Extension Ladders

Fiberglass Extension Ladders in Two and Three Section, Type IAA and Lightweight Utility Designs and More

Werner D6200-2, D6200-3, D7100-2 and Aerolite B7100-2 fiberglass extension ladders beside the Louisville FE3200, with 300 and 375 pound ratings, 16 to 40 foot lengths, rung locks and pole fittings.

Buying fiberglass extension ladders means settling the rating, the section count and the fittings, all on the nonconductive rails OSHA calls for near exposed energized equipment. Nation Wide Ladder quotes the Werner D6200-2 and three-section D6200-3, the Type IAA D7100-2, the lighter Aerolite B7100-2 and the Louisville FE3200, and we help you set length, rating and fittings against the building or the pole.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why Electrical and Utility Crews Choose Fiberglass Extension Ladders

A raised extension ladder often leans within reach of a service drop, a meter or an overhead strand. OSHA 1926.1053 calls for nonconductive side rails anywhere the climber or ladder could contact exposed energized equipment, and Louisville labels its fiberglass FE3200 safe around electricity while marking every aluminum extension series unsafe. That makes fiberglass extension ladders the default for electricians, utility and telecom crews, HVAC installers and solar teams, and a sensible choice for any contractor whose job list includes work near a building’s power. Cal/OSHA notes that water can make a ladder conductive, so fiberglass reduces risk rather than making live work safe. OSHA also counts the climber, tools and materials together against the duty rating, which is why line crews carrying hardware often move up to a 375 pound fiberglass model.

The trade is weight. Louisville lists a 20 foot fiberglass FE3220 at 42 pounds against 32 for the aluminum AE3220, and a 24 foot FE3224 at 51 pounds. Crews clear of wiring can save that weight with our aluminum extension ladders, and both materials sit within our wider extension ladder best sellers.

Before we quote, our team checks which lines run near the building and what each climber carries, so the fiberglass series on your order suits the site and the load.

Louisville FE3200 Series – Type IA Fiberglass Extension Ladder

Werner and Louisville Fiberglass Extension Ladders by Rating, Rung and Lock

The Werner D6200-2 is the Type IA workhorse at 300 pounds, in 16 to 40 foot sizes, with 1.63 inch slip-resistant D-rungs on Alflo rung joints, interlocking rails and a Shu-Lok shoe. The D6200-3 keeps that rating on three shorter sections from 16 to 32 feet, so it closes shorter for a van rack. The Werner D7100-2 moves to Type IAA at 375 pounds from 16 to 40 feet, pre-pierced for a V-rung and cable hooks. The Aerolite B7100-2 keeps Type IAA from 20 to 32 feet on BOXLOK box rails while weighing about 25 percent less than a standard 375 pound ladder, and the B7100-2X adds a factory cable hook and V-rung for strands and poles up to 10 inches across. Our Werner fiberglass extension ladders page covers each fit-out.

The Louisville FE3200 is Type IA at 300 pounds from 16 to 40 feet, with a steel swivel shoe behind a metal shield, outside slide guides, a direct rung-to-rail connection, the polymer MAXLOCK rung lock and the QuickLatch that holds fly and base together once extended.

Free in-person consultations at our Windham NH and Worcester MA showrooms let you raise a D6200-2 beside an FE3200 and compare their locks.

Werner B7100-2 Series – Type IAA Aerolite Fiberglass Extension Ladder

Sizing Fiberglass Extension Ladders From 20 to 32 Feet for Reach and Transport

The size on a fiberglass extension model is the combined length of its sections, and Cal/OSHA sets a minimum overlap of 36 inches on two-section ladders up to 32 feet, so working reach always falls short of the label. Werner’s advice is to buy 7 to 10 feet more ladder than the highest support point, and OSHA wants 3 feet of rail above a roof landing. Weight climbs quickly with length, since Louisville lists its FE3228 at 58 pounds and its FE3232 at 70, closing to 173.5 and 197.5 inches. At setup, the foot goes roughly one foot out for every four feet of height to the support, and Werner keeps climbers no higher than the fourth rung from the top.

Compare 20 ft fiberglass extension ladders for single-storey eaves, 24 ft fiberglass extension ladders and 28 ft fiberglass extension ladders for two-storey work, and 32 ft fiberglass extension ladders for taller gables. Werner lists PK70-1 levelers for the D6200 and D7100, and the CL Aerolite versions arrive with levelers fitted.

Our own trucks deliver door to door across New England, so a 32 foot fiberglass model reaches your yard without a borrowed trailer.

Werner B7100-2X Series – Type IAA Aerolite Fiberglass Extension Ladder

Fiberglass Extension Ladders on the Rack and the Utility Truck

A long fiberglass extension model shapes the vehicle it rides on. Cal/OSHA advises carrying extension ladders with the fly retracted and storing them on racks that support them, so a 32 foot ladder usually means a matched truck rack or a drop-down van rack, along with storage for the levelers, hooks and harnesses that travel with it.

To match racks and storage to those ladders, look across every maker in our ladder and truck equipment brands hub.

Werner D6200-2 Series – Type IA Fiberglass Extension Ladder

Ordering Fiberglass Extension Ladders by Series, Length and Fit-Out

Call 603-434-6911 in New Hampshire or 508-754-3030 in Massachusetts, or send us a list by series and length, and Nation Wide Ladder will quote fiberglass extension ladders with over 50 years of supplying contractors and homeowners behind the advice. Share the heights, trades and any pole or strand work, and we will match the fiberglass series and fittings to them. We deliver throughout Connecticut, Rhode Island, Vermont, Maine and both home states, and ship anywhere in the US.

Fiberglass Extension Ladders FAQs

Which fiberglass extension ladders are rated Type IAA?

The Werner D7100-2 and the Aerolite B7100-2 and B7100-2X, each rated for 375 pounds. The Werner D6200-2, D6200-3 and Louisville FE3200 are Type IA at 300 pounds.

Why choose a three-section fiberglass model?

The Werner D6200-3 spreads its length over three shorter sections, so it closes shorter than a two-section ladder of the same size and fits a van rack more easily.

How heavy are fiberglass extension ladders?

Louisville lists the FE3220 at 42 pounds, the FE3224 at 51, the FE3228 at 58 and the FE3232 at 70.

Which fiberglass extension models work on poles and strands?

The Werner Aerolite B7100-2X arrives with a factory cable hook and V-rung for strands and poles up to 10 inches, and the D7100-2 is pre-pierced to take them.

Do fiberglass extension ladders take levelers?

Werner lists PK70-1 levelers for its D6200 and D7100 series, and the CL versions of the Aerolite come with levelers fitted.

How long do fiberglass extension models run?

The Werner D6200-2, D7100-2 and Louisville FE3200 run from 16 to 40 feet, the D6200-3 to 32 feet and the Aerolite from 20 to 32 feet.

Need help choosing the right ladder or truck equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder