Werner Specialty Ladders

Werner Multi-Position Ladders in the MT Series, From MT-13 to MT-26, With Five Setups and More

Twin step, stairway step, extension, wall and scaffold base modes, Type IAA 375 pound rating with 300 pounds per side, reach heights from 13 to 26 feet, levelers and lock checks.

Remodelers and maintenance crews who juggle stairways, uneven floors and straight climbs often haul three ladders where one would do, and Nation Wide Ladder cuts that load with Werner multi-position ladders, an MT frame that sets up five ways. We quote the MT series in 13, 17, 22 and 26 foot reach heights, and we help you match the Werner multi-position size, levelers and platform to the work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Werner Multi-Position Ladders Replace on a Job

A typical remodeling van carries a step ladder, an extension ladder and something short for stairs. The Werner MT series folds those jobs into one frame that sets up as a twin step ladder, a stairway step ladder, an extension ladder, a wall ladder or two scaffold bases for a plank. Werner describes it as built for versatility, with comfort and durability in mind.

Painters reaching over a staircase, finish carpenters moving between rooms, electricians who need a short wall ladder one hour and a twin step the next, property managers handling a mix of repairs and homeowners with limited storage all gain from that range. The stairway mode answers a job that standard ladders handle poorly, since OSHA allows a ladder only on stable, level surfaces unless it is secured. The scaffold base mode pairs two halves with a plank for low, wide work along a wall.

There are limits. OSHA requires each ladder to be used only for the purpose it was designed for, and Cal/OSHA warns against using a step ladder as a single ladder or partly closed, so set up the Werner multi-position frame only in the five modes Werner designs, and never stack it on a scaffold platform, which Cal/OSHA rules out for any ladder.

Over 50 years of supplying remodelers and homeowners lets us suggest which mode will carry most of your work, so the MT size fits the job rather than the catalog.

Werner MT Series – Type IAA Multi-Position Ladder

Werner MT Multi-Position Sizes, Ratings and Build

We list four Werner multi-position models, named for their reach height. The MT-13 reaches 13 feet, the MT-17 reaches 17, the Werner MT-22 multi-position ladder reaches 22 and the MT-26 reaches 26. Reach height already allows for the frame’s overlap, which avoids the guesswork of nominal sizing.

Every MT model is rated Type IAA at 375 pounds, the special duty class on the Cal/OSHA scale. In twin step mode, Werner rates each side for 300 pounds, which matters when two people work either side of a fixture. OSHA counts all workers, tools and materials on the ladder toward the rating at one time.

Werner fits each multi-position frame with slip-resistant shoes and flared ends for a wider stance, double-riveted steps and smooth, curved rails that are easier on the hands through a long day. Every change of mode relies on the frame’s moving joints, so they are the first thing to check at every setup. Because one Werner multi-position frame does several jobs, it also sees more setups per day than a single-purpose ladder, which makes those checks routine rather than occasional.

Our team checks the reach height and rating against the jobs you list, so each Werner MT on your quote is sized for the work.

Levelers, Platforms and Lock Checks for Werner Multi-Position Ladders

Werner lists its PK70-1 leg levelers as fitting the MT-13, MT-17, MT-22 and MT-26, which helps on sloped ground and on stairs that are not deep enough for the stairway setup alone. The Werner AC18MT platform adds a flat standing deck in extension mode and is rated for 300 pounds.

Before each climb on a Werner multi-position frame, confirm every joint and lock is fully engaged in the chosen position. Cal/OSHA asks that movable parts operate without binding or excess free play and that labels stay intact and readable, and OSHA bars moving or extending a ladder while anyone is on it. In extension or wall mode, set the base one foot out for every four feet of height and stand no higher than the fourth rung from the top. In step modes, stand no higher than two steps beneath the top.

Werner recommends retiring a damaged ladder rather than repairing it, so a bent rail or a joint that will not lock means replacement.

Saturday morning hours at both our locations let a contractor see how an MT converts before a Monday start.

Werner Multi-Position Ladders in a Lean Van Setup

Swapping several ladders for one Werner multi-position frame frees shelf and rack space in a van, which changes how the rest of the vehicle is fitted out. Other special designs sit together under Werner specialty ladders.

When you are rethinking the van as well, browse every manufacturer in our ladder and truck equipment brands hub.

Ordering Werner Multi-Position Ladders From Our Team

Five setups, a 375 pound rating and four reach heights from 13 to 26 feet let one multi-position frame stand in for a step, a stairway ladder and an extension. Send us the jobs and heights, or call 603-434-6911 or 508-754-3030, and we will quote Werner multi-position ladders with the levelers and platform to match, alongside the full Werner store range and our Werner brand page.

Werner Multi-position Ladders FAQs

How many positions do Werner multi-position ladders have?

Five. Twin step ladder, stairway step ladder, extension ladder, wall ladder and two scaffold bases.

What are Werner multi-position ladders rated for?

The MT series is rated Type IAA at 375 pounds, with 300 pounds on each side in twin step mode.

Which Werner MT sizes are available?

The MT-13, MT-17, MT-22 and MT-26, named for their reach heights in feet.

Which levelers fit Werner multi-position ladders?

Werner lists the PK70-1 leg levelers for the MT-13, MT-17, MT-22 and MT-26.

Can I add a platform to a Werner MT?

Yes. The AC18MT aluminum platform is made for MT ladders and extension ladders and is rated for 300 pounds.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder