Resources
Ladder Duty Ratings Explained, From Type III Light Duty to Type IAA Special Duty, With Load Math, Labels and More
The five ANSI classes and their working loads, what OSHA counts toward the load, per-side ratings on two-person models, and which Werner and Louisville series sit in each class.
Ladder duty ratings tell you the most weight a ladder is built to carry, and picking one too low for the climber and gear is a common way to overload it. Nation Wide Ladder helps you size the rating to the real load across step, twin, extension and multi-position models from Werner and Louisville, from Type II medium duty up to Type IAA special duty.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
The Five Ladder Duty Ratings and the Working Load Behind Each Class
Every portable ladder built to the ANSI A14 standards carries a duty rating, the working load it is designed to support. Cal/OSHA’s table lists five ratings. Type IAA is special duty at 375 pounds, Type IA is extra heavy duty at 300, Type I is heavy duty at 250, Type II is medium duty at 225 and Type III is light duty at 200. The standard depends on the rail material, with ANSI A14.1 for wood, A14.2 for portable metal and A14.5 for reinforced plastic, which covers fiberglass.
The ratings in the Werner and Louisville ranges we carry start at Type II and run to Type IAA, so Type III light duty is not part of our ladder lineup. Type II and Type I suit homeowners and lighter trade work, which is where the Werner D1200-2 and D1300-2 sit among our Werner D1200 and D1300 aluminum extension ladders. Contractors who climb daily with a belt and material tend to start at Type IA. Ladder ratings say nothing about height or rail material, so a 6 ft step ladder and a 40 ft extension can share a class.
Over 50 years of supplying homeowners and contractors has taught us to ask who climbs and what they carry before we suggest a ladder.
What OSHA Counts Toward a Ladder Load Before Duty Ratings Run Out
OSHA defines the maximum intended load as the total of all employees, equipment, tools, materials, transmitted loads and other loads on a ladder at any one time, and 1926.1053 bars loading a ladder beyond that load or the manufacturer’s rated capacity. Clothing, a full tool belt, a box of fittings and a bundle on the shoulder all count, so a climber who weighs well under 300 pounds can still pass a Type IA rating once the gear is added.
The rating is backed by testing. OSHA requires a portable ladder to sustain at least four times its maximum intended load, or 3.3 times for extra heavy duty Type IA metal or plastic ladders, with leaning ladders tested at 75.5 degrees. That margin exists for the climb, not for loading past the label.
Two-person ladders are the exception to one climber per ladder, which Cal/OSHA allows only on ladders designed for it, such as double-sided models. Werner rates its T6200 twin step ladders at 300 pounds on each side, and its MT multi-position ladders at 300 pounds per side in twin step mode.
Our team adds up each climber’s weight, tools and material with you, then checks that each ladder on the quote is rated for it.
Werner and Louisville Ladder Series Grouped by Duty Ratings
Each of these ladder ratings has options from both makers in our range. At Type II, Werner offers the D1200-2 aluminum extension and Louisville the AE4200. Type I covers the Werner D1300-2, the Louisville AE3200 and the AS2100 painter’s step. Type IA is the broad middle, with the Werner 6200 and T6200 step ladders, D6200-2 and D1500-2 extensions, and Louisville’s FS1500, FM1500 and FE3200. Type IAA brings the Werner 7300, D7100-2, Aerolite and MT series, with Louisville’s FS1300HD, FM1400HD and FXS1400HD. The Werner and Louisville brand pages show how far each range reaches.
Some series change ratings with size. Werner’s D500-2 aluminum extension is Type IAA from 20 to 32 ft and Type IA from 36 ft, so check the rating at the exact length. A higher ladder rating usually means heavier construction, which our Werner step ladders and Werner extension ladders show series by series.
At our Windham NH and Worcester MA showrooms we can set a Type I and a Type IAA ladder side by side so you can feel the difference in build.
Keeping Ladder Duty Ratings Valid Through Inspection and Retirement
A rating describes the ladder as it was built. OSHA wants portable ladders inspected by a competent person periodically and after anything that could affect safe use, and a ladder with broken rungs, split rails or corroded parts must be marked or tagged “Do Not Use” and withdrawn from service. Any repair has to restore the ladder to its original design criteria. Werner does not recommend repairing damaged ladders, and Cal/OSHA says a ladder exposed to fire or strong chemicals should be discarded. Fiberglass ladder rails also need a look for deformation from heat, chemicals or weather, which Cal/OSHA lists for reinforced plastic ladders, since a deformed rail no longer matches the ladder that was tested.
Lighter ratings have their place, too. Louisville’s AS2100 is Type I at 250 pounds and its AS3000 is Type IA at 300, both covered in our Louisville aluminum step ladders, so a painter can stay light without falling short of the load.
When a ladder fails inspection late in the week, both of our locations open on Saturday mornings to replace it with a ladder rated for the load.
How Ladder Duty Classes Fit a Crew’s Wider Kit
A ladder rating is only one load figure on a truck. Fall protection, racks and staging each carry their own capacities, and choosing them together keeps the numbers in step for the whole crew.
For racks, staging and safety gear rated for the same crews, look through our ladder and truck equipment brands hub.
Ordering With the Right Ladder Duty Ratings
The right class comes from the heaviest climber plus every tool and material they take up. Send us that load along with the heights you need, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote ladders with ladder duty ratings to match, delivered by our own trucks across New England.
Ladder Duty Ratings FAQs
What are the five ladder duty ratings?
Cal/OSHA lists Type IAA special duty at 375 pounds, Type IA extra heavy duty at 300, Type I heavy duty at 250, Type II medium duty at 225 and Type III light duty at 200.
Does a ladder duty rating include tools?
Yes. OSHA's maximum intended load is the total of the workers, equipment, tools, materials and other loads on the ladder at one time.
Which duty ratings do you carry?
The Werner and Louisville series we list run from Type II at 225 pounds to Type IAA at 375 pounds.
How are duty ratings applied on a twin step ladder?
Werner rates its T6200 twin step at 300 pounds on each side. Cal/OSHA allows more than one person only on ladders designed for it.
Can a ladder change duty rating with length?
Some series do. Werner's D500-2 aluminum extension is Type IAA from 20 to 32 ft and Type IA from 36 ft.
What testing backs ladder duty ratings?
OSHA requires a portable ladder to sustain at least four times its maximum intended load, or 3.3 times for extra heavy duty Type IA metal or plastic ladders.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









