Vantech range
Vantech Van Roof Racks, With Steel and Aluminum H1, Rolling H2 and Three-Bar H3 Systems, Mounts and More
Drip-rail clamps, OEM mounts and drill-on bases, ratings set by the number of mounts, and fitment by make, wheelbase and roof height for full-size and compact cargo vans.
Choosing Vantech van roof racks starts with how the rack meets your roof, and Nation Wide Ladder helps you settle that, matching the mount and the rack to your van before we install it. We list the Vantech H1 Series in steel and aluminum, the H2 Series with crossbars 16 inches apart and a rear roller, and the three-bar H3 Series, plus the crossbars, ladder stops, anchors, rollers and ratchet kits that go on a Vantech van roof rack.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Who Vantech Van Roof Racks Suit, From Electricians to General Contractors
Any trade that carries something longer than the cargo floor needs space on top of the van. Vantech organizes its van catalog around the same trades, with trade packages for electricians, plumbers, HVAC crews and general contractors, and its van roof racks are the part of that system that handles ladders, conduit, pipe, lumber and other long stock. Keeping that load overhead frees the cargo floor for shelving, drawers and the tools a crew reaches for all day.
Vantech builds its racks for the cargo van models that make up most trade fleets. The racks we list are offered for the Ford Transit and Transit Connect, Chevrolet Express, GMC Savana, Nissan NV, RAM ProMaster, Mercedes Sprinter and Ford E-Series, and Vantech catalogs further versions for the Mercedes Metris, Nissan NV200, RAM ProMaster City and older Econoline and Dodge RAM vans. A van roof rack with a listed fit is designed to land on the right points of that van, which is why the van model comes first in any Vantech quote.
Over 50 years of serving contractors has taught our team which van setups a trade fleet leans on, and we bring that to your Vantech order.
The Vantech H1, H2 and H3 Roof Systems We List
Three Vantech systems make up our range. The H1 Series is the rectangular-bar rack, built on 2 by 1 inch crossbars with a bar guard on top and four eyehooks on each mounting base. We list it in aluminum for the major cargo vans and in steel for all wheelbases, and Vantech offers two-bar and three-bar builds. Our Vantech H1 Series racks page goes through those models one by one.
The H2 Series is the platform-style option, with multiple crossbars set 16 inches apart and an adjustable rear roller for loading from behind the van, and our listing fits low, medium and high roofs on all wheelbases. Vantech has since moved this line to the modular H2.1, a side-rail system with selectable front and rear ends. The H3 Series is an aluminum three-bar rack, built in configurations that are each sized to one van. You can compare the two lines on our Vantech H2 and H3 racks page.
Send us the van and the load, and our team will tell you which of the three Vantech systems fits your van.
Mounting Vantech Racks Without Drilling the Van Roof
Vantech uses three ways to attach a rack, and the van decides which applies. An OEM mount bolts to the factory mounting points built into some van roofs. A drip-rail clamp grips the rain gutter along the top edge of vans that have one. A universal drill mount fastens through the van body itself, which is the route for vans without a vehicle-specific fit. The H1 for the 2015 and newer Ford Transit installs with no drilling, while the universal H1 needs it.
The H3 rides on vehicle-specific mounting bases that Vantech sells in pairs, one for each end of a bar, and Vantech also offers plus nut kits with a rivet tool for vans that take threaded inserts. On H1 uprights, the base is welded to the post to seal the joint, and a rubber cap keeps water and wind noise out of the tube. Getting the mount right is what lets a Vantech van roof rack hold its rated load without stressing the van.
We install the racks and truck equipment we sell, so the mounts on your Vantech rack are set by our crew rather than left to guesswork.
Roof Height, Wheelbase and Load Limits on a Vantech Van Rack
Vantech matches its vehicle-specific racks by make, model, wheelbase and roof height, and the listings show why. The H1 is cataloged separately for low-roof and high-roof Sprinters, for the 144 inch and 170 inch wheelbases on the high-roof Sprinter, and for the 2010 to 2013 and 2014 and newer Transit Connect. A rack built for one van will not line up with another, so check the door sticker and roof height before you order.
Load limits follow the mounts. Vantech rates each mount at 125 lbs, which puts the H1 at 500 to 750 lbs and the H3 at 750 lbs on full-size vans and 500 lbs on compact ones such as the Transit Connect, Metris, NV200 and ProMaster City. The modular H2.1 reaches 750 or 1,000 lbs depending on the configuration. Count ladders, conduit tubes and fittings in that figure, because the rating covers everything on the van.
Our team checks your van, roof height and wheelbase against the Vantech listing before we quote, so the rack arrives built for your van.
Ladders and Long Stock on Vantech Van Roof Racks
The rack is only as useful as the ladder it carries. An extension ladder, a stepladder for interior work and a bundle of conduit all compete for the same crossbars, so plan where each one sits before the rack is fitted. Ladder stops, side stops and ratchet tie-downs are what hold those items in place once they are loaded, and Vantech sizes them to its own crossbars.
To see the ladder makers and other rack brands we carry next to Vantech, look through our ladder and truck equipment brands hub.
Get a Vantech Van Roof Rack Quote From Our Team
See our cargo van roof racks, or read about the full Vantech van rack range.
For Vantech van roof racks fitted to your roof and your trade, Nation Wide Ladder offers free consultations at our Windham, NH and Worcester, MA showrooms, then installs the rack and delivers across New England.
Vantech Van Roof Racks FAQs
Do Vantech van roof racks need drilling?
It depends on the van. Vantech offers OEM mounts and drip-rail clamps that install without drilling, such as the H1 for the 2015 and newer Ford Transit, while the universal H1 rack is drilled into the van.
How much weight can a Vantech van rack carry?
Vantech rates each mount at 125 lbs. The H1 runs from 500 to 750 lbs, and the H3 is rated at 750 lbs on full-size vans and 500 lbs on compact vans.
Do Vantech racks fit high-roof vans?
Yes. Vantech matches its vehicle-specific racks by roof height as well as make, model and wheelbase, and the H2 Series we list fits low, medium and high roofs on all wheelbases.
What is the difference between the Vantech H1, H2 and H3?
The H1 uses 2 by 1 inch rectangular crossbars in steel or aluminum. The H2 is a platform with crossbars 16 inches apart and a rear roller, and the H3 is an aluminum three-bar rack sized to one van.
Can I add a roller to a Vantech van roof rack?
Yes. The H2 Series we list includes an adjustable rear roller, and Vantech offers roller kits and rear roller bars for its other racks.
Need help choosing the right Vantech equipment?
Talk to the team or send us your list and we will put a quote together.









