Holman Van Racks
Holman Van Crossbar Racks, Steel and HD Aluminum Two-Bar Racks, Middle Crossbars, Roller Bars, Ratchet Straps and More
Two-bar roof racks for GM, Transit, Transit Connect, Metris, NV200 and ProMaster City vans that carry a ladder or a few lengths of material, built up with extra bars and straps.
For a van that carries a ladder or a few lengths of material but does not need the weight or cost of a full roof platform, we recommend and fit Holman van crossbar racks. At Nation Wide Ladder we list them in steel and HD aluminum for GM full-size vans and for the Transit, Transit Connect, Metris, NV200 and ProMaster City, and we install them for you. The Holman range covers the four core two-bar racks, matching middle crossbars, the 40831 aluminum rear roller bar, and 1 inch and 2 inch retractable ratchet straps, including versions with Pro III mount brackets.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
When a Holman Crossbar Rack Is Enough for the Van
Plenty of vans carry one ladder a couple of times a week, or a handful of pipe lengths now and then. For that work a full cargo platform adds weight, cost and wind noise the van does not need. A crossbar rack keeps things basic, with a bar at the front and a bar at the rear of the roof so long items have two solid points to rest on and be strapped to.
That makes Holman van crossbar racks a good match for property maintenance crews, painters, small plumbing and electrical shops, and delivery or service vans that only occasionally carry something long. They also appeal to buyers who want a clean roof when nothing is on it, since two bars sit lower than a full rack with side rails. The tradeoff is that loads must be strapped every time, because there is no locking mechanism.
A Holman crossbar rack can also be a first step. A business that starts with two bars can add a third bar for short loads, a rear roller bar for easier loading and retractable straps for faster tie-downs, without replacing the rack.
Our team helps you judge whether a Holman crossbar rack covers what your van carries or whether a cargo or ladder rack will serve you better.
Holman Van Crossbar Rack Models and Add-Ons We List
Four core Holman racks make up the range, two per material. In steel, the 40823 fits GM full-size vans and the 40821 fits the Ford Transit, Transit Connect, Mercedes-Benz Metris, Nissan NV200 and Ram ProMaster City. In HD aluminum, the 4A823 covers GM vans and the Holman 4A821 HD aluminum crossbar rack covers the same five vans as the 40821, with a mount kit required on a full-size Transit.
Each Holman rack has a matching middle bar for shorter cargo and short ladders. The 40822 suits the 40821, a separate middle bar suits the 40823 and 40825, the 4A824 suits the 4A823, and the 4A822 suits the 4A821. The 40831 aluminum rear roller bar works with the 40821 and 40822 or the 4A821 and 4A822 pairings.
Retractable ratchet straps finish the set. Holman offers 1 inch by 6 foot pairs (40830) and 2 inch by 7 foot pairs (40850) for crossbar racks, plus 2 inch and 1 inch versions that come with Pro III mount brackets (31493 and 31503).
Send us the Holman part numbers you want for your van and we will quote the rack, bars and straps together.
Holman Crossbar Materials and Van Strapping
The steel and HD aluminum versions follow the same two-bar idea, so the choice comes down to weight, budget and climate. Aluminum suits compact vans like the NV200 and ProMaster City, where roof weight cuts into a small payload, and it holds up to road salt without rusting. Steel is the lower-cost option and tolerates heavy, careless loading, which suits a van that hauls pipe more than ladders.
Holman states that it makes its racks in steel and HD aluminum using SAE and ASTM manufacturing processes. On a two-bar rack the bars do all the work, so their condition and mounting matter more than on a rack with rails and mechanisms.
Strapping keeps the load where it belongs. Holman retractable ratchet straps stay attached to the rack and wind back in when you release them, so there is no loose strap to lose. The 2 inch straps suit heavier loads such as ladders and bundles of pipe, while the 1 inch straps suit light material. Strap a long load at both bars, and add the third bar when a load is too short to span the front and rear.
You can handle steel and aluminum Holman bars and try the straps during a free consultation at our Windham NH or Worcester MA showroom.
Choosing, Fitting and Caring for a Holman Van Crossbar Rack
Match the rack to the van first. The GM racks are separate parts from those for the Transit family and compact vans, and a full-size Transit needs a mount kit with the 4A821. Then decide on the extras. If you carry a ladder shorter than the gap between the bars, order the matching middle bar, and if you load long items alone, the rear roller bar takes much of the strain out of sliding them on and off.
Keep loads modest. A two-bar rack has less contact with the load than a full platform, so heavy bundles are better spread across a third bar or carried on a cargo rack. We can check the Holman rating for your rack and van before you rely on it for heavy material.
Check bar mounts and fasteners every few weeks, look over strap webbing for cuts or fraying, and retract straps fully when not in use. Clear ice and road grime from the ratchets in winter so they keep releasing smoothly.
We install the Holman crossbar rack, middle bar and roller bar on your van so the spacing and mounts are set correctly.
Holman Van Crossbar Racks as a Starting Point
A two-bar roof often comes first on a van whose job is still taking shape. As the work settles, many crews add interior shelving or move up to a ladder or cargo rack, and planning those steps early keeps the mounting points consistent.
If you want to compare Holman with other makers at that stage, browse our ladder and truck equipment brands hub.
Order Holman Van Crossbar Racks
With Holman van crossbar racks, a light-duty van gets a tidy, affordable roof that grows with add-ons, and Saturday morning hours at both of our showrooms make it easier to drop in after a work week. Browse our Holman crossbar racks and accessories, compare other Holman van racks, or see our overview of Holman truck and van equipment before you request a quote.
Holman Van Crossbar Racks FAQs
Which Holman crossbar rack fits a Ford Transit Connect van?
The steel 40821 and the HD aluminum 4A821 are both listed for the Transit, Transit Connect, Metris, NV200 and ProMaster City. The 4A821 needs a mount kit on a full-size Transit.
Can I add a third crossbar to a Holman van rack?
Yes. Each Holman rack has a matching middle bar, such as the 40822 for the 40821 and the 4A822 for the 4A821. A third bar supports shorter loads and short ladders.
What does the Holman rear roller bar do?
The 40831 aluminum rear roller bar fits at the back of a 40821 or 4A821 setup and lets you roll long items onto the roof from the rear of the van instead of lifting them.
Which retractable straps work with Holman van crossbar racks?
Holman lists 1 inch by 6 foot (40830) and 2 inch by 7 foot (40850) pairs for crossbar racks, and matching straps with Pro III mount brackets (31503 and 31493).
Is there a Holman crossbar rack for GM vans?
Yes. The steel 40823 and the HD aluminum 4A823 are the Holman crossbar racks listed for GM full-size vans.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.











