Weather Guard range

Weather Guard Truck Racks: Steel Ladder Rack, Hex and Half Bar Headache Racks, Cab Protectors and More

A no-drill steel ladder rack rated for 1,000 lb, aluminum hex and half bar headache racks, the PROTECT-A-RAIL cab protector, box fitment, loading and inspection for full-size pickups.

Long ladders, pipe and lumber outgrow a pickup bed quickly, which is why contractors fit Weather Guard truck racks above the bed and behind the cab. Nation Wide Ladder helps you choose and install the right rack for your truck, from the no-drill steel 1275-52-02 ladder rack to aluminum hex and half bar headache racks and the PROTECT-A-RAIL cab protector.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Weather Guard Truck Racks Do on a Work Pickup

A pickup bed runs out of length long before a contractor runs out of ladder, conduit or lumber. An over-bed ladder rack lifts that material above the bed and the boxes, while a headache rack sits behind the cab and protects the rear window if cargo slides forward under hard braking. Weather Guard designs both kinds of truck rack to work with its own truck boxes, which suits roofers, electricians, plumbers and builders who need a box and a rack on the same truck. Each Weather Guard rack also shares the ARMOR-TUF powder coat used on the boxes, so a matched truck setup looks like one system.

Weather Guard’s own guidance matches rack types to trades. It points general contractors, roofers, landscapers and construction crews toward an over-bed truck ladder rack, since lifting ladders and lumber above the bed frees the floor for boxes and bulk material. A headache rack suits almost any pickup that hauls ladders, lumber or pipe, because it stops long material from sliding into the cab. For New England crews working through winter weather, the corrosion-resistant aluminum in Weather Guard headache racks is a practical advantage on wet, salted roads.

We have served contractors and homeowners for over 50 years, so we can talk through which mix of ladder rack and cab protection your trade actually uses.

Weatherguard 1059-52-01 – Truck Rack Cab Protector, Steel, Full Size

Weather Guard Steel Ladder Rack, Headache and Cab Protector Models

Steel truck rack 1275-52-02

The Weather Guard 1275-52-02 steel truck rack fits full-size beds and clamps to the stake pockets, so no drilling is needed. Weather Guard rates it for 1,000 lb distributed evenly, and the front legs adjust for a wide range of trucks.

Headache rack styles

Weather Guard builds headache racks in four styles, which are open frame, louvered, hex mesh and half bar. We stock the hex model 11906-52-01, which Weather Guard positions as giving the most cab protection plus clearance for ladders and materials, and the half bar model 11908-52-01, a lighter, low profile choice for light duty work. The open frame gives the clearest view out of the rear window, and the louvered design offers a solid, professional look with extra protection. Height adjustment sets the clearance above the cab, and accessories include side light brackets, center light brackets, cargo stops and leveling spacers.

PROTECT-A-RAIL cab protector

The PROTECT-A-RAIL heavy duty cab protector is designed for full-size pickups, comes in black ARMOR-TUF powder coat and accepts add-on accessories. Cab protectors have been part of the Weather Guard truck line since the early 1980s.

Our team checks which headache rack style and bracket set suit your cab and bed before we quote, so the model fits the truck you drive.

Weatherguard Model 11906-52-01 Hex Headache Rack

Weather Guard Truck Racks Alongside Pickup Storage

A rack handles what rides above the bed, but most working trucks also need lockable storage underneath it. Weather Guard designs its racks around its own saddle, side and wheel well boxes, which is why each headache rack ships with leveling spacers. The Weather Guard truck boxes range shows how a box and a rack share one bed, and many crews weigh several manufacturers before building out a truck.

If you are comparing makers for the whole truck, take a look at every manufacturer we carry through our truck equipment and ladder brands hub.

Weatherguard 1275-52-02-Truck-Rack-Steel-Full-Size-1000lb

Ratings, Materials and Finish on Weather Guard Racks

The 1275-52-02 is a steel truck rack in matte black powder coat with a welded airfoil to cut drag, a tie-down loop on each leg and four more tie-down points along the side members. Weather Guard headache racks use corrosion-resistant aluminum finished in gloss black ARMOR-TUF powder coat, with an accessory channel for side and center light brackets. Both the steel rack and the hex headache rack carry a limited lifetime warranty.

The 1,000 lb figure on the steel rack is a distributed rating, so it describes weight spread across the cross members rather than a heavy point load in one spot. Weather Guard adds that real carrying capacity also depends on rack design, the number of cross members, the materials and the way the rack was installed, so the truck’s own payload has to be counted alongside the rack. A full-size pickup carrying a loaded saddle box, a rack and several ladders can reach its payload limit before the rack reaches its rating. Weather Guard notes the powder coat also serves as a sound undercoat if you later paint a rack to match a fleet color.

Both finishes and rack styles are easier to judge in person, and our Windham, NH and Worcester, MA showrooms offer free consultations and estimates.

Weatherguard Model 11908-52-01 Half Bar Headache Rack

Fitting a Weather Guard Rack Over a Truck Box

The steel rack’s stake pocket clamps avoid damage to the bed, and a separate no-drill kit for 2016 and newer Chevy and GMC trucks uses the rear stake pockets. Weather Guard headache racks use adjustable brackets intended for most full-size Ford, Chevrolet, GMC and Ram pickups, and they ship with brackets and hardware. Most installs need only hand tools, but some trucks and mounting setups will need drilling, so check the fitment guide for your model first. Running a rack with a box may call for the leveling spacers included with each headache rack, which set the box flush with the rack’s feet.

Before choosing, check the bed for anything that could get in the way of the clamps or brackets, such as bed liners, tie-downs or tool mounts, and note the truck’s year, make and model, since fit can differ on newer trucks with aluminum beds or unusual rail shapes. Weather Guard recommends professional installation for long-term reliability.

Send us both model numbers with your truck details and we will quote the rack and box as one setup, or call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts.

Weather Guard PROTECT-A-RAIL® Heavy Duty Cab Protector

Loading, Inspecting and Securing Cargo on a Weather Guard Rack

Spread the load along the rack rather than piling it at one end, since the 1,000 lb figure assumes even distribution. Use the leg loops and side tie-down points, and wrap any contact spots with the protective tape supplied with the rack so ladders are not chafed. Rear handlebars help you climb on and off, and the rear cross member comes out on removable pins when an oversized load needs to slide in.

Before each trip, check that the stake pocket clamps and bracket hardware are still tight, because a rack that has shifted on its mounts no longer spreads weight the way it was designed to. Salt and wet weather are hard on any fastener, so a quick look after a winter storm is worth the minute it takes. Headache racks do not come with lights, so plan any work lighting around the accessory channel and the light brackets Weather Guard sells for it.

We install truck racks as well as sell them, so the clamps, brackets and spacers on your truck are set by our team before the first load goes up.

Weather Guard Truck Racks Delivered Across New England

A rack that carries the load evenly, protects the cab and lines up with the box underneath it keeps a work truck productive. Our own trucks deliver door to door across New England, and Nation Wide Ladder quotes and installs Weather Guard truck racks for your pickup, so browse our truck racks category, return to the Weather Guard brand overview, or ask us for a quote.

Weather Guard Truck Racks FAQs

Do I need to drill my truck to install the Weather Guard 1275-52-02 rack?

No. It mounts to the bed's stake pockets with clamps, and a separate no-drill kit covers 2016 and newer Chevy and GMC trucks using the rear stake pockets.

How much can the Weather Guard steel truck rack carry?

Weather Guard rates the 1275-52-02 for 1,000 lb when the load is evenly distributed. Your truck's own payload limit still applies.

Which headache rack styles does Weather Guard make?

There are four, which are open frame, louvered, hex mesh and half bar. The hex gives the most cab protection, and the half bar is a lighter, low profile option.

Will a Weather Guard truck rack work with my truck box?

Yes, the racks are designed to work with Weather Guard boxes. Leveling spacers come with each headache rack so the box sits flush with the rack's mounting feet.

What accessories fit Weather Guard headache racks?

Weather Guard offers side light brackets, center light brackets and cargo stops that attach through the rack's accessory channel. The racks themselves do not include lights.

Do you install Weather Guard truck racks?

Yes. We install truck and van equipment, including racks, truck boxes and transfer tanks.

Need help choosing the right Weather Guard equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder