Aluminum Extension Ladders

24 ft Aluminum Extension Ladders for Second-Floor Work in Type II, I, IA and IAA Ratings and More

Second-floor reach after overlap, Werner and Louisville paired at each load rating, weights from 33.5 to 52 pounds, leveling options and the electrical limit of a metal rail on 24 ft extension models.

Painters, gutter crews and siding installers buy 24 ft aluminum extension ladders for second-floor work on a house, and the decision turns on who climbs and what they carry. Nation Wide Ladder quotes the Werner D1224-2, D1324-2, D1524-2 and D524-2 and the Louisville AE4224, AE3224 and AE2224, with Louisville's heavy-duty AE1200 series alongside, and our team pairs every 24 by duty rating from Type II to IAA, weight, reach after overlap, leveling options and the electrical rule every metal rail carries.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

How Far a 24 ft Aluminum Ladder Reaches on Second-Floor Work

Overlap comes off the label first. Louisville builds each 24 from two 12 foot sections and lists a maximum extended length of 21 feet, with a maximum reach of 23 feet 8 inches for a 5 foot 7 inch person reaching 12 inches overhead. Werner’s height chart averages 23 feet of reach at this size, and Werner keeps the top standing level four rungs short of the top of the fly. On most two-storey houses, that range puts 24 ft aluminum extension ladders level with the work under the roof edge.

Those figures cover most second-floor gutters, fascia boards and upper window trim, but measure from the ground to the highest point the ladder will rest on rather than estimating it. For roof access, OSHA 1926.1053 wants the side rails at least 3 feet above the landing, which uses part of that 21 foot extended length, and it sets the foot about one quarter of the working length out from the wall. A gable vent or dormer above the gutter line can push the job up to the 28 foot aluminum size.

Over 50 years of sizing ladders for homeowners and contractors has taught us to ask for the gutter height first, so the 24 ft model we quote reaches it from a safe rung.

Louisville AE1200 Series – Type IA Aluminum Extension Ladder

Werner and Louisville 24 ft Aluminum Extension Pairs by Load and Weight

At each rating the two makers line up a matching pair of 24 ft models. For 225 pounds at Type II, Werner lists the D1224-2 at 33.5 pounds and Louisville the AE4224 at 38. For 250 pounds at Type I, the D1324-2 weighs 40 pounds and the AE3224 weighs 38. For 300 pounds at Type IA, the Werner D1524-2 weighs 45 pounds on stacked rails that Werner says widen the fly rungs, and the Louisville AE2224 weighs 42 on a full I-beam that Louisville says resists twisting.

Both makers also reach Type IAA at 24 feet. Werner’s D524-2 is rated for 375 pounds at 49 pounds, and Louisville’s catalog lists the AE1224HD at the same rating and 52 pounds, with a rope and pulley and cast end caps. Our store lists the AE1200 series at Type IA, so we confirm that model on the quote. The spread from 33.5 to 52 pounds is what a siding crew feels on its tenth raise of the morning, while a homeowner climbing twice a year mostly feels the rating.

Saturday morning hours at both of our showrooms give you time to lift a 33.5 pound and a 49 pound 24 back to back before you order.

Louisville AE2200 Series – Type IA Aluminum Extension Ladder

Leveling, Footing and Power Line Limits on 24 ft Aluminum Extension Models

Second-floor work often means a sloped yard or a step beside the foundation. Louisville lists the LevelOK stabilizer and leveler for each of its 24 ft series and the E34 automatic adjusting leveler for the AE2224, and the AE4224 comes with a steel swivel shoe that works tread down or as a spike. On the Werner side, the D1224-2 and D1524-2 come with Shu-Lok shoes and spur plates, and the D524-2 with a heavy duty, self-aligning shoe. OSHA 1926.1053 limits ladders to stable, level surfaces unless they are secured, so a leveler is how you square the base on a slope.

Second-floor work also brings the service drop close. Louisville labels every AE model not safe around electricity, and OSHA requires nonconductive side rails anywhere the climber or the ladder could contact exposed energized electrical equipment, so 24 ft aluminum extension ladders belong on walls well away from where the drop lands. Check the path of the fly before raising the 24 as well, because a ladder swung into a drop on its way up makes the same contact as one leaning on it.

We also install truck and van racks, so a 24 that closes at 144 to 149.5 inches rides on a rack sized for it.

Louisville AE3200 Series – Type I Aluminum Extension Ladder

Stepping Between 20, 24 and 28 ft Aluminum Sizes

If the job never climbs past a single storey, the 20 foot aluminum size is lighter to carry, and our 24 ft extension ladders comparison sets these models beside fiberglass and Aerolite builds. The wider aluminum extension ladder lineup runs through every height we list.

You will find racks, planks and harnesses from every maker we carry in our ladder and truck equipment brands hub.

Louisville AE4200 Series – Type II Aluminum Extension Ladder

24 ft Aluminum Extension Ladders Quoted for Your Crew and Delivered

Whether the climber is a homeowner at Type II or a crew hauling siding at Type IAA, we quote 24 ft aluminum extension ladders by load first and weight second, and the Louisville AE3200 series is a ready Type I option, with regular weekly deliveries to Maine from New Hampshire and our trucks covering Massachusetts, Connecticut, Rhode Island and Vermont.

24 Ft Aluminum Extension Ladders FAQs

How much working length is left on a 24 ft aluminum extension ladder after overlap?

Louisville lists a maximum extended length of 21 feet for its 24 ft models, built from two 12 foot sections, and a maximum reach of 23 feet 8 inches.

Which 24 ft aluminum extension model is the lightest?

Werner's D1224-2 at 33.5 pounds, rated Type II for 225 pounds.

Is there a 24 ft aluminum extension ladder rated for 375 pounds?

Werner's D524-2 is rated Type IAA at 49 pounds, and Louisville lists the AE1224HD at Type IAA and 52 pounds. We confirm the AE1200 model on your quote.

What separates the Werner D1524-2 from the Louisville AE2224?

Both are Type IA for 300 pounds. The Werner uses stacked rails for a wider fly and weighs 45 pounds, while the Louisville uses a full I-beam and weighs 42.

Which leveler fits a Louisville 24 ft extension model?

Louisville lists the LevelOK stabilizer and leveler for each 24 ft series and the E34 automatic adjusting leveler for the AE2224.

Why keep a 24 ft aluminum ladder away from the service drop?

Aluminum conducts electricity. Louisville marks its AE models not safe around it, and OSHA requires nonconductive side rails where the ladder could contact exposed energized equipment.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder