Louisville Step Ladders
Louisville 5 ft Step Ladders in Twin Front FM1405HD and FM1505 and Single-Sided FS1505 Fiberglass and More
The in-between height for kitchens, closets and mid-height fixtures, with twin front models for two workers, the FS1505 tool top, Type IAA and IA ratings and reach against the 4 and 6 foot sizes.
Louisville 5 ft step ladders fill the gap between a compact 4 foot model and a full 6 foot ladder, which suits kitchens, closets, shelving and fixtures that sit just out of reach. Nation Wide Ladder quotes three Louisville series at 5 ft, the FM1405HD and FM1505 twin front models and the single-sided FS1505, all in fiberglass, and our team helps you choose between one climber and two.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why the Louisville 5 ft Size Sits Between 4 and 6
Louisville lists a maximum reach of 9 feet 5 inches for the FS1505, based on a 5 foot 7 inch person reaching 12 inches overhead. For comparison it gives the FS1504 8 feet 6 inches and the FS1506 10 feet 5 inches, so the 5 ft size lands between them for work where one size feels short and the next feels tall.
That middle height also shapes handling. A 5 ft ladder clears most doorways and fits in a closet or a van more easily than a 6 foot model, while still putting a ceiling fixture or upper cabinet within reach. OSHA rules out the top and top cap of a stepladder as a place to stand, so choose by the reach figure rather than by the label. Our 5 ft step ladders from every brand we carry show where Louisville fits beside Werner at this height.
The 5 foot step ladder also suits homeowners who find a 6 foot model awkward to store, and trades who work under cabinets and soffits where a taller ladder gets in the way.
Within the Louisville 5 ft step ladders we list, all three share fiberglass rails, so the choice turns on one climber or two and on the load rating.
At our Windham NH and Worcester MA showrooms you can stand on a 5 ft and a 6 foot model side by side before deciding.
Louisville 5 ft Twin Front Models for Two Workers
Two of the three 5 ft models are twin front ladders, with steps on both sides so two people can climb at once. That suits jobs where one person holds a fixture or panel while the other fastens it. The Louisville FM1405HD is rated Type IAA for 375 pounds, and the Louisville FM1505 is rated Type IA for 300 pounds.
Our store describes both series as metal top fiberglass ladders with non-marring slip-resistant feet, heavy gauge steel hinges, gusset bracing, double riveted construction and inside spreader braces. Louisville marks its fiberglass models as safe around electricity, and OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment, so either twin front model suits electrical work. OSHA also requires a metal spreader or locking device to hold a stepladder open, and it does not allow climbing on the rear bracing unless steps are built into both sides, which a twin front ladder provides.
Either side of a twin front ladder can be climbed, so a 5 foot step ladder of this kind can stay put while the climber changes sides around a fixture.
For a crew that works in pairs, one twin front step ladder can do the job of two single-sided ones.
Saturday morning hours at both showrooms give a two-person crew time to try a twin front model together.
The Single-Sided Louisville FS1505 at 5 ft
The Louisville FS1505 is the one-climber choice at this height. Louisville rates it Type IA for 300 pounds and fits a top with a magnet and multiple tool slots, SHOX impact absorption to protect the rails, Raptor boots with a non-marring bonded tread, inside spreader braces, wide back braces and double riveted steps. Louisville also lists a pail shelf and a replacement top kit for it.
Our store places the FS1500 series in our Journeyman tier, a class we point to homeowners and smaller contractors. OSHA counts the climber plus all tools and materials against the 300 pound rating, so a heavier load points to the Type IAA FM1405HD instead. The Louisville stepladder category covers the FS1500 in its other sizes.
Compared with the twin front models, the FS1505 gives one climber a top that keeps screws, bits and small tools within reach, which suits punch-list and maintenance work where the step ladder moves often.
Its rear section carries wide back braces rather than climbing steps, so this step ladder is climbed from the front only, as OSHA expects.
Our team helps you select between the FS1505 and the twin front models by asking how many people work from the ladder and what they carry.
Louisville 5 ft Ladders Alongside Other Makers
A mid-height ladder usually joins taller stepladders and an extension ladder in a crew kit, and those often come from different manufacturers with different tops and ratings.
Should you want to see those makers beside Louisville, head to our ladder and truck equipment brands hub.
Quotes on Louisville 5 ft Step Ladders
Two twin front ratings and a single-sided tool top model cover the in-between height well. Call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville 5 ft step ladders for your crew, with the complete Louisville selection in our store and our Louisville brand overview to browse.
Louisville 5 Ft Step Ladders FAQs
How high can I reach on a Louisville 5 ft stepladder?
Louisville lists a maximum reach of 9 feet 5 inches for the FS1505, based on a 5 foot 7 inch person reaching 12 inches overhead.
Which Louisville 5 ft models let two people climb?
The FM1405HD and FM1505 twin front models, which have steps on both sides.
What ratings do the Louisville 5 ft models carry?
The FM1405HD is Type IAA for 375 pounds, while the FM1505 and FS1505 are Type IA for 300 pounds.
Are Louisville 5 ft step ladders fiberglass?
Yes. All three 5 ft models we list are fiberglass, which Louisville marks as safe around electricity.
What accessories fit the Louisville FS1505?
Louisville lists a pail shelf and a replacement top kit for the FS1505.
Need help choosing the right Louisville Ladder equipment?
Talk to the team or send us your list and we will put a quote together.






