Louisville Step Ladders
Louisville 6 ft Step Ladders With Metal, ProTop and V-Shaped Tops, Cross-Step, Platform and Twin Designs and More
The everyday ceiling-height ladder, compared by what sits on top, how the Cross-Step, Cross Pinnacle and Pinnacle Pro change the reach, and the 45 inch standing height of a standard model.
Louisville 6 ft step ladders are the size most crews and homeowners use for ceilings, light fixtures and painting, and with eleven series at this height the top of the ladder is a practical way to tell them apart. Nation Wide Ladder quotes the FS1306HD, FM1406HD, FM1506, FS1506, L-3016-06, AS3006 and AS2106 stepladders, the FXS1406HD and FXS1506 Cross-Step models, the FCP1406 Cross Pinnacle and the FXP1706 Pinnacle Pro platform, and we match the design to the work.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Choosing a Top on a Louisville 6 ft Stepladder
Metal tops suit heavy daily use. The Louisville FS1306HD has a heavy gauge metal top and a Type IAA rating of 375 pounds, and the FM1406HD and FM1506 twin front models also carry metal tops.
Tool tops suit trades who want hardware close. The FS1506 uses a top with a magnet and multiple tool slots, the L-3016-06 has a molded top with tool slots, and the aluminum AS3006 and AS2106 pair a ProTop with a molded pail shelf for painters. The Louisville FXS1500 Cross-Step and FXS1406HD carry a V-shaped ProTop with a magnet tray, drill and tool slots and a pipe or 2×4 holder, which also lets the ladder lean against a wall, pole or corner. Louisville finishes those tops in HiVis green so they stand out on site. Whatever the top, OSHA does not allow the top or top cap of a stepladder to be used as a working surface.
On a 6 foot step ladder that does many jobs, a tool top saves trips down, a metal top suits heavy daily use where the top takes knocks, and painters often prefer the pail shelf on the aluminum models.
Among Louisville 6 ft step ladders, the top is the part you handle most, so it is worth choosing deliberately.
Our team helps you select a top by asking what you carry up the ladder and how often you set it up each day.
Louisville 6 ft Cross-Step, Cross Pinnacle and Platform Designs
Three designs change how the 6 ft size works. The FXS1406HD and FXS1506 Cross-Step models convert from a stepladder to a leaning ladder, rated Type IAA for 375 pounds and Type IA for 300 pounds. The Louisville FCP1406 Cross Pinnacle combines a platform with the same leaning top, rated Type IAA, with tool tether anchor points and a lock latch for the rear section. The Louisville FXP1706 Pinnacle Pro is a Type IA platform with a 30 inch handrail at tool belt height.
The difference shows in the numbers. Louisville lists a maximum reach of 10 feet 5 inches for the standard 6 ft models and the Cross-Step, and 12 feet 3 inches for the FCP1406 and FXP1706. Maximum standing height is 45 inches on a standard 6 ft model, 5 feet 8 inches on the FXP1706 and 68 inches on the FCP1406. Our 6 ft step ladders from both brands compare these with Werner at the same size.
These designs take more floor space than a standard 6 foot step ladder. Louisville lists an open depth of 56.38 inches for the FXP1706 against 40.5 inches for the FS1506, so they suit long tasks in open rooms more than quick jobs in tight corners.
A Cross-Step at 6 feet doubles as a short leaning ladder, while a standard step ladder stays the quicker choice for open floors.
Free consultations at our Windham NH and Worcester MA showrooms let you set up a Cross-Step and a platform side by side.
Weight and Rail Material Across Louisville 6 ft Models
Louisville lists the AS2106 at 15 pounds, the AS3006 at 17, the FS1506 and L-3016-06 at 20, the FXS1506 at 21, the FS1306HD at 22, the FXS1406HD at 23, the FM1506 at 26, the FM1406HD at 28, the FXP1706 at 31 and the FCP1406 at 43. Lighter models move between rooms faster, while the platforms trade weight for a deck and a rail.
Rail material is the other split, and a fiberglass step ladder weighs a few pounds more than aluminum at 6 feet in exchange for a nonconductive rail. Louisville marks the fiberglass models as safe around electricity and the aluminum AS3006 and AS2106 as not safe, and OSHA requires nonconductive side rails wherever a ladder could contact exposed energized equipment. Ratings run from Type IAA at 375 pounds to Type I at 250 pounds on the AS2106, and OSHA counts the climber plus every tool against them. The Louisville stepladder lineup runs these series from 2 to 16 feet.
For a fleet standard, a fiberglass 6 foot step ladder between 20 and 23 pounds, such as the FS1506, FXS1506, FS1306HD or FXS1406HD, balances weight against a Type IA or IAA rating.
The lightest step ladder at this size is the aluminum AS2106, and the heaviest is the FCP1406 platform.
Over 50 years of supplying contractors and homeowners has shown us that the 6 ft size is where most fleets standardize, so we quote mixed orders often.
Louisville 6 ft Ladders in a Crew of Mixed Makes
Because the 6 ft size is so common, many crews own several makes of 6 foot step ladder, and comparing tops and ratings across makers helps when replacing older ladders with one standard.
To set Louisville against the other makers we stock, open our ladder and truck equipment brands hub.
Quotes on Louisville 6 ft Step Ladders
Metal, tool and V-shaped tops, platforms and leaning designs give the everyday 6 ft size more variety than any other. Send us your tasks and crew, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville 6 ft step ladders to match, with the full Louisville catalog in our store and our Louisville ladders page on hand.
Louisville 6 Ft Step Ladders FAQs
How high can I reach on a Louisville 6 ft stepladder?
Louisville lists 10 feet 5 inches for its standard 6 ft models and 12 feet 3 inches for the FCP1406 and FXP1706 platforms, each based on a 5 foot 7 inch person reaching 12 inches overhead.
What is the standing height on a Louisville 6 ft model?
Louisville lists a maximum standing height of 45 inches on a standard 6 ft stepladder, 5 feet 8 inches on the FXP1706 and 68 inches on the FCP1406.
Which Louisville 6 ft ladders have a pail shelf?
The aluminum AS3006 and AS2106 come with a molded pail shelf.
What is the lightest Louisville 6 ft model?
Louisville lists the AS2106 aluminum model at 15 pounds.
Which Louisville 6 ft models can lean against a wall?
The FXS1406HD and FXS1506 Cross-Step models and the FCP1406 Cross Pinnacle have a V-shaped top that leans against walls, poles and corners.
Which 6 ft Louisville stepladders have a metal top?
The FS1306HD and the FM1406HD and FM1506 twin front models.
Need help choosing the right Louisville Ladder equipment?
Talk to the team or send us your list and we will put a quote together.










