Werner Lanyards
Werner Rebar Positioning Lanyards in Grade 80 Chain, Polyester Web and Shock-Absorbing Rebar Hook Versions and More
Grade 80 chain and web connectors for wall and form work, the shock-absorbing hook models that handle fall arrest, OSHA limits, hook gates and daily chain checks.
Werner rebar positioning lanyards hold an ironworker or form setter against a reinforcing wall or mat with both hands free, and the challenge is keeping that connector separate from the Werner fall arrest gear the same worker still needs. Nation Wide Ladder helps ironworkers sort the Grade 80 chain models, the Werner polyester web model and the shock-absorbing rebar hook lanyards, including DeCoil, SoftCoil, stretch, cable, free fall and leading edge versions.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Rebar Crews Use Werner Positioning Lanyards on the Wall
Tying rebar on a vertical curtain or a column cage means leaning back against steel for long stretches with both hands busy. A Werner chain or web connector carries that load, letting the worker hang in the harness instead of gripping the bars. Werner states plainly that these models carry no energy absorber, so it limits them to work positioning and restraint, and they can never stand in for fall arrest.
That is why an ironworker on a wall typically wears two connections. One holds the working posture, while a separate Werner shock-absorbing lanyard or self-retracting lifeline tied to a suitable anchor protects against a fall. The rebar hook on each connector opens wide enough to close around reinforcing bar, so the worker can move the tie-off point as the wall rises.
OSHA treats these connectors as part of a positioning device system with its own rigging limits, so the lanyard is only one of several choices a foreman makes on the job.
Over 50 years of supplying contractors lets us separate the positioning and arrest roles on your crew before any Werner gear is quoted.
Werner Rebar Positioning Lanyards in Chain and Web, Plus Shock-Absorbing Hook Options
Two Werner chain models anchor the positioning side of the range. The C191203 runs 18 inches and the Werner C191204 chain lanyard runs 22 inches, both in Grade 80 twist link chain with two snap hooks and a rebar hook. For a softer connector, the Werner C111206 web lanyard pairs a snap hook and a rebar hook on 6 feet of wear indicating polyester web, again with no energy absorption.
The rest of the range is fall arrest gear with rebar hooks. Werner DeCoil models such as the C311200 single leg and C411200 twin leg use the DCELL shock pack, and the C446200 stretch twin leg adds an 18 inch D-ring extender and a hook that opens 2.5 inches. Werner SoftCoil models such as the C351200 absorb energy through an inner core that runs the full length and carry an impact indicator. The C311220 and C411220 use an extra thick DeCoil pack that Werner rates for a foot-level tie-off with 12 feet of free fall for a worker up to 310 pounds, or for a worker up to 400 pounds when free fall is held to 6 feet. The C461220LE cable twin leg is approved for leading edge work on steel beam, precast concrete and B-deck, and Werner also offers Kevlar arc flash versions with these hooks.
Our team helps you pick the right positioning and arrest lanyards for each task, so the hook, length and pack suit the work.
OSHA Positioning Rules That Govern Werner Rebar Hook Lanyards
OSHA 1926.502(e) sets the limits for any positioning device system. It must be rigged so the worker cannot free fall more than 2 feet, and it must be secured to an anchorage that can hold at least twice the potential impact load of a fall or 3,000 pounds, whichever is greater. Connecting assemblies need a minimum tensile strength of 5,000 pounds, D-rings and snap hooks must be proof tested to 3,600 pounds without cracking, breaking or permanent deformation, and connectors must be drop forged, pressed or formed steel or an equivalent material with a corrosion-resistant finish.
Short chain makes the 2 foot limit easier to respect, which is one reason Werner makes its chain models in 18 and 22 inch lengths. On the fall arrest side, OSHA caps free fall at 6 feet and arresting force at 1,800 pounds with a body harness, which is where the shock-absorbing rebar hook models come in. Werner adds that components sold and tested as a system are not interchangeable with other makers’ parts, so match Werner rebar positioning lanyards to a compatible harness and anchor.
Send us the wall heights and crew list, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote the chain, web and arrest connectors together.
Checking Chain, Hooks and Webbing on Werner Rebar Lanyards
OSHA requires positioning device systems to be inspected before each use for wear, damage and deterioration, with defective parts removed from service. Werner adds an inspection at least once a year by a competent person other than the user. On chain models, look along every link for stretch, bends, nicks and corrosion, and work each snap hook and the rebar hook to confirm the gate closes and locks on its own. Concrete splatter and form oil can build up inside a hook gate, so clear it before the next shift.
On the Werner web model and the shock-absorbing models, check the webbing for cuts, burns and fraying and look at the stitching where it meets each hook. Werner says not to use any equipment showing a load indicator warning, and an arrest lanyard that has taken a fall comes out of service. Hand wash webbing in mild soap, rinse, wipe it dry and hang it in the shade, never in a machine. Record inspections on the label rather than the web.
At our Windham NH and Worcester MA showrooms you can handle Werner chain and web connectors side by side before you choose.
Werner Rebar Positioning Gear Alongside Fall Arrest and Access Equipment
An ironworking crew needs the positioning connector, the arrest connector and a harness with hip D-rings to clip both into, so the three get planned as one kit. The broader Werner lanyards range covers the arrest side in more lengths and hook styles. Ladders, staging and the truck racks that carry them to the pour usually come from several other manufacturers.
To compare those makers in one place, take a look at our ladder and truck equipment brands hub.
Ordering Werner Rebar Positioning Lanyards From Our Team
Our own trucks deliver across New England and we ship anywhere in the US, so chain, web and arrest connectors can reach the pour on one delivery. Browse the Werner brand page or the Werner store, then send Nation Wide Ladder your wall heights and crew sizes for a quote on Werner rebar positioning lanyards and the arrest gear that goes with them.
Werner Rebar Positioning Lanyards FAQs
Can Werner rebar positioning lanyards be used for fall arrest?
No. The Werner chain and web models have no energy absorber, so Werner limits them to work positioning and restraint. Pair them with a Werner shock-absorbing lanyard or SRL for fall arrest.
What chain does Werner use in its rebar lanyards?
The C191203 (18 inch) and C191204 (22 inch) use Grade 80 twist link chain with two snap hooks and a rebar hook.
How far can a worker free fall on a positioning lanyard?
OSHA 1926.502(e) requires positioning systems to be rigged so the worker cannot free fall more than 2 feet.
Which Werner rebar hook lanyards work for a foot-level tie-off?
The Werner C311220 and C411220 are rated for 12 feet of free fall for a worker up to 310 pounds, or for a worker up to 400 pounds with free fall held to 6 feet.
Is there a Werner rebar hook lanyard for leading edge work?
Yes. The Werner C461220LE cable twin leg is approved for leading edge work on steel beam, precast concrete and B-deck.
How often should Werner rebar connectors be inspected?
Before each use under OSHA, and at least once a year by a competent person other than the user, as Werner advises.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.











