Scaffolding

Scaffold Planks in Aluminum Hook-On, Plywood and Laminated Wood Designs for Frame Towers and More

Hook-on aluminum decks rated per square foot, Werner all aluminum decks with a 250 pound limit, anti-skid plywood staging planks, 16 foot laminated boards and the OSHA rules on gaps, overlap and overhang.

Picking scaffold planks means matching the deck to the frame, the load and the surface the crew will stand on. Nation Wide Ladder lists the hook-on and laminated scaffold decks contractors order most and checks each one against your frames, covering aluminum hook-on decks and fillers, Werner 5500 series all aluminum decks, round hook plywood staging boards in plain and anti-skid finishes, and laminated wood planks.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Aluminum Hook-On Scaffold Planks and Decks for Frame Towers

Hook-on decks carry hooks at each end that seat over the frame, so the deck locks onto the tower rather than resting loose. The NWAL aluminum hook-on deck is the light option among our scaffold planks, rated for 75 pounds per square foot, in a 5 foot NWAL05 and a 7 foot NWAL07, with the NWAL9.5x7FILL filler plank at 9.5 inches by 7 feet to close the gap beside a full-width deck. Light weight helps on a scaffold that gets planked and stripped at every move.

The Werner 5500 series all aluminum deck is built for steel scaffolding frames, 19 inches wide with perforated treads for slip resistance, and rated for exterior and interior use. Werner gives it a maximum load of 250 pounds including the person and materials, in the 7 foot 5507-19, 8 foot 5508-19 and 10 foot 5510-19. The two aluminum lines state their ratings differently, one per square foot and one as a total, so compare each against what will actually sit on the deck.

Our team checks fitment between the deck hooks and your frames before the order goes in, so the scaffold planks seat on the tower you already own.

NWAL – Aluminum Hook On Deck

Plywood Staging and Laminated Wood Scaffold Planks Compared

Plywood staging decks combine a wood surface with steel hooks. The NWL NWPD4007 carries an anti-skid coating on its plywood, while the NWPD5007 has a plain plywood deck, and both measure 7 feet long by 19 inches wide with a round hook, a 75 pound per square foot rating and a square hook option. Hook style has to suit the frame the plank sits on, so we confirm round or square against your scaffold planks order. The coated deck gives more grip underfoot when the surface is wet or dusty.

Laminated scaffold boards cover the longer span. The NWWLP-16 laminated OSHA plank is 16 feet long and 9.5 inches wide, built from thin layers of Norwegian spruce veneer to even out the knots and grain variation of solid wood. Each board is mechanically proof-load tested at the plant, made under an ISO 9001 quality system from PEFC certified forest material and audited by an independent inspection agency, and the listing states that it exceeds OSHA, CSA and ANSI standards. Boards for ladder jacks and pump jacks sit in our separate staging planks range.

Ask for a quote with your plank count and lengths at 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, and we price the mix of wood and aluminum.

NWWLP-16 – Laminated OSHA Planks

Laying Scaffold Planks to OSHA Gap, Overlap and Overhang Limits

OSHA’s platform rules in 29 CFR 1926.451(b) decide how scaffold planks go down. Each working level has to be fully planked or decked between the front uprights and the guardrail supports, with no more than 1 inch between adjacent units or between the platform and the uprights. Most supported scaffold platforms must be at least 18 inches wide, which a pair of 9.5 inch laminated boards or a single 19 inch deck meets, while pump jack and ladder jack platforms may be as narrow as 12 inches.

Ends need support. Unless a plank is cleated or held by hooks, each end extends at least 6 inches over the centerline of its support, and a platform 10 feet or shorter overhangs by no more than 12 inches, or 18 inches on longer platforms, unless it is designed or guarded for it. Where boards overlap to make a long walkway, the overlap sits only over supports and runs at least 12 inches unless they are nailed or restrained. Wood scaffold platforms cannot be covered with opaque finishes, though edges may be marked and the faces treated with preservative, fire-retardant or slip-resistant coatings that leave the wood visible.

Our own trucks deliver door to door across New England, so 16 foot laminated boards and 10 foot decks arrive at the job in one drop.

Werner 5500 Series – All Aluminum Deck for Scaffolding Frames

Scaffold Planks Within a Complete Frame Tower

Decking is the working layer of a scaffold tower, laid once the frames, cross braces and pins are set and before guardrails go on. The 7 foot decks we list line up with the 7 foot cross braces on our scaffold frames, and toeboards and rails then fix to the posts at the deck edge to complete the scaffold.

To compare the makers behind every part of the kit, open our ladder and truck equipment brands hub.

NWL NWPD4007 – Anti Skid Coated Plywood Staging Plank

Scaffold Planks Quoted and Delivered for Your Towers

With over 50 years serving contractors and homeowners, Nation Wide Ladder quotes scaffold planks by frame type, bay length and load, and delivers them across New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine. Compare scaffold decks with frames, guardrails and pump jacks in our scaffolding overview.

Scaffold Planks FAQs

Which scaffold planks hook onto frames?

The NWAL aluminum hook-on decks, the Werner 5500 series decks and the NWPD plywood staging decks are filed as hook-on scaffold planking, while the NWWLP-16 is a laminated wood plank listed separately.

How much weight do aluminum scaffold planks hold?

The NWAL hook-on deck is rated at 75 pounds per square foot, and Werner rates its 5500 series deck at 250 pounds total, person and materials included.

Why are laminated scaffold planks made from veneer?

Thin layers of veneer even out knots and other natural inconsistencies in wood, and each NWWLP-16 board is proof-load tested at the plant.

How far must scaffold planks extend past their supports?

At least 6 inches past the centerline unless cleated or hooked, and no more than 12 inches of overhang on platforms of 10 feet or less.

Can wood scaffold planks be painted?

OSHA bars opaque finishes on wood platforms, though edges can be marked and faces coated with preservative, fire-retardant or slip-resistant finishes that leave the wood visible.

Do plywood scaffold planks come with square hooks?

The NWPD4007 and NWPD5007 are listed with round hooks, with a square hook option for frames that need it.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder