Louisville Step Ladders

Louisville Fiberglass Step Ladders, from the Metal Top FS1300HD to the FS1500 Tool Top and L-3016, 2 to 12 Feet

Single sided nonconductive stepladders in three series, compared on duty rating, top design, footing, weight and the sizes we list, with notes on fit for electrical, maintenance and home use.

Louisville fiberglass step ladders give electricians, maintenance crews and homeowners a nonconductive single sided ladder, and the choice between them turns on load rating and the top you want under your hands. Nation Wide Ladder carries three series, the Type IAA FS1300HD with its metal top, the Type IA FS1500 with a tool slot top and magnet, and the Type IA L-3016, and our team matches the size and rating to the work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Louisville Fiberglass Step Models Fit Best

Fiberglass rails are the reason these ladders exist. OSHA requires nonconductive side rails wherever a worker or the ladder could touch exposed energized equipment, and Louisville marks every model in this group as safe around electricity, so electricians, HVAC techs and facility staff working near panels and fixtures can use any of them.

These are single sided Louisville fiberglass step ladders, built to be climbed from the front only. That keeps them lighter than a twin front model, with Louisville listing the 6 foot FS1306HD at 22 pounds against 28 pounds for the twin front FM1406HD. If two people need to climb at once, or you want the leaning option of a Cross Step, those designs sit elsewhere in our wider Louisville stepladder range.

Height covers most indoor work, though fiberglass does add a little weight, since Louisville lists its 6 foot aluminum AS3006 at 17 pounds. Louisville gives a 6 foot model a 45 inch top standing height and a reach of about 10 feet 5 inches for an average adult, so the 8, 10 and 12 foot sizes take over for high ceilings, signage and racking.

Our team checks the height you need and what is overhead before you order, so the Louisville fiberglass step model you buy suits the job.

Louisville FS1300HD Series – Type IAA Fiberglass Step Ladder

FS1300HD, FS1500 and L-3016 Louisville Fiberglass Step Series Compared

All three series share nonconductive fiberglass rails, double riveted steps and a rating of 300 pounds or more, so the differences between these Louisville fiberglass ladders come down to the top, the footing and the size range.

The Louisville FS1300HD is the heavy duty fiberglass pick, rated Type IAA for 375 pounds. Louisville gives it a heavy gauge metal top, gusset bracing, double riveted steps and inside spreader braces, and we list it in 4, 6, 8, 10 and 12 foot sizes. The 6 foot FS1306HD weighs 22 pounds.

The Louisville FS1500 is rated Type IA for 300 pounds and swaps the metal cap for a molded top with tool slots and a hardware magnet. Louisville adds its SHOX impact absorption to protect the rails, RaptorBoot feet with a non-marring bonded tread, inside spreader braces and wide back braces. It has the widest spread of sizes, 2, 3, 4, 5, 6, 7, 8, 10 and 12 feet, and a 6 foot model weighs 20 pounds.

The Louisville L-3016 is also Type IA at 300 pounds, with a molded tool slot top, slip-resistant boots, gusset bracing and wide back braces, in 4, 6, 8, 10 and 12 feet.

Our Apprentice, Journeyman and Master ladder classes add a build-quality view, and we place the FS1500 in Journeyman and the L-3016 in Apprentice.

Louisville FS1500 Series – Type IA Fiberglass Step Ladder

Load Ratings, Setup and Care on a Louisville Fiberglass Step Ladder

The duty rating is the total the ladder is built to carry, and OSHA counts the climber plus any tools or equipment against it. A tradesperson with a full tool belt and a box of fittings can pass 300 pounds faster than expected, and that is the case for the Type IAA FS1300HD. OSHA does not allow a ladder to be loaded beyond the maximum load it was built for.

Setup follows a few firm rules. The metal spreader or locking device has to be fully engaged, the top cap and the tread just under it are never stood on, and the rear bracing on a single sided ladder is not for climbing. Louisville’s C.L.I.M.B. Academy training calls for checking every tread, side rail, locking mechanism and foot before each use, and any ladder that fails should be tagged and taken out of service.

Louisville sells replacement safety label kits and parts such as shoe kits for its step ladders, but it does not recommend repairing a damaged ladder beyond those kits, so a cracked fiberglass rail means retiring the ladder.

Our own trucks deliver door to door across New England, so a fleet of Louisville fiberglass step ladders reaches your yard together.

Louisville L-3016 Series – Type IA Fiberglass Step Ladder

Louisville Fiberglass Step Models Beside Other Ladder Makers

Most crews carry ladders from more than one manufacturer, and each brand settles the same questions about top design, footing and weight in its own way, which is worth seeing side by side before you standardize a fleet.

For that side-by-side view, open our ladder and truck equipment brands hub.

Quotes on Louisville Fiberglass Step Ladders

Pick the FS1300HD for the heaviest loads, the FS1500 for a tool top and the widest size range, or the L-3016 for lighter use, and add the universal pail shelf Louisville offers for its step ladders if you paint or patch from the top. Send us the sizes and quantities, and we will quote Louisville fiberglass step ladders for your crew. Browse every series on our Louisville store page, or start from our Louisville Ladder brand overview.

Louisville Fiberglass Step Ladders FAQs

Which Louisville fiberglass step ladder holds the most weight?

The FS1300HD, rated Type IAA for 375 pounds. The FS1500 and L-3016 are both Type IA, rated for 300 pounds.

Are Louisville fiberglass step ladders safe for electrical work?

Louisville marks all three series as safe around electricity, and OSHA requires nonconductive side rails where a ladder could contact exposed energized equipment.

What sizes does the Louisville FS1500 come in?

We list the FS1500 in 2, 3, 4, 5, 6, 7, 8, 10 and 12 foot sizes.

How much does a 6 foot Louisville fiberglass step ladder weigh?

Louisville lists the 6 foot FS1306HD at 22 pounds and the 6 foot FS1506 and L-3016-06 at 20 pounds each.

What is the difference between the FS1500 and the L-3016?

Both are Type IA at 300 pounds. The FS1500 adds a tool top with a hardware magnet, SHOX impact absorption and RaptorBoot feet, and we class it as Journeyman, while the L-3016 sits in our Apprentice class.

Can I stand on the top of a Louisville fiberglass step ladder?

No. OSHA does not allow the top cap or top step of a stepladder to be used as a step, so choose a taller size instead.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder