Louisville Extension Ladders

Louisville 28 ft Extension Ladders, With Rack and Transport Sizes for Fiberglass and Aluminum Models and More

Closed lengths near 173 inches, ladder rack fit, 25 foot extended length for tall two-storey eaves, the FE3228 for wiring and the AE2228, AE3228 and AE4228 aluminum weights.

Louisville 28 ft extension ladders reach tall two-storey eaves and gable ends, but at this length the ladder has to fit a truck rack and a crew before it ever reaches the wall. Nation Wide Ladder quotes the fiberglass FE3228 and the aluminum AE2228, AE3228 and AE4228, and we look at transport, rating and reach together for every 28 ft order.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Closed Length and Rack Fit for a Louisville 28 ft Ladder

A 28 ft ladder closes to its two 14 foot sections. Louisville lists the closed length at 173.5 inches for the Louisville FE3228 fiberglass model, 172.875 inches for the AE2228 and 172 inches for the AE3228. Measure the rack, the bed and any overhang rules on your route against those figures, because a ladder that rides badly gets damaged long before it wears out.

Weight follows the rail. Louisville lists the FE3228 at 58 pounds, the AE2228 at 55, the AE3228 at 53 and the AE4228 at 48, so loading a fiberglass 28 ft model onto a roof rack is a two-person lift on many crews. Pro-Guards covers appear on Louisville accessory lists for every 28 ft series and help protect the rails in transit. Louisville also lists the Ladder Lash and a side mounted double pulley system for the FE3228.

Plan the vehicle and the ladder together, because a rack has to support the full closed length of a 28 foot extension ladder, and a short rack leaves the ends hanging where they can be struck.

We install ladder racks on trucks and vans as well as selling them, so the rack can be sized to a Louisville 28 ft ladder in a single visit.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Fiberglass or Aluminum Rails on Louisville 28 ft Extension Models

Rail material decides who can use the ladder. The FE3228 is the one 28 ft model Louisville marks as safe around electricity, and OSHA requires nonconductive side rails anywhere the climber or ladder could contact exposed energized equipment. It is rated Type IA for 300 pounds, with a steel swivel safety shoe, a metal shield and a direct rung-to-rail connection.

The aluminum models step down by rating. The Louisville AE2228 keeps Type IA at 300 pounds on a full I-beam rail. The Louisville AE3228 is Type I at 250 pounds on a modified I-beam with a rope and pulley, and the AE4228 is Type II at 225 pounds. OSHA counts the climber plus all tools and materials against those ratings. Each series uses the QuickLatch, and the FE3228, AE2228 and AE3228 add the MAXLOCK polymer rung lock, with D-shaped serrated rungs throughout.

Homeowners who climb a few times a year often find the 225 pound AE4228 enough, and at 48 pounds it is the easiest 28 foot extension model to raise, while contractors carrying shingles or tools are better served by Type IA.

Comparing Louisville 28 ft extension ladders side by side, the rail decides who may climb near wiring and the rating decides how much each climber may carry.

Our team checks the rating against the climber and the tools on every quote, so the rail and the load suit each person on the crew.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Extended Length and Setup at 28 ft

Louisville lists a maximum reach of 27 feet 7 inches for each 28 ft model, figured for a 5 foot 7 inch person reaching 12 inches overhead, and a maximum extended length of 25 feet after the sections overlap. Set the 25 foot figure against the eave or gable you plan to reach, and remember that OSHA wants the rails at least 3 feet above any landing they serve.

Footing matters more as the ladder lengthens. OSHA places the base about one quarter of the working length out from the wall, and it limits ladders to stable, level ground unless they are secured. Louisville lists the LevelOK stabilizer and leveler for every 28 ft series and the E34 automatic leveler for the FE3228 and AE2228. Our 28 ft extension ladders across both brands show how Louisville and Werner compare here, and the Louisville extension category covers the shorter and longer sizes.

Louisville lists a 14 foot section length for each 28 foot model, so the fly travels a long way as it rises. Pull it up steadily with the rope where one is fitted, and let the QuickLatch engage before anyone climbs.

Regular weekly deliveries run from New Hampshire into Maine, which helps crews there take a 28 ft ladder without a long trip to collect it.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Louisville 28 ft Ladders With Racks and Gear From Other Makers

At 28 ft the ladder, the rack and the fall protection for the roof edge are bought as one system, and they often come from different manufacturers. Matching them early saves refitting later.

For the racks and safety gear we carry from other makers, look through our ladder and truck equipment brands hub.

Louisville AE4200 Series – Type II Aluminum Extension Ladder

Getting a Quote on Louisville 28 ft Extension Ladders

Closed lengths near 173 inches, weights from 48 to 58 pounds and a 25 foot extended length make transport and rating the first questions at this size. Send your vehicle and building details or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Louisville 28 ft extension ladders to fit, with the whole Louisville catalog in our store and our guide to Louisville ladders on hand.

Louisville 28 Ft Extension Ladders FAQs

How long is a Louisville 28 ft extension ladder when closed?

Louisville lists closed lengths of 173.5 inches for the FE3228, 172.875 inches for the AE2228 and 172 inches for the AE3228.

What does a Louisville 28 ft ladder weigh?

Louisville lists 58 pounds for the FE3228, 55 for the AE2228, 53 for the AE3228 and 48 for the AE4228.

What is the extended length of a 28 ft Louisville model?

Louisville gives a maximum extended length of 25 feet and a maximum reach of 27 feet 7 inches.

Can you fit a rack for a Louisville 28 ft extension ladder?

Yes. We install truck and van racks, so we can size one to the closed length of the ladder you choose.

Which Louisville 28 ft ladders take the E34 auto leveler?

Louisville lists the E34 automatic adjusting leveler for the FE3228 and AE2228.

Need help choosing the right Louisville Ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder