Scaffolding
Scaffold Guardrails With Posts, Rails, Toeboards and Interside Panels for Frame Towers and More
Corner and line posts with threaded studs, rails from 30 inches to 10 feet, galvanized toeboards, walk-thru panels, OSHA toprail heights and loads, and roof edge rails filed in the same store category.
Fitting scaffold guardrails is the step that turns a planked scaffold tower into a platform people can work on, and OSHA wants it done before anyone beyond the erection crew steps on. Nation Wide Ladder lists the post and rail sets contractors order most for scaffold towers and sizes them to your bays, covering guardrail posts, guard rails in six lengths, steel toeboards, interside panels for walk-thru and cross braced sides, and the Acro and Tie Down systems built for roof edges.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Posts, Rails and Toeboards That Make Up Scaffold Guardrails
Guardrails on a frame scaffold are built from three parts. The NWL NWGRP guard rail posts serve as corner or line posts, each with one threaded stud at the top and two threaded midrail studs, in versions for light duty and mason style scaffold frames. The NWL NWGR guard rails then span post to post in 30 inch, 4, 5, 7, 8 and 10 foot lengths, so rail length follows the bay or the end of the tower.
The NWL NWTB toeboards close the gap at deck level. Each one uses a 1 1/4 by 4 inch galvanized steel channel to enclose the platform of a single scaffold tower, at 6 inches high in 30 inch, 5 foot and 7 foot lengths. The 7 and 5 foot pieces line up with the 7 foot cross braces and 5 foot wide mason frames we list, and the 30 inch pieces suit narrower frames. Light duty and mason posts are separate items, so the frame grade decides which scaffold guardrails go on the quote.
Give us the frame grade and number of bays, and our team will match posts, rails and toeboards to every side of each tower.
Toprail Heights, Midrails and Load Ratings OSHA Sets for Scaffold Guardrails
OSHA 29 CFR 1926.451(g) sets the rules for scaffold guardrails. Anyone on a scaffold more than 10 feet above a lower level needs fall protection, and guardrails go along all open sides and ends of the platform. On supported scaffolds made or placed in service after January 1, 2000, the top edge of the toprail sits between 38 and 45 inches above the deck. Midrails go roughly halfway between the toprail and the scaffold platform, and intermediate members such as balusters may be no more than 19 inches apart.
Strength is specified too. On a frame scaffold, as on most others, the toprail has to withstand at least 200 pounds applied downward or outward at any point without failure, and must not sag under that load lower than the required height, while midrails take at least 150 pounds. Where a scaffold uses crossbracing, OSHA accepts the braces as a midrail when they cross between 20 and 30 inches above the deck, or as a toprail when they cross between 38 and 48 inches, provided the brace ends at each upright are no more than 48 inches apart. Toeboards, where used, must withstand 50 pounds, stand at least 3.5 inches tall and sit at the outer edge with no more than 1/4 inch of clearance over the deck.
Free in-person consultations at our Windham, NH and Worcester, MA showrooms let you go through toprail heights and post spacing with our team before the order.
Interside Panels, End Guards and Roof Edge Scaffold Guardrails
Some sides of a scaffold need more than a post and rail. The NWISGR 7 foot interside guard rail panel guards the cross brace side of a tower’s work platform, and the NWIEWGR panel hooks onto walk-thru frames as an end guardrail to stop workers walking off, with a hole for a toggle pin to lock it to the frame. Both sit in our accessories range and let a crew guard a run of towers without a full post set on every side.
The same store category lists guardrails built for roof edges and building walls rather than towers. The Acro 48 inch bracket creates a 48 inch wide walkway on buildings up to five stories, a powder coated steel frame whose guard railings mount at any working height. The Tie Down 70758 universal guardrail is a 10 foot safety yellow rail engineered to fit over 95 percent of competitor bases, and its 71762 kit covers 110 linear feet on roofs up to a 2/12 pitch. Those systems have their own pages, Acro guardrail systems, Tie Down and our roof guardrails overview.
Our own trucks deliver door to door across New England, with weekly runs from New Hampshire to Maine, so a full set of posts, rails and toeboards reaches the tower as one load.
Scaffold Guardrails Planned With Frames and Planks
Guardrails go on last but are planned first, since post type follows the frame grade and rail length follows the bay. Ordering them in the same quote as the frames, braces and planks keeps a finished scaffold from waiting on rails. Fall arrest gear for erectors and for anyone working outside the rails comes from a separate group of makers.
Compare those makers and the rest of our range in the ladder and truck equipment brands hub.
Scaffold Guardrails Sized and Quoted for Your Towers
Backed by more than 50 years supplying contractors, Nation Wide Ladder quotes scaffold guardrails as complete sets of posts, rails and toeboards for each tower, delivered across New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine. Our scaffolding overview shows how guardrails fit with frames, planks and access.
Scaffold Guardrails FAQs
How high must scaffold guardrails be?
On supported scaffolds placed in service after January 1, 2000, OSHA puts the top edge of the toprail between 38 and 45 inches above the platform.
When are scaffold guardrails required?
OSHA requires fall protection for anyone more than 10 feet above a lower level, with guardrails installed before the scaffold is released for use beyond the erection crew.
What lengths do NWL scaffold guardrails come in?
30 inches and 4, 5, 7, 8 and 10 feet, paired with NWGRP posts in light duty or mason style versions.
Can cross braces count as scaffold guardrails?
OSHA accepts crossbracing as a midrail where the braces cross 20 to 30 inches above the deck, or as a toprail at 38 to 48 inches, with brace ends no more than 48 inches apart.
How tall are scaffold toeboards?
OSHA asks for at least 3.5 inches, and our NWTB toeboards stand 6 inches high in galvanized steel channel.
Does the Tie Down guardrail fit other makers' bases?
Tie Down engineered the 70758 rail to fit over 95 percent of competitor bases, with a multi-pin slot that adjusts to other uprights.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.









