Louisville Ladder range
Louisville Specialty Ladders, from Pinnacle Pro Platform and Cross Pinnacle Leaning Platform Models to the Tripod
Fiberglass platform, leaning platform and three-legged tripod ladders for long standing work, corners, poles and uneven ground, compared on rating, platform size, handrail height and weight.
Louisville specialty ladders fill the gaps a standard stepladder leaves, such as standing for hours at height, leaning into a corner or against a pole, and setting up on ground that is not level. Nation Wide Ladder carries three fiberglass series for that work, the FXP1700 Pinnacle Pro platform ladder, the FCP1400 Cross Pinnacle leaning platform ladder and the FT1500 tripod, and our team helps you pick the one your job calls for.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
When a Louisville Specialty Ladder Beats a Standard Stepladder
A stepladder works until the job asks for something it cannot do, which is where specialty ladders come in. OSHA rules out standing on the top or top step of a stepladder, while Louisville describes a platform ladder as one with a standing platform at its highest level, surrounded on three sides by a handrail. A broad platform with a handrail lets an electrician, installer or maintenance tech face the work and stay there, instead of balancing on a narrow tread.
Other jobs need a different shape. A ladder that leans into a corner or against a pole reaches places a self-supporting ladder cannot get close to, and a three-legged tripod sets up where four feet would rock on uneven ground or where space is tight.
All three Louisville specialty series we list use fiberglass rails, and Louisville marks each one as safe around electricity. That matters because OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment, so these specialty models can work in electrical rooms as well as on building sites and grounds.
Our team asks how long you will stand at height and what the ground looks like before suggesting one of these Louisville specialty models.
FXP1700 and FCP1400 Louisville Specialty Platform Models
The Louisville FXP1700 Pinnacle Pro is a platform ladder rated Type IA for 300 pounds, in 2, 3, 4, 6, 8, 10 and 12 foot sizes. Louisville gives it a 30 inch handrail that sits at tool belt height, a platform area Louisville describes as 30 percent larger, room to work facing more than one direction, and a ProTop with tool slots and a magnet. A 6 foot FXP1706 weighs 31 pounds.
The Louisville FCP1400 Cross Pinnacle adds a second mode. Rated Type IAA for 375 pounds, it stands as a platform ladder and converts to lean against a wall, a pole or into a corner on its V-shaped ProTop, which also carries a magnet tray, hardware tray, drill and tool slots, a pipe or 2Ă—4 holder and two tool tether points. Louisville calls it the first ladder of its kind and finishes the top and shoes in HiVis green. We list it in 3, 4, 6 and 8 feet, and the 6 foot FCP1406HD weighs 43 pounds.
Louisville sells the LP-2807-80 Pinnacle gate for both platform designs, which closes in all four sides of the platform.
Free in-person consultations at our Windham NH and Worcester MA showrooms let your crew stand on each specialty platform before choosing.
The FT1500 Louisville Specialty Tripod for Uneven Ground
The Louisville FT1500 tripod takes a different approach. Rated Type IA for 300 pounds, it stands on three legs, which Louisville says gives it more stability on uneven ground and makes it suited to limited access areas. We list it in 6, 8 and 10 foot sizes.
Louisville builds the FT1500 with larger than average steps for more foot surface, a center-pull spreader brace, steel reinforced outrigger rail brackets, heavy duty gusset bracing and double riveted steps. A 6 foot FT1506 weighs 21 pounds and opens to about 36 inches wide, with the same 45 inch top standing height and 10 foot 5 inch maximum reach Louisville gives its 6 foot stepladders.
Louisville counts its tripod designs among the products it is known for, alongside the Cross Step. Among Louisville specialty ladders, the tripod is the one to pick when the ground, rather than the height, is the problem. It still follows stepladder rules, so the spreader must be locked and the top is not a step.
Our own trucks deliver door to door across New England, so a tripod or platform ladder reaches your site ready to work.
Ratings, Setup and Upkeep for Louisville Specialty Ladders
The rating is the ceiling for everything on the ladder. Louisville lists 375 pounds on the FCP1400 and 300 pounds on the FXP1700 and FT1500, and OSHA’s ladder guidance counts the climber plus any tools or equipment against that figure. With tool trays and tether points close at hand, it is easy to add weight without noticing.
Each design has its own setup check. Lock the spreaders fully on the platform and tripod models, and on the Cross Pinnacle latch the rear section before leaning it. OSHA wants ladders used only for the purpose they were designed for, so a tripod is never leaned and the Cross Pinnacle is only leaned with its rear section latched.
Louisville’s C.L.I.M.B. Academy training calls for checking every tread, side rail, locking mechanism and foot before each use, and a failed ladder is tagged and removed from service. Louisville sells replacement label kits for its platform models, and the same free course also covers selecting and setting up ladders.
Send us a list with heights and trades, and we will quote Louisville specialty ladders that suit each crew.
Louisville Specialty Ladders Beside Other Brands
Specialty platform, leaning and tripod ladders are built very differently from one maker to the next, so a crew that relies on them often compares several brands before settling on one design for its trucks.
You can do that comparison in our ladder and truck equipment brands hub.
Ordering Louisville Specialty Ladders
The FXP1700 covers long standing work, the FCP1400 adds a leaning mode at Type IAA, and the FT1500 handles uneven ground. Call 603-434-6911 in NH or 508-754-3030 in MA to price Louisville specialty ladders for your jobs. Browse our specialty ladders store section, or go back to our Louisville Ladder overview.
Louisville Specialty Ladders FAQs
What Louisville specialty ladders do you carry?
Three fiberglass series, the FXP1700 Pinnacle Pro platform ladder, the FCP1400 Cross Pinnacle leaning platform ladder and the FT1500 tripod.
Which Louisville specialty ladder can lean against a pole?
The FCP1400 Cross Pinnacle. It converts from a platform ladder to a leaning ladder, and its V-shaped ProTop rests against walls, poles and corners.
Why choose a Louisville specialty tripod?
Louisville says the three-legged FT1500 gives more stability on uneven ground and suits limited access areas.
How tall is the handrail on the Louisville Pinnacle Pro?
Louisville gives the FXP1700 a 30 inch handrail, which it describes as tool belt height.
Are Louisville specialty ladders safe around electricity?
All three series we list are fiberglass, and Louisville marks them as safe around electricity.
What load ratings do these Louisville specialty ladders carry?
The FCP1400 is Type IAA at 375 pounds. The FXP1700 and FT1500 are Type IA at 300 pounds.
Need help choosing the right Louisville Ladder equipment?
Talk to the team or send us your list and we will put a quote together.








