Brand spotlight

Tie Down Ladder Stabilizers, From Corner and Stand-Off Models to Universal Guardrails, UCC Bases and More

Lightweight aluminum stand-offs that hold an extension ladder clear of gutters and outside corners, plus a safety yellow passive guardrail system for low-slope roof edges.

Tie Down ladder stabilizers hold an extension ladder away from gutters, siding and outside corners so you can work steadily at the eave, and Nation Wide Ladder pairs them with the edge protection the same roofing crews need. The Tie Down range we list includes the 48586 corner stabilizer, the 48589 stand-off stabilizer, the 70758 10 ft yellow guardrail and the 71762 stack rack kit with UCC bases.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Corner and Stand-Off Tie Down Ladder Stabilizers Compared

Both Tie Down ladder stabilizers mount near the top of an extension ladder and move the rails off the building, but they solve different problems. The Tie Down 48589 stand-off stabilizer gives an 18.5 inch stand-off, enough to bridge a gutter so you can clean or repair it, reach downspouts and work under soffits without resting on the trough. It is aluminum, weighs about 12 pounds and is meant to spare roofing, gutters, siding and paint from rail marks.

The Tie Down 48586 corner stabilizer is the lighter of the two at about 5 pounds. Tie Down designed it to sit on an outside corner of a building, giving secure footing where a flat stabilizer has nothing to bear on, and on a flat wall it holds the rails about 18 inches out. It ships with rubber caps and mounting hardware.

If most of your work is gutter cleaning and fascia, the wider 48589 is usually the better match, while siding and trim crews who climb at corners get more from the 48586. Plenty of Tie Down users keep both stabilizers on the truck.

Tell us which extension ladders your crew runs, and our team will confirm the Tie Down stabilizer that mounts to them before you order.

Tie Down 48589 – 18.5 in. Stand-Off Extension Ladder Stabilizer

Tie Down Universal Guardrails Beside Ladder Stabilizers on Low-Slope Roofs

Stabilizers make the climb steadier, and the Tie Down guardrail line protects the edge once you are up. The Tie Down 70758 Universal Guardrail is a 10 ft rail finished in safety yellow powder coat so it stands out on a busy site. Tie Down made it to drop into more than 95 percent of competitor bases, with a multi-pin slot that adjusts it to other makers’ uprights, so a crew can keep using bases it already owns.

The 71762 stack rack kit turns that rail into a complete run. It contains 11 guardrails and 12 Universal Compression Clamp bases for 110 linear feet of edge. The bases tighten with an impact gun, accept 1.66 and 1.90 inch OD tubes and stack three high for hauling and storage. Tie Down gives approximate weights of 33 pounds per guardrail and 58 pounds per base, rates the system for roofs up to a 2/12 pitch and states that the kit complies with OSHA standards. Grommeted padding is optional. Because guardrail is passive protection, workers move along the edge without harnesses or lanyards.

We deliver guardrail kits door to door across New England on our own trucks, which matters when a 110 foot run arrives as a stack of rails and bases.

Tie Down 70758 – 10 ft. Yellow Guardrail

Tie Down Ladder Stabilizers Within a Roofing Crew’s Kit

A stabilizer and a guardrail run cover the climb and the edge, while the rest of a roofing setup usually includes the extension ladders themselves, roof brackets, hoists and a truck rack to move it all. Choosing those pieces together keeps the access plan consistent from the ground to the ridge.

To weigh the ladder, rack and fall protection makers that round out that kit, open our ladder and truck equipment brands hub.

Tie Down 48586 – Adjustable Safety Corner Ladder Stabilizer

Setting Up Tie Down Ladder Stabilizers and Guardrail for a Roof Job

Plan the access point first. Pick the spot where the ladder meets the eave, then choose the stand-off model if a gutter runs there or the corner model if the cleanest landing is an outside corner. Either Tie Down stabilizer bolts on with its supplied hardware, and its rubber caps are what contact the building, so check them for wear before each climb. Fit the stabilizers on the ground rather than at height, then raise the fly section and confirm both arms bear evenly before anyone starts up.

Next, measure the roof edge for guardrail. One 71762 kit covers 110 linear feet with one more base than rails, so a longer perimeter needs a second kit or extra 70758 rails and bases. Confirm the roof pitch sits at or under 2/12, and if the crew already owns bases from another maker, check them against the multi-pin slot before buying new ones.

See both Tie Down stabilizers at our Windham, NH or Worcester, MA showroom, where a free consultation helps you plan ladder access and the guardrail run together.

Tie Down 71762 – Universal Guardrail Stack Rack Kit with UCC Base

Order Tie Down Ladder Stabilizers and Guardrail From Us

Having served homeowners and contractors for over 50 years, we quote Tie Down ladder stabilizers and guardrail kits at 603-434-6911 in NH or 508-754-3030 in MA, through our quote request page, or from our Tie Down store.

Tie Down Ladder Stabilizers FAQs

How far do Tie Down ladder stabilizers hold a ladder off the wall?

The 48589 gives an 18.5 inch stand-off, and the 48586 corner model holds the ladder about 18 inches out on a flat surface.

Can a Tie Down stabilizer sit on a building corner?

Yes. The 48586 is made to bear on an outside corner, where a flat stand-off has no surface to rest against.

What comes in the Tie Down 71762 guardrail kit?

Eleven 10 ft guardrails and twelve UCC bases, covering 110 linear feet of roof edge.

Will Tie Down guardrails fit bases I already own?

Tie Down says the Universal Guardrail fits more than 95 percent of competitor bases through its multi-pin slot.

What roof pitch is the Tie Down guardrail system rated for?

Tie Down rates the stack rack kit for roofs with pitches up to 2/12.

Need help choosing the right Tie Down equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder