Aluminum Extension Ladders

32 ft Aluminum Extension Ladders for Three-Storey Walls and High Gables, Up to the Final Type IAA Size and More

Base setback at a quarter of working length, closed lengths from 192 to 197.5 inches, weights from 54 to 74 pounds and the end of Type IAA ratings on 32 ft extension models.

Tall gables, sloped lots where the ground falls away and three-storey walls are the jobs that call for 32 ft aluminum extension ladders, and at this size setup space and raising the ladder take as much planning as the climb. Nation Wide Ladder quotes the Werner D1232-2, D1332-2, D1532-2 and D532-2 and the Louisville AE4232, AE3232 and AE2232, with the heavy-duty Louisville AE1200 series alongside, and our team works through base setback, closed length and weight, duty ratings from Type II to IAA and the electrical limit on metal rails before we quote.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Base Setback and Footing for a 32 ft Aluminum Ladder

OSHA 1926.1053 sets a leaning ladder so the distance from the top support to the foot is about one quarter of the working length. Louisville lists a 29 foot maximum extended length for its 32 ft models, so a 32 run near full extension needs a clear, level patch of ground well out from the wall, and on a narrow side yard or beside a fence that space can decide the job before the height does, so measure it before choosing among 32 ft extension ladders for a tight lot. OSHA also limits ladders to stable, level surfaces unless secured, and asks for the rails to run at least 3 feet past an upper landing, or for the top to be tied to a rigid support where the length cannot allow that.

For footing, Werner fits the D1232-2 and D1532-2 with Shu-Lok shoes and spur plates and the D532-2 with a heavy duty, self-aligning shoe, while the Louisville AE4232 uses a steel swivel shoe behind a metal shield. Louisville lists 31 feet 5 inches of maximum reach at 32 ft and Werner averages 31 feet, both for a 5 foot 7 inch climber with a 12 inch reach.

Our team checks the wall height and the space at its base with you, so the 32 ft model on your quote fits both.

Louisville AE1200 Series – Type IA Aluminum Extension Ladder

Werner and Louisville 32 ft Aluminum Ratings, Including the Last Type IAA Size

At 32 ft, Type IAA reaches its limit in these lines. Werner rates the D532-2 Type IAA for 375 pounds at 74 pounds with a 3/8 inch rope, and our store listing shows the D500-2 series moving to a 300 pound rating from 36 feet up. Louisville’s catalog lists the AE1232HD at Type IAA and 71 pounds and its 40 foot AE1240 at Type IA, so a climber who needs 375 pounds tops out at 32 with either maker. Since our store page shows the AE1200 series at Type IA, we check that rating with Louisville before quoting it.

Under IAA, the two makers pair up again. Type II at 225 pounds comes in the Werner D1232-2 at 54 pounds and the Louisville AE4232 at 58, Type I at 250 pounds in the D1332-2 and the AE3232 at 60 pounds with a rope and pulley, and Type IA at 300 pounds in the D1532-2 and the Louisville AE2232 at 63 pounds on a full I-beam, which Louisville says gives a more stable connection and resists twisting.

Call 603-434-6911 or 508-754-3030 with your heaviest climber and load, and we will quote the 32 ft rating that covers both.

Werner D500-2 Series – Type IAA/IA Aluminum Extension Ladder

Carrying, Raising and Electrical Limits for 32 ft Aluminum Extension Models

Werner lists its two-section 32 ft models at 192 inches long, and Louisville lists 196 inches for the AE3232, 196.875 for the AE2232 and 197.5 for the AE1232HD, so a 32 needs a full-length rack or a long trailer. Each Louisville section is 16 feet, and the fly rides a long way when the rope is pulled, so two people raising the ladder together keeps the base planted. Set the length before anyone climbs, because OSHA bars extending an occupied ladder. Our store listing also notes that Werner bases separate from their flies for multi-purpose use, handy when the base alone covers a side job.

At 32 feet, more of the wiring around a building comes within reach of the fly. Louisville rates every AE model not safe around electricity, and OSHA calls for nonconductive side rails anywhere the worker or the ladder could contact exposed energized electrical equipment, which rules 32 ft aluminum extension ladders out for service drops, building lighting and sign work at this length.

We run regular weekly deliveries to Maine from New Hampshire, so a 192 inch ladder that will not fit your vehicle can still reach a Maine site.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Sizing Up From 28 ft Aluminum or Across to Fiberglass

A 32 makes sense once Werner’s rule of a ladder 7 to 10 feet longer than the support point runs past the 28, and if the high point sits lower, the 28 foot aluminum size is lighter and shorter on the rack. Our 32 ft extension ladders comparison sets these models beside the fiberglass and Aerolite options at the same height, and the whole aluminum extension ladder range covers each size.

You can browse roof brackets, planks and fall protection for high work by maker in our ladder and truck equipment brands hub.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Getting 32 ft Aluminum Extension Ladders Quoted and Delivered to Site

Setup space, transport and the last 375 pound aluminum rating all meet at this length, so we quote 32 ft aluminum extension ladders around your walls and your vehicle, and the Werner D1300-2 series gives a Type I option, with our trucks delivering across New Hampshire, Vermont, Maine, Massachusetts, Rhode Island and Connecticut.

32 Ft Aluminum Extension Ladders FAQs

How far from the wall does the base of a 32 ft aluminum extension ladder go?

OSHA sets the foot about one quarter of the working length out from the top support, so measure the length in use and allow that much clear ground.

Is 32 ft the longest extension size rated for 375 pounds in aluminum?

Among the series we list, yes. Werner's D532-2 is Type IAA, and our store shows the D500-2 at 300 pounds from 36 feet. Louisville lists the AE1232HD at Type IAA and the AE1240 at Type IA.

How heavy are 32 ft aluminum extension ladders?

Werner lists the D1232-2 at 54 pounds and the D532-2 at 74. Louisville lists 58 to 71 pounds across the AE4232, AE3232, AE2232 and AE1232HD.

Which 32 ft aluminum extension ladders include a rope and pulley?

Louisville lists a rope and pulley on the AE3232 and AE1232HD, and Werner lists a 3/8 inch rope on the D532-2.

What working length does a Louisville 32 ft aluminum model give?

Louisville lists a 29 foot maximum extended length from two 16 foot sections.

Can a 32 ft aluminum ladder be used for sign or lighting work?

Pick fiberglass whenever live circuits are near. Louisville marks its AE models not safe around electricity, and OSHA requires nonconductive side rails where the ladder could contact exposed energized equipment.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder