Vantech Van Roof Racks
Vantech H2 and H3 Racks, With Rolling Platform Systems, Three-Bar Aluminum Builds, Crossbars, Ratchet Kits and More
An aluminum platform with crossbars 16 inches apart and a rear roller, a three-bar rack sized to one van, shared crossbar profiles, and ratings of 500 to 1,000 lbs.
Vantech H2 and H3 racks answer two different roof jobs, and Nation Wide Ladder helps you decide which one your van needs, then fits and installs it. We list the H2 Series, an aluminum platform with multiple crossbars and an adjustable rear roller for low, medium and high roofs, the three-bar H3 Series, the H3 aluminum crossbar and the RTD ratchet kits that strap a load to either rack.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Vantech H2 and H3 Racks Compared, Rail Platform or Three Bars
Both Vantech racks are aluminum, but they are built for different loads. The Vantech H2 is a platform, with multiple crossbars set close together across the roof, so it handles mixed gear as well as ladders. The H3 is a three-bar ladder rack, with fewer bars set on vehicle-specific mounts, which keeps it light and simple for ladders and long stock. Vantech sums up the H3 as built for work and ready for adventure, and its platform line as modular precision.
The platform has also moved on. Vantech now builds it as the H2.1, a side-rail system with selectable front and rear ends that also accepts side ladders. Our H2 Series listing describes the platform with crossbars 16 inches apart and an adjustable rear roller, and we can confirm the current Vantech configuration for your van when we quote. For a van that hauls ladders only, the H3 often does the job, while a van that carries ladders one week and boxed material the next tends to suit the H2.
Tell our team what goes on the roof, and we will help you choose between these Vantech racks for your van.
The Vantech H2 Series Platform and Its Rear Roller
The Vantech H2 Series we list fits the Ford Transit, Transit Connect, Nissan NV, Chevrolet Express, RAM ProMaster and Mercedes Sprinter, plus the GMC Savana and Ford E-Series, on low, medium and high roofs across all wheelbases. It comes in black, white or silver, with crossbars 16 inches apart and an adjustable roller at the rear for loading and unloading.
On the current H2.1, Vantech lets you choose each end of the rack. One end can stay open for long cargo, carry a roller, close off with a vertical or 40 degree faceplate, or extend the rack by 19.5 inches. Vantech names four common builds, including an open AA rack for long gear and an EB contractor rack with a rear roller. This version is rated at 750 or 1,000 lbs total depending on the number of mounts, and it is offered for the Transit, Sprinter, ProMaster, Express, Econoline and NV Cargo. H2.1 cargo rails in 15.75 and 31.5 inch lengths give loose gear an edge to sit against.
We install the Vantech platforms we supply, so the rails, crossbars and roller line up on your roof as Vantech intends.
Vantech H3 Crossbars, Mounts and Van Fitment
The Vantech H3 Series is an aluminum three-bar rack offered in 12 configurations, each sized to one van, across 11 models from the Ford Transit, Transit Connect and Econoline to the Mercedes Sprinter and Metris, the RAM ProMaster and ProMaster City, the Chevrolet Express, GMC Savana and the Nissan NV Cargo and NV200. Vantech rates it at 750 lbs total on full-size vans and 500 lbs on the compact Transit Connect, Metris, NV200 and ProMaster City.
Its crossbar shares the A285 and A286 profile with the H2.1, J-Series and P-Series racks, so eyehooks, bar guards, ladder stoppers and other crossbar accessories move between them. We list the H3 aluminum crossbar as a separate part for repairs or additions, and Vantech sells the mounting bases in pairs. Our listing shows two 0.75 inch eyehooks per mounting base. A 54 inch roller kit on 36 inch extension plates lets one person roll a ladder onto these Vantech racks rather than lift it.
Our team checks the Vantech configuration against your van model and year before we quote, so the mounts meet your roof.
Securing Loads on H2 and H3 Racks With Ratchet Kits
A roof rack holds its rated load only when the load is strapped down. Vantech makes its RTD ratchet tie-down in separate versions for the H1, H2, H3 and M1 racks, each with 10 foot straps of heavy-duty nylon webbing, for loads that need more tension than a hook and loop wrap. We list the Vantech RTD-H3 ratchet kit along with a combined RTD kit for the H1 and H3.
Ratchets work best with stops that keep the ladder from shifting before the strap is tight. The Vantech ladder stopper fits A285 and A286 crossbars, which covers the H3 and the H2 aluminum systems, and has a rubber coated top and a bent tip to hold a ladder down without rattling. Vantech recommends pairing it with hook and loop straps, and an adjustable guide with an eyehook can sit anywhere along the bar to stop gear moving side to side.
Add the stops and ratchet kits to your rack quote, and we deliver the complete set across New England on our own trucks.
Where H3 and H2 Racks Sit in a Full Van Upfit
A roof rack and a van interior work as a pair. With ladders and pipe on Vantech racks overhead, the cargo floor is free for shelving and drawers, and Vantech configures its trade packages to the wheelbase and roof height when they are ordered. Plan the roof load first, since it decides how much room the interior can give to bins and stock.
If you are lining up Vantech against other rack and shelving makers, compare them in our ladder and truck equipment brands hub.
Order Vantech H2 and H3 Racks for Your Van
See how both lines fit into our Vantech van roof racks range, read about the wider Vantech rack lineup, or browse the Vantech products we list.
For Vantech H2 and H3 racks matched to your van, Nation Wide Ladder takes quote requests by list or phone at 603-434-6911 in NH and 508-754-3030 in MA, with Saturday morning hours at both locations.
Vantech H2 and H3 Racks FAQs
What is the difference between the Vantech H2 and H3?
The H2 is an aluminum platform with crossbars set 16 inches apart and a rear roller, suited to mixed gear. The H3 is an aluminum three-bar rack on vehicle-specific mounts, suited to ladders and long stock.
How much weight do Vantech H2 and H3 racks hold?
Vantech rates the H3 at 750 lbs on full-size vans and 500 lbs on compact vans, and the current H2.1 at 750 or 1,000 lbs depending on the number of mounts.
Is the Vantech H2 Series the same as the H2.1?
The H2.1 is the current version of the Vantech platform, with selectable front and rear ends. We confirm the configuration for your van when we quote.
Do Vantech crossbar accessories move between racks?
Yes. The H3 crossbar shares the A285 and A286 profile with the H2.1, J-Series and P-Series, so crossbar accessories such as eyehooks and ladder stoppers move between them.
Which ratchet kit fits a Vantech H3 rack?
We list the Vantech RTD-H3 ratchet kit and a combined RTD kit for the H1 and H3. Each Vantech RTD kit uses 10 foot nylon straps.
Need help choosing the right Vantech equipment?
Talk to the team or send us your list and we will put a quote together.











