Louisville Ladder range

Louisville Single and Manhole Ladders, from Aluminum AE2100 and Fiberglass FE3100 Straight Ladders to the FE8900 Manhole

One-section straight ladders in aluminum and fiberglass plus a narrow fiberglass manhole ladder, compared on duty rating, rails, shoes, weight and length, with setup rules for walls, landings and vaults.

Louisville single and manhole ladders cover the jobs where a fixed length is all you need, from a straight ladder against a wall or loading dock to a narrow ladder lowered into a vault or utility manhole. Nation Wide Ladder carries the aluminum AE2100 and fiberglass FE3100 single ladders and the fiberglass FE8900 manhole ladder, and our team helps you choose the material, rating and length for each site.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Where Louisville Single Ladders and Manhole Models Fit

A single ladder, often called a straight ladder, is one section of rails and rungs with no fly to extend. It does not support itself, so it leans against a wall, a structure or the edge of an opening. With no overlap and no rung locks, it is simple to inspect and quick to set, which suits loading docks, mezzanines, scaffold access and other places where the same height comes up again and again.

A manhole ladder is a specialized single ladder. Louisville designs its FE8900 with a narrow width for working in manholes, rail protection where the ladder rests on the rim, and boots that grip from either side, so utility, telecom and municipal crews can climb in and out of vaults and access holes.

Material decides where each ladder can go. Louisville marks the aluminum AE2100 as unsafe around electricity and both fiberglass models as safe, and OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment.

Our team asks where each Louisville single or manhole ladder will be used and what is nearby before we quote, so the rails suit the site.

Louisville AE2100 Series – Type IA Aluminum Single Ladder

Aluminum AE2100 Versus Fiberglass FE3100 Louisville Single Models

The Louisville AE2100 is an aluminum single ladder rated Type IA for 300 pounds. Louisville builds it with a full I-beam rail, D-shaped rungs, mar-resistant rail end caps and swivel safety shoes, and we list it in 8, 10, 12, 14, 16, 18 and 20 foot lengths. The 16 foot AE2116 weighs 33 pounds.

The Louisville FE3100 is the fiberglass version, also Type IA for 300 pounds. Louisville gives it a direct connection between rungs and rails for rigidity, D-shaped rungs, mar-resistant end caps and steel swivel safety shoes with a metal shield. We list it in 8, 10, 12 and 16 feet, and the 16 foot FE3116 weighs 36 pounds, only 3 more than the aluminum single at the same length.

Louisville lists its aluminum stabilizer, Pro-Guards covers and LEVELOK leveler as accessories for the FE3100, and puts the maximum reach of a 16 foot single ladder at 18 feet 10 inches for a 5 foot 7 inch person reaching 12 inches overhead. With no sections to overlap, Louisville lists the full 16 feet as the maximum extended length.

The AE2100 reaches 20 feet and saves a little weight, while the FE3100 is the single ladder to choose near anything electrical.

We place regular weekly deliveries to Maine from New Hampshire, so long single ladders reach Maine crews on a set schedule.

Louisville FE3100 Series – Type IA Fiberglass Single Ladder

Inside the FE8900 Louisville Manhole Ladder Design

The Louisville FE8900 is rated Type IAA for 375 pounds, the highest rating in this group, and we list it in 8, 10, 12, 14 and 16 foot lengths, each carrying the same Type IAA rating from the FE8908 to the FE8916. It is fiberglass, which Louisville marks as safe around electricity, and about 14 inches wide, a narrow width Louisville chose for work inside manholes.

The details are built around the manhole rim. Louisville fits 3 foot plastic rail protectors on both sides so the rails are not damaged where they rest on the edge, and heavy duty gussets under the steps. Its heavy duty boots turn through 180 degrees so the ladder works from either side, with a thick non-marring thermoplastic tread bonded and mechanically fastened to a polypropylene upper boot.

A 10 foot FE8910 weighs 21 pounds and gives a maximum reach of 13 feet, and Louisville states that the series meets or exceeds ANSI and OSHA safety standards.

Our two showrooms, in Windham NH and Worcester MA, let your utility crew handle a Louisville manhole ladder before ordering a set.

Louisville FE8900 Series – Type IAA Fiberglass Manhole Ladder

Setup and Inspection for Louisville Single and Manhole Ladders

OSHA’s rules for non-self-supporting ladders apply to both types. Set the base about one quarter of the working length away from the support, and when the ladder gives access to a landing or roof, extend the rails at least 3 feet past it. OSHA also limits ladders to stable, level surfaces unless they are secured, and a ladder set in a doorway, passageway or driveway has to be secured or barricaded from traffic.

The load rating counts the climber plus any tools or equipment, and OSHA does not allow a ladder to be loaded past its rated maximum. At a manhole, count everything you carry down the ladder with you.

Louisville’s C.L.I.M.B. Academy training calls for checking every rung, side rail, locking mechanism and foot before each use, and OSHA wants periodic checks by a competent person. A ladder that fails is tagged and removed from service. Louisville sells replacement label kits for models such as the AE2100 but does not recommend repairs beyond its kits, so a cracked rail retires the ladder.

Call 603-434-6911 in NH or 508-754-3030 in MA with your lengths and quantities, and we will quote Louisville single and manhole ladders to suit.

Louisville Single and Manhole Models Next to Other Makers

Straight and manhole ladders are a small part of most fleets, but they still need to match the rating and material standards a crew sets for its extension and step ladders, which often come from other manufacturers.

Set those standards with help from our ladder and truck equipment brands hub.

Quotes on Louisville Single and Manhole Ladders

The AE2100 covers aluminum straight ladder work to 20 feet, the FE3100 adds fiberglass for electrical areas, and the FE8900 handles manholes at Type IAA. Our own trucks deliver across New England, and we ship anywhere in the US, so tell us what you need and we will quote Louisville single and manhole ladders to match. Browse our single and manhole ladders store section, or go back to the Louisville Ladder brand overview.

Louisville Single and Manhole Ladders FAQs

What is the difference between Louisville single and manhole ladders?

A single ladder is a one-section straight ladder for walls and landings. The FE8900 manhole ladder is a narrow fiberglass single ladder with rail protectors for the manhole rim and boots that work from either side.

Which Louisville single ladder is safe near electricity?

The fiberglass FE3100. Louisville marks the aluminum AE2100 as unsafe around electricity.

What load rating does the Louisville FE8900 manhole ladder have?

Type IAA, rated for 375 pounds, in 8 to 16 foot lengths.

How long are Louisville single ladders?

We list the AE2100 from 8 to 20 feet and the FE3100 in 8, 10, 12 and 16 feet.

How wide is the Louisville manhole ladder?

About 14 inches, a narrow design Louisville built for working in manholes.

How much does a Louisville single ladder weigh?

Louisville lists the 16 foot aluminum AE2116 at 33 pounds and the 16 foot fiberglass FE3116 at 36 pounds.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder