Whatever the length, Werner warns never to clip a lanyard onto an SRL to stretch its reach, since the answer to a short line is a longer unit. Weight belongs in the plan too. ANSI has lowered the minimum working weight to 110 pounds, and Werner notes that workers under that weight face higher initial arrest forces, so check the label range against the lightest and heaviest worker on the crew. The user instructions packed with each SRL carry the clearance details for that model and anchor position, and they take priority over any rule of thumb.

Send us each worker’s weight, anchor height and work area and we will quote SRL lengths to suit, by phone at 603-434-6911 in NH or 508-754-3030 in MA.

Werner 6 ft SRLs

Fall Clearance Starts With Access, Anchors and the SRL Together

Clearance depends as much on where the crew stands as on the device. The ladder or lift that reaches the work, the fall protection anchor the SRL hangs from and the fit of the harness all shape the distance a worker drops, and on most jobs they come from several makers. A roofer on an extension ladder, a fitter in a boom lift and a deck crew on staging each start from a different anchor height, which changes how much of the open air under them the SRL can use.

To weigh those makers against each other before you order, start from our ladder and truck equipment brands hub.

Werner Fall Protection Anchors

Plan SRL Fall Clearance Before the First Tie-Off

Over 50 years supplying contractors has taught us that SRL fall clearance comes down to the anchor, the published arrest distance and the open height under the work, and we work through all three with you before quoting units from the Werner self-retracting lifelines range. Tell us the height from the walking surface to the nearest obstruction under it, and we will check each SRL against that figure.

SRL Fall Clearance FAQs

How much SRL fall clearance do I need?

There is no single figure. It depends on the model, the anchor position and the user instructions, and OSHA requires that the worker never contacts a lower level, free falls no more than 6 feet and decelerates within 3.5 feet.

What arrest distance does a Class 1 SRL have?

ANSI Z359.14-2021 allows up to 42 inches for a Class 1 SRL tested overhead with a 310 pound weight. Werner lists 24 inches on its Bantam and Max Patrol units anchored overhead.

Does a foot-level SRL change fall clearance?

Yes. Foot-level tie-off needs a Class 2 SRL, and ANSI requires its arrest distance to be printed on the label and in the instructions, which is the figure to plan from.

Does a longer SRL need more fall clearance?

Not for the arrest itself when anchored overhead. Werner lists the same 24 inch arrest distance on its 6 foot Bantam and 11 foot Max Patrol, but working further from the anchor adds swing.

Can I add a lanyard to an SRL to reach further?

No. Werner says never to attach a lanyard to an SRL. Choose a longer SRL instead.

Does worker weight affect SRL fall clearance?

It affects arrest forces and the rating on the label. ANSI has lowered the minimum working weight to 110 pounds, and Werner notes lighter workers face higher initial arrest forces.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder