Resources

Planning a Ford Transit Upfit by Wheelbase and Roof, With Shelving, Bulkheads, Ladder Racks, Mount Kits and More

The order to plan a working Transit in, from reading wheelbase and roof off the van to choosing the interior, the partition and a ladder rack that suits the roof height.

A Ford Transit upfit goes smoothly when you settle the van's wheelbase and roof height before anything else, because shelving, bulkheads, ladder racks and mount kits are all sold to fit one exact body. Nation Wide Ladder supplies and installs Holman and Weather Guard equipment for the Ford, and we plan the interior shelving, the partition, the roof rack and its mount kit as one job for low, mid and high roof vans.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Start a Ford Transit Upfit With Wheelbase and Roof

The full-size Ford comes on a 130 or 148 inch wheelbase, with a low, mid or high roof, and there is also an extended 148 inch body. Every one of those combinations takes its own upfit equipment, so the first step is reading the door jamb label or registration paperwork rather than judging the van by eye. Two Ford Transit vans with the same roof can still need different kits if the wheelbase or body length differs.

Those two numbers decide almost everything in the upfit that follows. The wheelbase sets how long the shelving runs along each wall, the roof sets how tall the units stand and which bulkhead fills the opening, and the roof also decides how high a ladder will ride and how hard it is to reach.

Write down what the Ford will carry before you look at catalogs. Ladders, pipe, parts, tanks or parcels each point the upfit in a different direction, and knowing them early keeps you from buying a rack the interior does not need.

Our team reads the Ford’s door sticker against each part number before we quote, so the wheelbase, roof and body length line up from the start.

Choosing Shelving and a Bulkhead for the Ford Transit

We list 64 Holman Ford Transit van shelving packages. Low-roof Fords take 46 inch units, while mid and high roof Fords take 60 inch units. The low-roof Ford has the widest menu, and it is the only Transit roof we list with the Commercial Bin, General Contractor, Tradesman Service, EZ All Trades and EZ General Service packages. On the high-roof Ford, the Quick Package tiers and folding shelves with a sliding partition are listed for the 148 inch van, as the Holman Ford Transit high roof range sets out.

Weather Guard numbers its Ford kits the same way, from 600-8110R and 600-8110L for the 130 and 148 inch low-roof van to 600-8410L and 600-8410X for the high-roof 148 inch and its extended body. Its Ford Transit bulkheads come in steel window, steel screen and composite versions by roof, with deep offset steel models marked by a D suffix for full seat travel. A high-roof Ford with the composite bulkhead also needs header panel 96320-3-01.

On upfit day we install the shelving and partition together, so the bulkhead sits square before the units go in against it.

Holman Ford Transit Van Shelving

Ladder Racks and Mount Kits for Each Ford Transit Roof

Roof height changes the ladder question more than any other part of the upfit. On a low-roof Ford, a crew can reach the ladder from the ground or the rear bumper, which suits a clamping rack. Every complete Holman Clamp & Lock kit we list for this van carries Transit LR in its title, and the Holman Transit ladder racks include steel and HD aluminum single and double kits with the 408TC mount kit.

On a mid or high roof Ford, the ladder rides far higher and lifting it down becomes the hard part of the day. Holman lists a Transit drop down mount kit (409TD), and the Weather Guard EZGLIDE2 rotates the ladder down beside the van, then slides it a further 2 ft. It needs a Weather Guard channel kit, 2130-0-01 for the mid-roof 130 inch Ford or 2102-0-01 for mid and high roof 148 inch Fords, including the extended high roof.

Crews that carry pipe more than ladders can look at a crossbar or cargo platform instead, and Holman lists an aluminum full length rail mount kit (40918) that names the Transit.

Bring the Ford to our Windham, NH or Worcester, MA showroom for a free consultation, and we will look at the roof before suggesting a rack for the upfit.

Holman Ford Transit Ladder Racks

Ford Transit Upfit Choices Beyond One Maker

A working Ford upfit rarely comes from a single catalog. Some fleets fit Holman shelving inside and a Weather Guard rack on the roof, while others keep the Ford Transit interior and rack with one maker so parts and layouts match across every van. The Weather Guard van packages show the core-kit route, with shelving and a bulkhead sized to the Ford’s roof and wheelbase.

When you want to compare more makers for the same van, our ladder and van equipment brands hub has them gathered.

Weather Guard Van Packages

Ford Transit Upfit Weight, Weather and Order of Work

Payload ties the upfit together. Steel shelving, drawers, a partition and a rack all count against the Ford before any tools go in, so keep the heaviest stock low inside and long, light material on the roof. Aluminum racks keep weight off the roof and resist the rust that salted New England roads bring, while steel racks tolerate rough loading at a busy site.

Order matters on upfit day. The bulkhead goes in first because it sets the front wall that shelving is planned against, then the shelving units, then the roof rack and its mount kit, so roof bolts do not end up where a shelf needs to sit. Accessories such as step ladder brackets, a second mechanism or a conduit carrier are easier to fit with the rack than after the Ford is back in service.

After the first few weeks, check shelf, partition and rack mount fasteners, since vibration settles the hardware of any upfit.

Send us one list with the Ford’s wheelbase, roof and the parts you want, and we will price the whole upfit in a single quote.

Your Ford Transit Upfit, Planned and Installed

For more than 50 years we have helped contractors set up work vehicles, and Nation Wide Ladder fits each Ford Transit upfit with matched shelving, bulkhead and rack, installed by our own team.

Ford Transit Upfit FAQs

What should I check first for a Ford Transit upfit?

The wheelbase (130 or 148 inches, or the extended 148 inch body) and the roof height (low, mid or high). Shelving, bulkheads, racks and mount kits are all sold to fit those exact combinations.

Which shelving fits a low roof Ford Transit upfit?

Holman uses 46 inch units in the low-roof Ford and 60 inch units in the mid and high roof versions.

Which ladder rack suits a high roof Ford Transit?

A lowering rack usually helps on a tall Ford. Holman lists a Transit drop down mount kit (409TD), and the Weather Guard EZGLIDE2 fits mid and high roof Fords with a matching channel kit.

Does a high roof Ford Transit need anything extra for a composite bulkhead?

Yes. Weather Guard lists header panel 96320-3-01 with the composite bulkhead on high roof Fords.

Can you install a complete Ford Transit upfit?

Yes. We install shelving, bulkheads, racks and mount kits, so the whole van is fitted in one job.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder