Holman Van Racks
Holman Van Cargo Racks, Pro III Steel and HD Aluminum Platforms, Vehicle Kits, Cap Racks and Mount Kits
Multi-crossbar Pro III roof platforms for pipe, lumber, ladders and bulky gear, with vehicle-specific kits for GM, Ford, Ram, Nissan and Mercedes-Benz vans and capped pickups.
Pipe, lumber, ladders and awkward loads all need tie-down points on the same roof, which is why contractors come to us for Holman van cargo racks, working platforms with several crossbars and side rails. At Nation Wide Ladder we list the Holman Pro III cargo range and fit it to your vehicle. The range covers the 8016A HD aluminum platform with its wind deflector and roller bar, the 100 inch 8010A for compact vans and capped trucks, 80 and 120 inch cap racks, complete steel and HD aluminum vehicle kits, and the separate mount kits the standalone racks need.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Needs a Full Holman Van Cargo Platform
A ladder rack is built around one job, while a cargo rack is built for whatever the day brings. Plumbers carrying ten foot lengths of copper and PVC, HVAC crews with line sets and duct sections, carpenters with trim stock and landscapers with long-handled tools all need a roof that accepts mixed loads and lets them strap things down in several places. That is the gap a Holman van platform fills.
The design runs side rails along each edge of the roof with crossbars spanning between them, which supports a load at more than two points along its length. Long, flexible material sags less, short items have somewhere to sit, and straps can be anchored wherever the load falls. Ladders still ride on a Holman van cargo platform, but they are tied down rather than locked, so crews that load ladders all day may prefer a Clamp & Lock or drop down rack.
Fleets that cannot predict next year’s work also do well with Holman van cargo racks. A van that carries conduit this season and sheet goods the next can keep the same rack and add accessories instead of swapping the whole system.
Our team helps you decide whether a Holman van platform or a dedicated ladder rack suits the loads your crews carry.
Holman Van Cargo Rack Models and Vehicle Kits
Two flagship Holman racks anchor the range. The Holman 8016A Pro III HD aluminum cargo rack is a tube-style platform with five crossbars, a front wind deflector and a rear roller bar, made for GM vans, the standard roof Sprinter and low roof Transit, NV and ProMaster. The 8010A is a 100 inch version for compact vans and capped trucks, with crossbars that mount at two heights.
For pickups with a cap, Holman adds the 8008A at 80 inches and the 8012A at 120 inches. The 8010A and 8012A both call for the 4089D mount kit, and the 8016A and 8008A also list a mount kit as a separate requirement.
The rest of the Holman range comes as vehicle kits that bundle rack and mount kit in one part number. HD aluminum kits cover GM, NV, NV200, ProMaster, ProMaster City, Sprinter, Transit Connect and low roof Transit vans, along with 6.5 and 8 foot commercial caps. Steel kits cover GM, Metris, NV, NV200, ProMaster, ProMaster City, Sprinter, Transit Connect and low roof Transit.
Send us a list of the Holman van racks and kits you are weighing, and we will quote them with the right mount kits.
Steel or HD Aluminum for a Holman Van Cargo Rack
A full platform covers more of the roof than a ladder rack, so its own weight matters more. HD aluminum keeps that weight down, which protects payload on a loaded work van and makes a real difference on compact vans like the NV200 and Transit Connect. Aluminum also stays free of rust after a winter of salted roads.
Steel Holman kits cost less and take rough loading in stride. A crew that drops steel pipe or rebar onto the rack day after day may prefer a frame that dents rather than scuffs, and steel is easy to repair or repaint. Both materials share the Pro III layout, so a fleet can mix steel and aluminum by vehicle without changing how its crews load.
The 8016A shows what a full Holman van platform adds. The wind deflector at the front cuts noise and drag at highway speed, and the rear roller bar lets you slide long material up and off the back instead of lifting it onto the roof. Holman builds its van racks to SAE and ASTM manufacturing processes.
You can compare steel and aluminum Holman racks side by side during a free consultation at our Windham NH or Worcester MA showroom.
Matching a Holman Cargo Rack to Your Van and Load
Fitting Holman van cargo racks starts with the vehicle and roof height. The 8016A covers low and standard roof vans only, and kits are named for a specific make and model, so a ProMaster City kit will not fit a full-size ProMaster. On a capped pickup, measure the cap and choose between the 80, 100 and 120 inch racks or the 6.5 and 8 foot cap kits.
Next, check what the listing includes. Kits ship with a mount kit, but the standalone racks need one added to the order. If you plan to fit retractable ratchet straps or a conduit carrier, add them at the same time so the mounting points are planned from the start.
Once the rack is on, tie long material down at no fewer than two crossbars, keep heavy items centered between the side rails, and avoid stacking loads high enough to catch the wind. Check mount kit bolts and strap anchors regularly, since vibration loosens hardware over time.
We install the Holman rack, mount kit and accessories on your van and can confirm the load rating for your exact setup.
Holman Van Cargo Platforms and the Gear Inside
A roof platform handles long and bulky loads, but most vans that carry one also need organized storage inside for parts and tools. Choosing the two together keeps weight balanced between the roof and the floor.
For a wider view before you buy, our ladder and truck equipment brands hub puts Holman beside the other makers we carry.
Get Holman Van Cargo Racks
Over 50 years of serving contractors have shown us how much a work van gains from a roof that takes the loads a ladder rack cannot, which is what Holman van cargo racks are built to do. Browse our Holman cargo racks and kits, see how they sit within the Holman van racks family and the whole Holman truck and van equipment catalog, or send us your vehicle details for a quote.
Holman Van Cargo Racks FAQs
What comes with the Holman 8016A van cargo rack?
Our listing shows the 8016A as a tube-style HD aluminum rack with five crossbars, a wind deflector up front and a roller bar at the back. A mount kit is required and is sold separately.
Which mount kit does the Holman 8010A need?
Our listings for both the 8010A and the 8012A call for the 4089D mount kit. The vehicle-specific Holman van kits already include their mount kit.
Can a Holman cargo rack fit a pickup with a cap?
Yes. The 8008A (80 inch), 8010A (100 inch) and 8012A (120 inch) are listed for trucks with caps, and HD aluminum kits are offered for 6.5 and 8 foot commercial caps.
Should I choose a steel or aluminum Holman van cargo rack?
HD aluminum saves roof weight and avoids rust, which helps most on compact vans. Steel costs less and stands up well to rough loading. Both share the Pro III layout.
Which vans do Holman cargo kits cover?
Holman kits are listed for GM, NV, NV200, ProMaster, ProMaster City, Sprinter, Transit Connect and low roof Transit vans, with the Metris covered in steel.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.











