Louisville Ladder range

Louisville Extension Ladders in Fiberglass and Aluminum, from 16 Foot Two-Section Models to the 60 Foot AE1660

Fiberglass FE3200 and aluminum AE series extension ladders compared on duty rating, rung locks, shoes and weight, with the overlap, setup angle and landing rules that decide which length you actually need.

Louisville extension ladders take a crew from the ground to gutters, rooflines and upper floors, and the right one depends on rail material, duty rating and how much working height a given length really delivers. Nation Wide Ladder carries the fiberglass FE3200 and the aluminum AE1200, AE2200, AE3200, AE4200 and 60 foot AE1660, and our team helps you match length and rating to the building before you order.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Who Needs Louisville Extension Ladders and for Which Jobs

Louisville defines an extension ladder as a portable ladder that does not support itself, built from two or more sections that slide to set the height, and meant for one person at a time. That makes it the tool for reaching a roof edge, a second story window, a gutter line or a sign, wherever a stepladder runs out of height and a lift is more than the job needs.

Roofers, painters, siding and gutter crews, electricians and property managers all lean on them. The split that matters most is rail material. Louisville marks its fiberglass FE3200 as safe around electricity, while every aluminum AE series is marked as unsafe near live wiring, which is the deciding factor for anyone working near service drops or overhead lines.

Weight is the other side of that choice. Louisville lists a 20 foot fiberglass FE3220 at 42 pounds, while a 20 foot aluminum AE3220 comes in at 32 pounds. A crew raising a ladder dozens of times a day feels that difference, so aluminum earns its place where there is no electrical exposure.

Our team asks about overhead wiring and building height before we suggest a Louisville extension model, so the rail and length suit your site.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Fiberglass FE3200 and the Aluminum Louisville Extension Series

The Louisville FE3200 is the fiberglass choice, rated Type IA for 300 pounds in 16 to 40 foot lengths. Louisville fits it with a steel swivel safety shoe with a metal shield, a direct connection between rungs and rails, mar-resistant rail end caps and outside slide guides.

The aluminum family spans four duty ratings. The AE1200 and AE2200 are rated Type IA for 300 pounds, the AE3200 is Type I for 250 pounds, and the AE4200 is Type II for 225 pounds, which suits lighter use. The AE1660 is a single model, a 60 foot three-section ladder rated Type I for 250 pounds, for work far beyond a two-section ladder’s reach. Our Louisville aluminum extension ladders compare those five in detail.

Length follows the building. The FE3200, AE2200 and AE3200 run from 16 to 40 feet in 4 foot steps, and the AE4200 covers 16 to 40 feet with a gap at 36. If your work mixes both, one fiberglass FE3200 for electrical stops alongside lighter aluminum Louisville extension ladders for the rest is a sensible split.

We send our own trucks door to door across New England, which makes delivering a 40 foot ladder far simpler than hauling one home yourself.

Louisville AE1200 Series – Type IA Aluminum Extension Ladder

Rung Locks, Shoes and Working Length on a Louisville Extension Ladder

Several features recur across Louisville extension ladders. The MAXLOCK rung lock, made from a patented polymer, holds the fly section on its rung, and the patented QuickLatch system latches the fly and base sections together once the ladder is extended. D-shaped rungs give a flatter, serrated foothold, and swivel safety shoes work either with the tread down or turned to the spike position.

Overlap is where buyers get caught out. The sections have to overlap when extended, so Louisville lists a maximum extended length of 17 feet for its 20 foot models and 48 feet for the 60 foot AE1660. Louisville puts the maximum reach of a 20 foot ladder at 19 feet 10 inches, based on a 5 foot 7 inch person reaching 12 inches overhead.

OSHA counts the climber plus any tools or equipment against the duty rating, and it does not allow a ladder to be loaded past the maximum load it was built for. Type IA at 300 pounds is the common contractor choice, while the Type I and Type II models suit lighter loads.

Send us the eave height and the weight each climber carries, and we will quote Louisville extension ladders with the length and rating to match.

Louisville AE1660 – 60′ Extension Ladder

Setup Angle, Landing Height and Inspection for Louisville Extension Models

OSHA sets the core setup rules. When a ladder gives access to a roof or upper landing, the side rails must extend at least 3 feet beyond the landing, so add that 3 feet when you choose a length. The base belongs about one quarter of the working length out from the wall, roughly 4 feet out for every 16 feet up. Ladders with conductive rails cannot be used where the worker or ladder could contact exposed energized equipment.

Inspection and climbing habits matter just as much. Louisville’s C.L.I.M.B. Academy training calls for checking every rung, side rail, locking mechanism and foot before each use, and OSHA asks for periodic checks by a competent person. OSHA also limits ladders to stable, level surfaces unless they are secured, and it requires the climber to face the ladder going up and coming down. A ladder that fails inspection is tagged and taken out of service.

Louisville sells replacement rung lock kits, safety shoe kits and label kits, while advising against repairs beyond those kits. That same free course also covers selecting and setting up ladders. Stabilizers, V-bars and end cap covers fit many of these ladders and are covered in our Louisville ladder accessories.

Free in-person consultations at our Windham NH and Worcester MA showrooms let you see the rung locks and shoes on a Louisville extension ladder before buying.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Louisville Extension Ladders on a Multi-Brand Truck

Extension ladders often share a rack with stepladders, platforms and fall protection from other manufacturers, and comparing how each maker handles locks, shoes and ratings helps a fleet manager set one standard for the whole crew.

To see the other makers side by side, visit our ladder and truck equipment brands hub.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Quotes on Louisville Extension Ladders

Fiberglass FE3200 for electrical exposure, aluminum AE series for lighter carrying, and the AE1660 for 60 foot work cover most exterior jobs. Call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville extension ladders sized to your buildings. Browse our extension ladders store section, or go back to the Louisville Ladder brand overview.

Louisville Extension Ladders FAQs

Which Louisville extension ladders are safe near electricity?

The fiberglass FE3200. Louisville marks its aluminum AE series as unsafe around electricity, and OSHA bars conductive rails where a ladder could contact exposed energized equipment.

How high does a 20 foot Louisville extension ladder reach?

Louisville lists a maximum extended length of 17 feet, because the sections overlap, and a maximum reach of 19 feet 10 inches for an average adult.

What duty ratings do Louisville extension ladders come in?

We list Type IA at 300 pounds (FE3200, AE1200, AE2200), Type I at 250 pounds (AE3200, AE1660) and Type II at 225 pounds (AE4200).

What is the longest Louisville extension ladder you carry?

The AE1660, a 60 foot three-section aluminum ladder rated Type I for 250 pounds, with a maximum extended length of 48 feet.

How far should the base of a Louisville extension ladder sit from the wall?

OSHA calls for the base to sit about one quarter of the working length out, and the rails must extend at least 3 feet past an upper landing.

What does the QuickLatch system on Louisville extension ladders do?

Louisville designed QuickLatch to latch the fly and base sections together once the ladder is extended.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder