Ladders

Fiberglass Ladders in Single-Sided, Twin, Cross-Step, Podium, Platform, Leaning and Tripod Designs and More

Nonconductive fiberglass ladders from Werner and Louisville, Type IA and Type IAA ratings, step heights from 2 to 16 feet, twin and cross-step frames, guarded podium decks and a tripod for uneven ground.

Choosing fiberglass ladders for a crew starts with the wiring on site, then moves to the design and duty rating each climber needs, and the range runs wider than most buyers expect. Nation Wide Ladder narrows it to the Werner and Louisville fiberglass models contractors order most and matches each one to the work, covering single-sided step ladders, twin and cross-step frames, podium and platform ladders, leaning ladders, a tripod and a dual purpose model, with fiberglass extension ladders for exterior climbs.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Fiberglass Ladders Belong Wherever Wiring Runs Close

Rail material is the first question on any job with live circuits nearby. OSHA 1926.1053 calls for nonconductive side rails where the climber or the ladder could contact exposed energized equipment, and Louisville labels its fiberglass ladders safe around electricity while marking its aluminum ladders unsafe. Cal/OSHA adds that water can make a ladder conductive, so fiberglass lowers the risk near power without ever making live electrical work safe. Electricians, HVAC techs, low-voltage installers and facility teams therefore treat fiberglass ladders as standard kit, and plenty of general contractors follow because they never know what sits behind a ceiling tile.

Fiberglass does add some weight. Louisville lists a 6 foot FS1500 at 20 pounds and a 6 foot FS1306HD at 22, against 15 pounds for its aluminum AS2100 at the same height, so painters working well away from wiring often carry our aluminum ladders instead. Every design on our wider list of ladder best sellers comes in fiberglass for crews who need it, from a 2 foot step to a 16 foot twin.

Our team asks what wiring, panels and fixtures sit near the work before suggesting a fiberglass model, so the rails on your quote suit the site.

Louisville FS1500 Series – Type IA Fiberglass Step Ladder

Single-Sided and Twin Fiberglass Ladders From Werner and Louisville by Duty Rating

Five single-sided fiberglass step series cover most crews. The Werner 6200 is Type IA at 300 pounds, with a top that holds Werner job buckets, and the Werner 7300 moves to Type IAA at 375 pounds in 3 to 12 foot sizes. Louisville offers the Type IAA FS1300HD with a metal top, the Type IA FS1500 with tool slots and a magnet from 2 to 12 feet, and the Type IA L-3016 for lighter use. For two climbers, the Werner T6200 twin carries 300 pounds on each side from 2 to 12 feet, the Louisville FM1500 is Type IA to 12 feet and the FM1400HD is Type IAA to 16 feet. Louisville’s FXS1400HD and FXS1500 Cross-Step frames fold to lean on a wall or pole. Our Louisville fiberglass step ladders section sets out that maker’s singles in more depth.

Height comes next. Louisville gives a 6 foot model a 45 inch top standing height and about 10 feet 5 inches of reach for an average adult. Compare 6 ft fiberglass ladders and 8 ft fiberglass ladders for standard rooms, then 10 ft fiberglass ladders and 12 ft fiberglass ladders for high ceilings, signs and racking.

Our own ladder classes add a build-quality view, placing the Werner 6200 and 7300 in Master, the FS1500 in Journeyman and the L-3016 in Apprentice.

Louisville FXS1400HD Series – Type IAA Fiberglass Cross-Step Ladder

Podium, Platform, Leaning and Tripod Fiberglass Ladders for Longer Stints at Height

Some tasks keep a climber at one height for an hour, and a narrow step tread gets tiring fast. The Werner PD6200 podium is Type IA from 2 to 12 feet with a guarded deck, and each size reaches as far as a standard step two feet taller, so a PD6206 covers 8 foot step work. The Werner PD7300-4C rolls on four casters at Type IAA, though OSHA requires the climber to come down before it moves. Louisville’s FXP1700 Pinnacle Pro platform is Type IA from 2 to 12 feet with a 30 inch handrail at tool belt height, and the Type IAA FCP1400 Cross Pinnacle tips forward to rest a V-shaped top on walls, poles and corners.

Three more fiberglass ladders handle awkward ground. The Werner L6200 opens as a normal step and folds to lean against a flat wall, an inside corner, a pole or a stud, the Louisville FT1500 tripod stands on three legs in 6, 8 and 10 foot sizes for uneven ground and tight access, and the Werner DP6200 flips from step to extension at Type IA. Exterior climbs belong to our fiberglass extension ladders.

At our Windham NH and Worcester MA showrooms you can stand on a podium deck or try a leaning setup during a free consultation before you order.

Werner PD6200 Series – Type IA Fiberglass Podium Ladders

Fiberglass Ladders Within a Crew’s Wider Equipment Mix

Interior crews rarely run on one ladder type. A fiberglass step handles the ceiling, a podium covers long stints at one height, an extension ladder rides on the rack for the roofline, and van shelving keeps the set organized between stops, often from several makers at once.

When you are planning racks, shelving or storage around those ladders, see each manufacturer side by side in our ladder and truck equipment brands hub.

Louisville FXS1500 Series – Type IA Fiberglass Cross-Step Ladder

Ordering Fiberglass Ladders by Design, Height and Rating

Send us the designs, heights and ratings you need, or call 603-434-6911 in Windham or 508-754-3030 in Worcester, and Nation Wide Ladder will quote fiberglass ladders with more than 50 years of serving contractors and homeowners behind the advice. Our own trucks deliver to New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine, and we ship anywhere in the US.

Fiberglass Ladders FAQs

Why do electricians choose fiberglass ladders?

OSHA calls for nonconductive side rails where a climber or ladder could contact exposed energized equipment, and Louisville labels its fiberglass models safe around electricity.

Which fiberglass ladders carry a Type IAA rating?

The Werner 7300 and PD7300-4C, plus the Louisville FS1300HD, FM1400HD twin, FXS1400HD Cross-Step and FCP1400 Cross Pinnacle, each rated for 375 pounds.

How much heavier are fiberglass ladders than aluminum?

A little. Louisville lists a 6 foot FS1500 at 20 pounds against 15 pounds for a 6 foot aluminum AS2100.

What is the tallest fiberglass step model you list?

The Louisville FM1400HD twin, rated Type IAA and listed up to 16 feet. Most single-sided fiberglass step series stop at 12 feet.

Can wet fiberglass ladders conduct electricity?

Yes. Cal/OSHA notes that water can make a ladder conductive, so fiberglass reduces risk near power but never makes live electrical work safe.

Which fiberglass ladders suit uneven ground?

The Louisville FT1500 tripod, which stands on three legs in 6, 8 and 10 foot sizes and suits uneven ground and limited access areas.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder