Louisville Step Ladders
Louisville Twin Step Ladders for Two Climbers, in the Type IAA FM1400HD and Type IA FM1500, from 3 to 16 Feet
Fiberglass twin front stepladders with steps on both sides, compared on load rating, hinge and brace construction, footing, weight and height, plus the OSHA rule that makes the rear section climbable.
Louisville twin step ladders put climbing steps on both sides of the frame, so two people can work from one ladder on jobs that are awkward for a single person. Nation Wide Ladder carries two fiberglass twin front series from Louisville, the Type IAA FM1400HD and the Type IA FM1500, and our team helps you choose the rating and height before you order.

- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Crews Choose a Louisville Twin Step Design
On a standard stepladder only the front section has steps, and OSHA forbids climbing the rear cross bracing. A twin front ladder changes that by building steps into both sections, which is exactly the case OSHA allows for climbing from either side. Louisville describes its twin step models as ladders that let two users work at the same time, so a two-person task such as holding a long piece while a partner fastens it can happen from one ladder.
The second benefit is less obvious. With steps on both faces, one person can climb from whichever side faces the work without walking the ladder around, which helps in tight mechanical rooms and between shelving.
Both Louisville twin step series use fiberglass rails, and Louisville marks them as safe around electricity. That suits electricians and maintenance crews, since OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment. The tradeoff is weight. A 6 foot twin FM1406HD weighs 28 pounds against 22 pounds for the single sided FS1306HD, so these ladders earn their place where two climbers or two working sides matter.
Our team looks at the job with you and confirms whether a twin step model or a single sided one in our Louisville step ladder lineup fits better.
FM1400HD and FM1500 Louisville Twin Step Series Compared
The Louisville FM1400HD is the heavy duty twin, rated Type IAA for 375 pounds. Louisville builds it with heavy gauge steel hinges, heavy duty gusset bracing, inside spreader braces and riveted steps, and adds its SHOX impact absorption system and RaptorBoot feet with a non-marring bonded tread. We list it in 4, 5, 6, 7, 8, 10, 12, 14 and 16 foot sizes, which makes it the tallest twin step option in our Louisville range.
The Louisville FM1500 is rated Type IA for 300 pounds. It shares the steel hinges, inside spreader braces, SHOX system and RaptorBoot feet, with double riveted step construction, and we list it from a compact 3 foot model up through 4, 5, 6, 7, 8, 10 and 12 feet. A 6 foot FM1506 weighs 26 pounds, two less than its heavy duty sibling.
The choice usually comes down to load and height. Crews carrying heavy tools and material, or anyone who needs 14 or 16 feet, should start with the FM1400HD. Lighter work at 12 feet and under suits the FM1500. For either series, Louisville sells replacement safety label kits and shoe kits, which keep the warnings legible and the feet sound on a ladder in daily use.
We send our own trucks door to door across New England, so a mixed order of twin step sizes arrives in one delivery.
Load Ratings, Reach and Daily Checks for Louisville Twin Step Models
Louisville publishes one load capacity for each twin model, 375 pounds for the FM1400HD and 300 pounds for the FM1500, and OSHA counts each climber plus any tools or equipment against that figure. OSHA does not allow a ladder to be loaded past the maximum load it was built for, so when two people share a ladder, add up both of them and their gear and ask us how the rating applies before you set a crew rule.
Reach follows height. Louisville lists a 45 inch top standing height on the 6 foot FM1406HD and a maximum reach of 10 feet 5 inches for an average adult, and the taller sizes scale from there. The top cap and the tread under it are never stood on, so pick the next size up instead.
Inspection covers both sides. Louisville’s C.L.I.M.B. Academy training calls for checking every tread, side rail, locking mechanism and foot before each use, and OSHA asks for periodic checks by a competent person. Any ladder that fails is tagged and pulled from service.
Send us a list of sizes and how many climbers each ladder will carry, and we will quote Louisville twin step ladders rated for the job.
Louisville Twin Step Models Among Other Ladder Brands
Two-person ladders are one specialized corner of a crew’s kit, and the rest of that kit, from extension ladders to platforms, often comes from several manufacturers, each with its own approach to hinges, footing and rating.
You can line those makers up in our ladder and truck equipment brands hub.
Ordering Louisville Twin Step Ladders
The FM1400HD covers heavy loads up to 16 feet and the FM1500 covers lighter work up to 12 feet, both in fiberglass for electrical jobs and both with steps on each side for a second climber. Call 603-434-6911 in NH or 508-754-3030 in MA to price Louisville twin step ladders for your crew, see them on our Louisville store page, or start from the Louisville Ladder brand page.
Louisville Twin Step Ladders FAQs
What is a Louisville twin step ladder?
A fiberglass stepladder with climbing steps on both the front and rear sections, which Louisville designs so two users can work on the same ladder at once.
Which Louisville twin step model holds more weight?
The FM1400HD, rated Type IAA for 375 pounds. The FM1500 is rated Type IA for 300 pounds.
How tall do Louisville twin step ladders go?
We list the FM1400HD up to 16 feet and the FM1500 up to 12 feet. The smallest twin model we carry is the 3 foot FM1503.
Can I climb the back of a twin step ladder?
Yes. OSHA bars climbing the rear cross bracing of a stepladder unless steps are provided on both sections, and a twin front ladder has them.
Are Louisville twin step ladders safe around electricity?
Both series use fiberglass rails, and Louisville marks them as safe around electricity.
How heavy is a 6 foot Louisville twin step ladder?
Louisville lists the FM1406HD at 28 pounds and the FM1506 at 26 pounds.
Need help choosing the right Louisville Ladder equipment?
Talk to the team or send us your list and we will put a quote together.


