Buying help

Ladders by Height, From 2 ft Step Ladders to 40 ft Extension Ladders in Werner and Louisville Builds and More

Reach charts and standing levels, extension sizes from 16 to 40 ft, step sizes from 2 to 12 ft, duty ratings from Type II to Type IAA, and Werner and Louisville compared at each size.

Choosing ladders by height starts with the job, and Nation Wide Ladder compares Werner and Louisville at every size we carry so you can match the ladder to the gutter, roof edge, ceiling or fixture you need to reach. We cover extension ladders from 16 to 40 ft and step ladders from 2 to 12 ft, including folding, twin, cross-step, podium and platform styles, with the reach, duty rating and weight each maker publishes.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Choosing Ladders by Height for the Work You Actually Do

The number on a ladder is its size, and the figure that matters on the job is the height you can safely work at. Werner and Louisville both publish reach figures for each size, based on a person of 5 feet 7 inches with 12 inches of vertical reach, and both tell buyers to choose by that reach height rather than by the label. Grouping ladders by height lets you start from the gutter, ceiling or fixture you need to reach and work back to the size, rating and style that suit it.

Each height page sets the Werner and Louisville models at that size side by side, with the reach, duty rating, weight and closed length each maker publishes, so you can compare two brands of ladders at one height without hunting through two catalogs.

Shop Ladders by Height by Category

Reading Reach Charts Before Buying Ladders at Any Height

Reach charts answer one question, which is how high an average person can work from a given ladder. Werner’s chart gives average reach heights and Louisville lists a maximum reach for each model, and both rest on the same 5 foot 7 inch climber with 12 inches of reach. A taller or shorter worker shifts the real figure, so treat the chart as a guide and measure the highest point of the job before you pick a size.

The rules on standing level shape those numbers. Werner sets the highest standing level on a step ladder at two steps down from the top, and on an extension ladder at four rungs down from the top, so the top of a ladder is never the working height. Extension ladders also lose some height to the overlap between sections, and Werner advises choosing one 7 to 10 feet longer than the highest point it rests against. Where a ladder gives access to a roof or deck, OSHA calls for the rails to run at least 3 feet past the landing.

Over 50 years of matching ladders to homeowners and contractors has taught us to start a quote with the height of the job, not the size on the rail.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Extension Ladders at Each Height From 16 to 28 ft

The shorter extension sizes cover most houses. 16 ft extension ladders reach about 15 feet on Werner’s chart and suit single-storey eaves, garages and porch roofs. 20 ft extension ladders reach about 19 feet for split-levels, raised ranches and the lower edge of a cape, and they are the first size where Werner adds an aluminum Type IAA model and its lightweight Aerolite. 24 ft extension ladders reach about 23 feet, the height most two-storey gutters, siding and trim call for, and they add Werner’s Aerolite utility versions with a cable hook and V-rung.

28 ft extension ladders reach about 27 feet and suit roof access over a two-storey eave, where the rails must clear the edge. Louisville’s figures for these four sizes run slightly higher than Werner’s, from 15 feet 11 inches at 16 to 27 feet 7 inches at 28, since Werner quotes an average reach height and Louisville a maximum. Across this range the choice between aluminum and fiberglass rails turns on power lines, since fiberglass is nonconductive.

Our team helps you select the extension size from your measured eave or roof height, so the ladders we quote reach the job with room to spare.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Long Extension Ladders for Third-Floor Height, 32 to 40 ft

Above 28 the extension range moves into commercial and multi-storey work. 32 ft extension ladders reach about 31 feet on Werner’s chart for tall gables and two-storey shopfronts, and they are the longest size for Werner’s lightweight Aerolite and three-section models. 36 ft extension ladders reach about 34 feet for third-floor windows and high commercial walls, where the overlap between sections takes a bigger share of the length. 40 ft extension ladders reach about 37 feet on Werner’s chart for three-storey eaves, mill buildings and tall church gables.

At these heights weight and closed length become part of the choice. Louisville lists its 32 ft models from 58 to 70 pounds and its 40 ft models from 78 to 93 pounds, with closed heights to match, so the rack, the carry and the route from truck to wall all deserve planning. Long ladders also need firm footing, which is where levelers and swivel safety shoes earn their place.

Our own trucks deliver door to door across New England, which keeps long ladders off car roofs and borrowed trailers.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Step Ladders by Height for Low and Everyday Reach, 2 to 6 ft

Short step sizes cover shelving, fixtures and most interior ceilings. 2 ft step ladders handle shelving, loading docks and low fixtures, with podium and platform builds for fixed-height work. 3 ft step ladders suit painters, electricians and installers working just overhead, and include a leaning platform for corners and poles. 4 ft step ladders reach about 8 feet on Werner’s chart for light fixtures and smoke alarms, and 5 ft step ladders fill the gap for openers and high shelving in tight rooms.

6 ft step ladders reach about 10 feet on Werner’s chart and are the all-round folding size for ceilings, fixtures and porch lights. At each of these heights a podium or platform model reaches further than a folding step of the same size, because the climber stands at the top level. Our store lists Werner’s podiums with the reach of a step ladder 2 feet taller, and Louisville’s platform reach figures run higher than its standard models in the same way.

Our showrooms in Windham, New Hampshire and Worcester, Massachusetts offer free in-person consultations, so you can try short ladders of each height before choosing.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Taller Step Ladders and Their Standing Height, 7 to 12 ft

The taller step sizes are for high rooms and commercial ceilings. 7 ft step ladders reach about 11 feet for taller living rooms and entry halls. 8 ft step ladders reach about 12 feet for office, retail and school ceilings. 10 ft step ladders reach about 14 feet for gyms, foyers and warehouse lighting, and 12 ft step ladders reach about 16 feet for atriums, stages and high racking, all on Werner’s chart.

Louisville publishes the top standing height for its standard models, which shows how quickly the stakes rise with ladder height, from 68 inches at 8 ft to 114 inches at 12 ft. Weight climbs too, so the taller sizes call for planning how the ladder moves through doors and stairwells. Twin models suit two people working at once, and cross-step models convert into a leaning ladder for work against a wall.

We grade the ladders we sell into our own Apprentice, Journeyman and Master classes, which lets you match build quality to how hard a tall step ladder will work.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Duty Ratings for Ladders at Every Height

Height is only half of the choice, because the duty rating sets how much weight a ladder carries. The ratings in our Werner and Louisville range run from Type II at 225 pounds through Type I at 250 and Type IA at 300 to Type IAA at 375, and the load includes the climber, clothing, tools and material together. Most heights offer several ratings, so a homeowner and a contractor can pick the same size of ladder with very different ratings.

Some ratings come and go with height. Werner’s aluminum D500-2 extension series is Type IAA up to 32 ft and Type IA from 36 ft, and at 2 ft the Werner PD7302-4C podium carries a Type IAA rating where the folding steps at that size are Type IA. Checking the rating on the height page for your size avoids buying a ladder that reaches the work but is rated for less than the load.

Visit either showroom on a Saturday morning, when both locations are open, and we can walk through the ratings available at your height.

Werner D1200-2 Series – Type II Aluminum Extension Ladder

Ladders by Height Alongside Racks, Staging and Safety Gear

The right ladder height often decides the rest of the kit, from the length of the truck rack that carries an extension to the stabilizer, leveler or ladder jacks that go with it. Taller work may move from ladders to staging or pump jack scaffolding, with fall protection for the crew.

To compare racks, staging and safety equipment from the other makers we carry, open our ladder and truck equipment brands hub.

Louisville AE4200 Series – Type II Aluminum Extension Ladder

Quotes on Ladders by Height From Werner and Louisville

Because every height page puts Werner and Louisville side by side, a measured job height quickly becomes a short list. Send us the heights you work to, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we will quote ladders by height across both brands, with the reach, rating and style each job needs.

Ladders by Height FAQs

How do I choose ladders by height?

Measure the highest point you need to work at, then compare it with the maker's reach figure for each size rather than the size on the label.

What height do reach charts assume?

Werner and Louisville both base their reach figures on a person of 5 feet 7 inches with 12 inches of vertical reach.

How high should I stand on a step ladder?

Werner sets the highest standing level two steps down from the top of a step ladder.

How much longer than the wall should an extension ladder be?

Werner advises an extension ladder 7 to 10 feet longer than the highest point it rests against, and OSHA wants the rails 3 feet past any landing you step onto.

Which ladder heights do you compare?

Extension ladders at 16, 20, 24, 28, 32, 36 and 40 ft, and step ladders at 2, 3, 4, 5, 6, 7, 8, 10 and 12 ft.

What duty ratings come at each ladder height?

Most heights offer several, from Type II at 225 pounds to Type IAA at 375 pounds, and each height page lists the ratings available at that size.

Need help choosing the right ladder equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder