Ladders

Step Ladders in Single-Sided, Twin and Podium Designs, Fiberglass and Aluminum and More

Type I to Type IAA duty ratings, fiberglass rails for electrical work, aluminum for painting, twin and cross-step frames, top standing height and reach, and the Werner and Louisville step models crews order.

Choosing step ladders for a crew means balancing duty rating, rail material and a height that keeps every climber off the top step, and the range across two makers is wide enough to make that hard. Nation Wide Ladder narrows it to the Werner and Louisville step models contractors order most and sorts them with you, covering single-sided fiberglass step ladders, twin step and cross-step frames, the PD6200 podium and aluminum step designs for painting and general work.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Single-Sided, Twin and Cross Step Ladders and the Jobs Each Design Suits

Because a step ladder supports itself, it goes anywhere there is a floor, which is why electricians, painters, drywall crews and facility teams carry one on almost every job. The single-sided step design is the default, with treads on the front and bracing on the back. OSHA rules out climbing that rear bracing unless a ladder has steps on both sides, and a twin step frame is built exactly that way, with Louisville designing its twin ladders so two people can work one at once, one on each side.

The cross-step is a third design. Louisville’s patented Cross Step opens as an ordinary step ladder, then folds to rest a V-shaped top on a wall, a corner or a pole, with a bright green top and shoes that stand out on site. Podium step designs such as the Werner PD6200 trade the narrow top tread for a guarded deck, so the climber can stay at one height for longer. Rail material cuts across all four, since fiberglass ladders suit work near wiring and aluminum ladders suit painting and general jobs where weight matters more. Our ladder best sellers set these step designs beside extension, single and specialty models.

We also grade step designs by our own Apprentice, Journeyman and Master ladder classes, with the Werner 6200 and 7300 in Master, the Werner 6100 and Louisville FS1500 in Journeyman and the Louisville L-3016 in Apprentice.

Werner 6100 Series – Type IA Single Sided Step Ladder

Comparing Werner and Louisville Step Ladders by Duty Rating and Top Design

Four step ladders lead our list. The Werner 6200 carries Type IA and 300 pounds on a single-sided fiberglass frame, and its top holds Werner job buckets, with steel plates to keep magnetic tools in place. Louisville’s FS1500 sits at the same Type IA level with a slotted tool top and a magnet, weighing 20 pounds at 6 feet. For heavier loads the Werner 7300 is Type IAA, rated for 375 pounds, with internal spreaders under a heavy aluminum top, and the Louisville L-3016 covers occasional use at Type IA.

Around them sits the rest of the step range. The Werner 6100 is a Type IA step ladder with a HolsterTop, heavy-duty internal spreaders and oversized molded boots, in 4 to 12 foot sizes, and the Louisville FS1300HD adds a metal top at Type IAA. Among twin ladders, the Werner T6200 and Louisville FM1500 are Type IA and the Louisville FM1400HD is Type IAA up to 16 feet. Louisville’s FXS1400HD and FXS1500 cover the cross-step design at Type IAA and Type IA, and the aluminum AS1000 and AS3000 are Type IA, with the Type I AS2100 at 15 pounds for a 6 foot step. Both makers’ full lines live in our Werner step ladders and Louisville step ladders sections.

We keep Saturday morning hours at both locations, so a step ladder that fails a Friday inspection can be replaced before the Monday start.

Louisville FXS1400HD Series – Type IAA Fiberglass Cross-Step Ladder

Step Ladders Sized by Standing Height, Reach and Spreader Checks

Height decides more than the job list. Werner’s standing limit is two steps short of the top cap, and OSHA forbids using the top cap or top step as a step at all, so take the height you need to stand at and add those two steps. On a 6 foot Louisville model the top standing height is 45 inches and the reach about 10 feet 5 inches, measured for an adult of 5 feet 7 inches with arms raised a foot. If a climber keeps eyeing the top step, the step ladder is too short.

Load counts everything on the step frame at once. OSHA adds the climber, tools and materials together against the duty rating, and its test asks a self-supporting ladder to carry four times that load, a factor that drops to 3.3 for extra-heavy-duty Type IA metal or plastic designs. Every step frame also needs a metal spreader or lock holding its two sections apart, so confirm the spreaders lock fully before each climb, and retire a step ladder with a bent spreader or cracked rail.

At our two showrooms, in Windham NH and Worcester MA, your crew can open and climb each step model during a free in-person consultation before you order.

Louisville FXS1500 Series – Type IA Fiberglass Cross-Step Ladder

Step Ladders Inside a Mixed Interior Equipment Kit

Interior crews seldom run on step ladders alone. A fiberglass step handles the ceiling, a podium covers long stints at one height, an extension ladder waits on the van for the roofline, and van shelving or racks keep the whole set organized between jobs, often from several different makers.

If the van needs outfitting as well, you can weigh shelving, racks and storage from each maker in our ladder and truck equipment brands hub.

Werner PD6200 Series – Type IA Fiberglass Podium Ladders

Ordering Step Ladders for Crews and Homeowners

From one 6 foot model to a matched set for every van, Nation Wide Ladder quotes step ladders by series, height and rating, drawing on more than five decades of serving homeowners and contractors. Reach our Windham team at 603-434-6911 or our Worcester team at 508-754-3030, and our own trucks will bring the order to New Hampshire, Massachusetts, Maine, Vermont, Connecticut or Rhode Island, with shipping to the rest of the country.

Step Ladders FAQs

What separates single-sided step ladders from twin step models?

Single-sided models have treads on the front only, and OSHA bars climbing their rear bracing. A twin step frame has treads on both sides, so two people can work it at once.

Which step ladders carry a Type IAA rating?

The Werner 7300, Louisville FS1300HD, Louisville FM1400HD twin and Louisville FXS1400HD cross-step are each rated Type IAA for 375 pounds.

How high can I stand on a step ladder?

No higher than two steps short of the top cap, by Werner's guidance, and OSHA forbids standing on either the top cap or the highest step.

How do cross-step ladders work?

Louisville's patented Cross Step opens like an ordinary step ladder and folds to rest its V-shaped top on a wall, a corner or a pole.

Do aluminum step ladders still have a place on a crew?

Yes, for painting and general work away from electrical hazards. The Louisville AS2100 and AS3000 add a molded pail shelf, and a 6 foot AS2100 weighs 15 pounds.

What are your Apprentice, Journeyman and Master ladder classes?

Our own build-quality tiers. The Werner 6200 and 7300 sit in Master, the Werner 6100 and Louisville FS1500 in Journeyman and the Louisville L-3016 in Apprentice.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder