Resources
Manhole and Single Ladders for Vaults, Pits, Landings and Scaffold Access in Aluminum, Fiberglass and More
Fixed-length straight ladders and narrow vault ladders compared, rail widths and rim guards, Type IA and IAA ratings, OSHA landing and traffic rules, and sizing by depth or landing height.
Manhole and single ladders handle the jobs where one fixed length is enough, from a landing, pit or scaffold to a narrow utility vault, and the challenge is that with no fly section the length has to be right before the ladder reaches the site. Nation Wide Ladder carries Werner and Louisville single models in aluminum and fiberglass plus manhole models from both makers, and our team helps you size each one by depth or landing height, rail material and duty rating.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
What Separates Manhole and Single Ladders From Extension Models
Cal/OSHA defines a single ladder as a portable ladder of one section that does not support itself, fixed in length and sized by the overall length of its rail, and it caps single ladders at 30 feet. With no fly, rope or rung locks, a fixed-length ladder has fewer parts to check, which suits scaffold access, pits, mezzanines and any landing that comes up at the same height again and again. The base of a separable extension ladder, such as the Werner D6200-2, can also serve as a single ladder.
A manhole ladder is a single ladder built for a narrow opening. The Werner M7100-1 measures 12.38 inches rail to rail and the Louisville FE8900 about 14 inches, both above the 11 1/2 inch minimum OSHA sets between the rails of a portable ladder. Each guards its rails at the manhole rim with 3 foot plastic protectors, and Louisville gives the FE8900 boots that turn through 180 degrees so it works from either side. Our Werner manhole ladders range sets out the M7100-1 in detail.
Over 50 years of supplying contractors and utility crews lets us suggest a manhole or single ladder length that serves more than one crew on a shared site.
Single Ladders by Rail Material, Length and Duty Rating
Aluminum keeps weight down where power is not a concern. Louisville’s AE2100 is rated Type IA for 300 pounds, runs from 8 to 20 feet and weighs 33 pounds at 16 feet, while the Werner D500-1 carries Type IAA at 375 pounds. Louisville marks the AE2100 as unsafe around electricity, so it belongs on sites away from live equipment.
Fiberglass is the material for electrical exposure, since OSHA requires nonconductive side rails wherever the worker or ladder could contact exposed energized equipment. The Werner D6200-1 is Type IA at 300 pounds with 1.63 inch D-rungs from 8 to 20 feet, and the Louisville FE3100 is Type IA in 8, 10, 12 and 16 feet, weighing 36 pounds at 16 feet, and Louisville lists its stabilizer and leveler accessories for the FE3100 in our Louisville ladder accessories range. Louisville puts the maximum reach of its 16 foot FE3116 at 18 feet 10 inches for a climber of 5 feet 7 inches reaching 12 inches overhead. Compare them in our Werner single ladders and Louisville single and manhole ranges, or see the Werner D6200 extension ladders for a base that doubles as one.
Free in-person consultations at our Windham and Worcester showrooms let you compare aluminum and fiberglass rails side by side before you order a set.
Sizing Manhole and Single Ladders for Landings, Pits and Vault Depths
With no extension to adjust, length is settled at the order. When the ladder gives access to an upper landing, OSHA requires the side rails to extend at least 3 feet above it, or the top must be secured to a rigid support with a grab rail provided, a common answer at a pit or manhole. Set the foot about a quarter of the working length out from the support. Werner offers the M7100-1 in 8, 10, 12 and 16 feet, rated Type IAA at 375 pounds, and Louisville offers the fiberglass FE8900 from 8 to 16 feet, also Type IAA, with the 10 foot FE8910 weighing 21 pounds.
Street and vault work adds rules. OSHA requires a ladder set where traffic could displace it to be secured or barricaded, and it bars carrying any object that could make a climber lose balance, so tools and meters are better lowered into the manhole on a line. In a manhole or vault with exposed energized parts, OSHA 1910.333 calls for protective shields, barriers or insulating materials, and a fiberglass manhole model meets the nonconductive rail rule. Follow the site’s own entry procedures for deep or confined spaces.
Our regular weekly deliveries from New Hampshire to Maine bring manhole and single models to utility and municipal crews there on a set schedule.
Manhole and Single Ladders as Part of a Utility Vehicle Setup
A manhole or straight ladder is often the one piece of access gear that stays fixed while everything else moves. Utility crews keep a manhole ladder with their vault entry and retrieval gear, and a long straight ladder needs a rack that supports it in transit, since Cal/OSHA warns that vibration and bumping can damage a ladder on the road. Deep descents may also call for a harness and lifeline from our {a(‘werner/retractables-lifelines/self-retracting-lifelines’, ‘Werner self-retracting lifelines’)} range.
When the setup also needs racks or fall protection from other makers, take a look across our ladder and truck equipment brands hub.
Quotes on Manhole and Single Ladders by Length and Rating
Fixed length, narrow width and the right rail material set manhole and single ladders apart, and measuring the landing or vault before ordering is what makes them work. Send us the heights and depths as a list, or call 603-434-6911 or 508-754-3030, and we will quote manhole and single ladders to match.
Manhole and Single Ladders FAQs
What is the difference between manhole and single ladders?
Both are fixed-length, one-section designs. A manhole ladder is narrower, with rail guards where it rests on the rim of the opening.
How long can a single ladder be?
Cal/OSHA caps single ladders at 30 feet, measured along the side rail.
How wide is a manhole ladder?
The Werner M7100-1 measures 12.38 inches rail to rail and the Louisville FE8900 about 14 inches. OSHA sets 11 1/2 inches as the minimum for portable ladders.
Which manhole and single ladders suit electrical work?
The fiberglass models, including the Werner D6200-1, the Louisville FE3100 and the FE8900 manhole model, since OSHA requires nonconductive rails near exposed energized equipment.
What if a single ladder cannot extend 3 feet past the landing?
OSHA allows the top to be secured to a rigid support that will not deflect, with a grab rail provided for getting on and off.
What rating do the manhole models carry?
The Werner M7100-1 and the Louisville FE8900 are both rated Type IAA for 375 pounds.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.







