Extension Ladders
Aluminum Extension Ladders in Type II to IAA Ratings, Two and Three Section and 60 Foot Designs and More
Werner D1200-2 to D500-2 and Louisville AE1200 to AE4200 aluminum extension ladders, 225 to 375 pound ratings, I-beam rails and rung locks, and the 60 foot Werner 560-3 and Louisville AE1660.
Choosing aluminum extension ladders comes down to the duty rating each climber needs and a length the crew can carry, on sites where nobody works near live wiring. Nation Wide Ladder quotes the Werner D1200-2, D1300-2, D1500-2 and D500-2, the Louisville AE1200, AE2200, AE3200 and AE4200, and the three-section 60 foot Werner 560-3 and Louisville AE1660, and our team sets rating and length against the job.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Shop Aluminum Extension Ladders by Type
20 ft Aluminum Extension Ladders20 ft aluminum extension ladders from Werner and Louisville compared on weight, closed length, duty rating and the…
24 ft Aluminum Extension Ladders24 ft aluminum extension ladders from Werner and Louisville paired by load rating and weight for second-floor gutters,…
28 ft Aluminum Extension Ladders28 ft aluminum extension ladders from Werner and Louisville compared on rack fit, weight, roofing ratings and how…
32 ft Aluminum Extension Ladders32 ft aluminum extension ladders from Werner and Louisville compared on setup space, transport length, weight and the…
Where Aluminum Extension Ladders Suit Painters, Gutter and Siding Crews
An exterior painter or gutter crew can raise, walk and reset an extension ladder dozens of times on one house, and every pound counts by the afternoon. Louisville lists a 20 foot aluminum AE3220 at 32 pounds and an AE2220 at 37, against 42 for its fiberglass FE3220. Werner suggests aluminum for painting, household tasks, maintenance and quick jobs, adding that it resists denting, shattering, rust and corrosion and is designed and tested for extreme temperatures, which suits a ladder that lives outdoors on a rack. That makes aluminum extension ladders a strong fit for painters, gutter and window cleaners, siding crews and property managers.
Electricity sets the boundary. Werner states that aluminum is not for use around electrical hazards, Louisville marks each aluminum extension series unsafe around electricity, and OSHA requires nonconductive side rails where the climber or ladder could contact exposed energized equipment, including the service lines running to a building. Crews who take on that work also carry our fiberglass extension ladders, and both rail materials appear among our extension ladder best sellers.
Over 50 years of quoting ladders for homeowners and contractors has taught us to ask about overhead lines before suggesting an aluminum model.
Werner and Louisville Aluminum Extension Ladders Ranked by Duty Rating
Ratings climb in clear steps. The Werner D1200-2 is Type II at 225 pounds and the D1300-2 is Type I at 250, both medium duty in 16 to 40 foot sizes. The Werner D1500-2 moves to Type IA at 300 pounds with extra heavy duty I-beam rails and a rail-on-rail system that widens the fly, and the D500-2 carries Type IAA at 375 pounds from 20 to 32 feet, dropping to Type IA from 36 to 48 feet. Werner’s two-section aluminum series share 1.75 inch D-rungs, Alflo rung joints and spring-loaded rung locks, and the full set sits in our Werner aluminum extension ladders section.
Louisville runs a parallel ladder of ratings. The AE4200 is Type II at 225 pounds, the AE3200 is Type I at 250 and the lightest of the group, and the AE2200 and AE1200 are Type IA at 300, with Louisville building its 16 to 32 foot AE1200HD sizes at Type IAA. The AE1200 and AE2200 use a full I-beam rail and the AE3200 and AE4200 a modified I-beam, and our Louisville aluminum extension ladders page details the locks.
Saturday morning hours at both our locations let you compare these rails and rung locks in person before a week of exterior work.
Sizing Aluminum Extension Ladders From 20 to 32 Feet and Beyond to 60
Length changes the weight and the rating choice. At 24 feet Louisville lists the AE3224 at 38 pounds and the AE2224 at 42, and at 32 feet the AE3232 weighs 60 pounds and the AE2232 63, still lighter than the fiberglass equivalents. Overlap trims every size as well, since Louisville lists a 17 foot maximum extended length for its 20 foot models, and roof access needs rails reaching at least 3 feet past the edge. Compare 20 ft aluminum extension ladders for single-storey gutters, 24 ft aluminum extension ladders and 28 ft aluminum extension ladders for two-storey siding, and 32 ft aluminum extension ladders for taller walls.
Beyond 40 feet, two three-section models take over. The Werner 560-3 is a 60 foot Type I ladder raised with a double pulley, and its top fly lifts off as a straight ladder while the base and middle work as a 40 foot extension. Louisville’s AE1660 is also Type I, extends to 48 feet and weighs 169 pounds. On slopes, Werner lists PK80-2 levelers for the D500 and PK70-1 levelers for the D1300.
Our regular weekly deliveries from New Hampshire to Maine mean crews there can replace a damaged aluminum ladder without a long drive.
Aluminum Extension Ladders With Jacks, Stabilizers and Racks
Siding crews often pair two aluminum ladders with ladder jacks and a plank to stage along a wall, painters add a standoff stabilizer such as Louisville’s LP-2200-00, which holds the ladder 12 inches off the wall across a 45 inch span, and longer ladders need a truck or van rack sized to carry them.
For the racks, jacks and planks that complete the setup, browse each manufacturer in our ladder and truck equipment brands hub.
Quoting Aluminum Extension Ladders by Length, Load and Series
Send a list or call 603-434-6911 in Windham or 508-754-3030 in Worcester, and Nation Wide Ladder will quote aluminum extension ladders matched to each climber’s load. List the climbers and what each one carries, and our team will set the rating and length for each ladder on the order. Our own trucks deliver door to door to Rhode Island, Connecticut, Massachusetts, Vermont, New Hampshire and Maine, and we ship anywhere in the US.
Aluminum Extension Ladders FAQs
Which aluminum extension models carry 375 pounds?
The Werner D500-2 from 20 to 32 feet and Louisville's AE1200HD from 16 to 32 feet, both Type IAA. The 36 to 48 foot D500-2 sizes are Type IA at 300 pounds.
What are the lightest aluminum extension ladders you list?
The Louisville AE3200, rated Type I, which Louisville lists at 32 pounds for the 20 foot size and 38 pounds at 24 feet.
How do the 60 foot aluminum extension models differ?
The Werner 560-3 splits into a straight ladder and a 40 foot extension, while the Louisville AE1660 extends to 48 feet and weighs 169 pounds. Both are Type I.
Are aluminum extension ladders safe near power lines?
No. Werner and Louisville both mark aluminum as unsafe around electrical hazards, and OSHA calls for nonconductive rails near exposed energized equipment.
What duty ratings do aluminum extension ladders come in?
From Type II at 225 pounds (Werner D1200-2, Louisville AE4200) through Type I and Type IA up to Type IAA at 375 pounds.
Which levelers fit aluminum extension models?
Werner lists PK80-2 levelers for its D500 series and PK70-1 levelers for the D1300.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.





