Aluminum Extension Ladders
20 ft Aluminum Extension Ladders in Household, Contractor and Industrial Duty Ratings and More
Werner and Louisville models at 20 ft compared on carrying weight, closed length, rung locks and reach, from a 27 pound Type II ladder to Type IAA designs rated for 375.
Homeowners and contractors choose 20 ft aluminum extension ladders for single-storey rooflines, garage roofs and high porch ceilings, where a light rail matters more than extra length. Nation Wide Ladder quotes the Werner D1220-2, D1320-2, D1520-2 and D520-2 and the Louisville AE2220, AE3220 and AE4220, plus the heavy-duty Louisville AE1200 line, and our team sorts every 20 by weight, closed length, duty rating from Type II to IAA, rung lock and the electrical limits of a metal rail.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Weight and Carry Across Each 20 ft Aluminum Series
Weight is the first reason crews pick 20 ft aluminum extension ladders. Werner lists the D1220-2 at 27 pounds, and Louisville lists the AE3220 and AE4220 at 32 pounds and the AE2220 at 37. At the heavy end, Werner’s D520-2 weighs 42 pounds and Louisville’s AE1220HD weighs 43, the cost of a 375 pound rating. For a painter who drops and raises the ladder at every window, the 16 pounds between the lightest and heaviest 20 matter more than any figure on the label. Werner’s height chart averages 19 feet of reach for a 20 used by a 5 foot 7 inch climber, so the light carry still covers a single-storey eave.
Closed length shapes the carry as well. Werner gives its two-section 20 ft models a closed length of 120 inches, and Louisville lists 124 inches for the AE3220, 124.875 for the AE2220 and 125.5 for the AE1220HD, so any 20 rides on a rack built for a 10 foot load. Each Louisville 20 ft model is built from two 10 foot sections, and our store listing notes that Werner builds each D-series base and fly to separate for multi-purpose use.
Our team checks who carries the ladder and how often it moves before we quote, so the 20 ft weight on your order suits the person lifting it.
Duty Ratings on 20 ft Aluminum Extension Models From Type II Through IAA
Both makers line up the same three middle ratings at 20 ft. Type II covers 225 pounds in the Werner D1220-2 and Louisville AE4220, Type I covers 250 pounds in the D1320-2 and AE3220, and Type IA covers 300 pounds in the D1520-2 and the Louisville AE2220. The rating has to cover the climber plus every tool and bundle carried up, so a roofer with shingles on a shoulder needs more than a homeowner with a gutter scoop.
The 20 is also where the Werner D500-2 series begins, and its D520-2 takes the size to Type IAA for 375 pounds on extra heavy-duty rails. Louisville’s catalog lists the AE1220HD at the same Type IAA rating, with a MAXLOCK rung lock, QuickLatch and a rope and pulley, while our store lists the AE1200 series at Type IA, so we confirm the exact model and rating on each quote. Our store listings describe the D1200-2 and D1300-2 as medium duty, which matches the Type II and Type I ratings they carry. Occasional household work sits well at Type II, and daily trade work at Type IA or above.
Send us a list of who climbs and what they carry, by phone at 603-434-6911 or 508-754-3030, and we will quote a 20 ft rating for each climber.
Rung Locks, Shoes and the Electrical Limit of 20 ft Aluminum Rails
Werner fits the D1220-2, D1320-2, D1520-2 and D520-2 with Alflo rung joints, 1.75 inch slip resistant D-rungs and spring-loaded extruded rung locks, and builds this line to ANSI A14.2, the standard for portable metal ladders. The D1520-2 adds extra heavy-duty I-beams and a rail-on-rail design that widens the fly. Louisville’s AE4220 brings the QuickLatch, a steel swivel shoe behind a metal shield and outside slide guides, and the AE2220 and AE3220 use the polymer MAXLOCK rung lock with D-shaped rungs. At the foot, Werner fits the D1220-2 and D1520-2 with Shu-Lok shoes and spur plates, and the D520-2 with a heavy duty, self-aligning shoe.
Every one of these rails conducts electricity. Louisville marks each AE model as not safe around electricity, and OSHA 1926.1053(b)(12) requires nonconductive side rails wherever the worker or the ladder could contact exposed energized electrical equipment. A service entrance, a porch light being rewired or an overhead drop beside the eave all call for fiberglass rather than 20 ft aluminum extension ladders, since the rule covers any contact the ladder could make, including while it is carried or raised.
At our Windham and Worcester showrooms you can work a Werner rung lock and a Louisville QuickLatch side by side before you choose.
Where the 20 ft Aluminum Size Sits Among Other Extension Lengths
A 20 handles single-storey work, and the 24 foot aluminum size takes over at a second-storey gutter. Our 20 ft extension ladders comparison adds fiberglass and Aerolite options at the same length, and the full aluminum extension ladder range covers every height we list.
You can browse racks, staging and fall protection from the other makers we carry in our ladder and truck equipment brands hub.
Quotes on 20 ft Aluminum Extension Ladders With New England Delivery
From a 27 pound D1220-2 for weekend gutters to a 375 pound D520-2 for a working crew, we quote 20 ft aluminum extension ladders by the climber and the carry, and the Werner D1300-2 series is a ready Type I choice in between, delivered by our own trucks across New Hampshire, Massachusetts, Connecticut, Rhode Island, Vermont and Maine.
20 Ft Aluminum Extension Ladders FAQs
What is the lightest 20 ft aluminum extension ladder you list?
Werner's D1220-2 at 27 pounds, rated Type II for 225 pounds. Louisville's AE3220 and AE4220 follow at 32 pounds.
How long is a 20 ft aluminum extension ladder when closed?
Werner lists 120 inches for its two-section 20 ft models, and Louisville lists 124 to 125.5 inches across its AE series.
Which 20 ft aluminum extension models carry a 375 pound rating?
Werner's D520-2 is rated Type IAA for 375 pounds, and Louisville lists the AE1220HD at Type IAA too. We confirm the AE1200 rating on your quote, since our store lists that series at Type IA.
Can a 20 ft aluminum ladder go near power lines?
Keep it away from them. Louisville marks its AE models not safe around electricity, and OSHA requires nonconductive side rails wherever the worker or ladder could contact exposed energized equipment.
What working length does a Louisville 20 ft aluminum model give?
Louisville lists a maximum extended length of 17 feet and a maximum reach of 19 feet 10 inches, figured for a 5 foot 7 inch person reaching 12 inches overhead.
Do Werner 20 ft aluminum extension ladders come apart?
Our store listing notes a separable base and fly on the D1200-2, D1300-2, D1500-2 and D500-2 series for multi-purpose use.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.







