Werner Lanyards

Werner Positioning Lanyards in Fixed and Adjustable Web, Vinyl-Coated Cable, Grade 80 Chain Rebar Models and More

Web lanyards from 2 to 6 feet, adjustable and loop-end versions, cable and chain rebar models, the OSHA 2 foot free fall rule, anchorage strength, hook ends and wear checks by material.

Werner positioning lanyards hold a worker against a wall, form, pole or rebar mat so both hands stay free for the job. Length, hook ends and material all decide whether a strap supports the worker safely, and Nation Wide Ladder helps crews choose among fixed and adjustable web, vinyl-coated cable and Grade 80 chain rebar versions with snap hook, rebar hook and loop ends, all built without an energy absorber for positioning and restraint only.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

What Werner Positioning Lanyards Do on a Wall, Pole or Mat

Positioning is about support, not fall arrest. A rebar worker on a vertical mat, a carpenter setting wall forms or a utility worker on a pole leans back into a short strap clipped to the hip D-rings of the harness and around or onto the structure, and that strap carries their weight while they work. OSHA’s general industry rules describe a positioning system as equipment that supports a worker on an elevated vertical surface with both hands free.

Werner positioning lanyards have no energy-absorbing features, so Werner limits them to positioning and restraint, and its guidance does not allow a lanyard without a shock absorber in fall arrest. Restraint means the strap is short enough to stop the worker reaching an edge at all. Because these lanyards cannot arrest a fall, the employer’s plan decides whether a separate fall arrest connection to the back D-ring is needed as well. Werner notes that fall protection is required at 6 feet in construction and 4 feet in general industry, so a hip strap is usually one part of the system.

Our team will look at the structure and the rest of your fall plan with you, so the Werner strap you order fits alongside it.

Werner Fall Protection C111102 2FT Web Positioning Lanyard (1in Web, 2 Snap Hook)

Werner Positioning Lanyards in Web, Cable and Chain

Web lanyards make up most of the range. The C111102, C111103, C111104, C111105 and C111106 web positioning lanyard come in 2, 3, 4, 5 and 6 foot lengths with 1 inch wear-indicating polyester webbing and a snap hook at each end. The C111206 swaps one snap hook for a rebar hook, the C113106 uses a loop at one end, and the C111506 has an adjustable length.

Cable versions, the C161102, C161103 and C161106, use 1/4 inch vinyl-coated cable that Werner describes as heat and abrasion resistant, in 2, 3 and 6 foot lengths, which suits work near heat or against rough steel. Chain rebar lanyards are the most compact. The C191204 22 inch chain rebar positioning lanyard and the 18 inch C191203 use Grade 80 twist link chain, which Werner chooses for strength and durability, with snap hooks and a rebar hook for bar. Every Werner model uses snap hooks designed to prevent false engagement, which counts on a strap clipped and unclipped all day.

Our own trucks bring Werner positioning lanyards door to door across New England, and we ship them anywhere in the US.

Werner Fall Protection C111103 3FT Web Positioning Lanyard (1in Web, 2 Snap Hook)

OSHA Free Fall and Strength Rules for Werner Positioning Gear

OSHA treats positioning as its own system. Under 1926.502(e), a positioning device must be rigged so the worker cannot free fall more than 2 feet, which is why these straps are short, and the anchorage must support at least twice the potential impact load or 3,000 pounds, whichever is greater. Connecting assemblies need a minimum tensile strength of 5,000 pounds, D-rings and snap hooks are proof tested to 3,600 pounds, and connectors must be drop forged, pressed or formed steel or an equivalent with a smooth, corrosion-resistant finish.

Only locking snap hooks are permitted, and unless designed for it, a hook may not clip directly to webbing, rope, another snap hook or a D-ring that already holds a connector. OSHA 1910.140 also requires positioning systems to withstand a 4 foot drop of a 250 pound weight without failure. A body belt is accepted in a positioning system, which is why a belt such as the Werner M2100 can carry these lanyards even though a belt may never be used for fall arrest.

Send us the anchor points and gear list, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner hardware that matches.

Werner Fall Protection C111104 4FT Web Positioning Lanyard (1in Web, 2 Snap Hook)

Sizing, Hook Ends and Wear on Werner Positioning Lanyards

Length is the main decision. The strap has to pass around or onto the member and reach both hip rings while leaving the worker at a comfortable distance, since too long risks more than 2 feet of free fall and too short jams the worker against the work. The adjustable C111506 suits crews moving between columns and poles of different sizes. Two snap hooks suit straps that wrap a pole, a rebar hook connects straight to bar, and the C113106 loop end needs its label checked for approved uses.

These lanyards carry load for hours against concrete and steel, so wear builds fast. OSHA requires inspection before each use, and Werner adds a yearly inspection by a competent person other than the user. On web, look for cuts, burns, glazing and broken stitching. On cable, look for split vinyl, kinks and broken wires, and on chain, check each link for stretch and nicks. Confirm every hook closes and locks by itself, hand wash webbing in mild soap with air drying, and wipe cable and chain dry before storage.

Both our showrooms keep Saturday morning hours, so a worn strap can be replaced before the next week’s pour.

Werner Fall Protection C111506 6FT Web Positioning Adjustable Lanyard (1in Web, Snap Hook)

Werner Positioning Lanyards Paired With Harnesses and Arrest Gear

A hip strap only works with a harness or belt that carries the side rings. Our Werner positioning harnesses are built with them, and the full Werner lanyard range covers the fall arrest side. Concrete and utility crews often buy that gear alongside ladders and truck equipment from several manufacturers.

When the job needs more than one maker, our ladder and truck equipment brands hub lays them all out.

Werner Fall Protection C111105 5FT Web Positioning Lanyard (1in Web, 2 Snap Hook)

Why Rebar and Pole Crews Buy Werner Positioning Lanyards From Us

We have served homeowners and contractors for over 50 years and offer free consultations at our Windham NH and Worcester MA showrooms. Compare models in our lanyard category or the Werner brand overview, then tell Nation Wide Ladder the structure, reach and material, and we will quote Werner positioning lanyards that suit the work.

Werner Positioning Lanyards FAQs

Can Werner positioning lanyards be used for fall arrest?

No. They have no energy absorber, so Werner limits them to positioning and restraint.

How far can a worker free fall on a Werner positioning lanyard?

OSHA 1926.502(e) requires positioning devices to be rigged so the worker cannot free fall more than 2 feet.

What chain do the Werner rebar positioning lanyards use?

The C191203 (18 inch) and C191204 (22 inch) use Grade 80 twist link chain.

Can Werner lanyards for positioning connect to a body belt?

Yes. OSHA accepts body belts in positioning systems, though never in personal fall arrest systems.

What lengths do Werner web lanyards come in?

The C111102 to C111106 cover 2, 3, 4, 5 and 6 feet, and the C111506 is adjustable.

Which Werner lanyards resist heat and abrasion?

The C161102, C161103 and C161106 use 1/4 inch vinyl-coated cable that Werner describes as heat and abrasion resistant.

Need help choosing the right Werner equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder