Werner Lanyards
Werner Shock-Absorbing Lanyards in DeCoil, Stretch, Tie-Back, Adjustable, Leading Edge Cable Models and More
DCELL shock packs, DeCoil and DeCoil Stretch webbing, tie-back and adjustable single leg models, 12 foot free fall cable, OSHA force limits, fall clearance and pack inspection.
Werner shock-absorbing lanyards connect the back D-ring of a harness to an anchor and use a tearing shock pack to slow a falling worker before the force reaches the body. Picking the wrong length or hook for the anchor can eat up clearance, so Nation Wide Ladder helps crews choose among single leg DeCoil, DeCoil Stretch, tie-back, adjustable and leading edge cable models, alongside twinleg versions of the same designs.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
How Werner Shock-Absorbing Lanyards Protect a Worker
A fall caught on a static strap would hit the worker with a sudden spike of force, and a shock-absorbing lanyard spreads that stop over a short distance instead. Werner’s DeCoil models use the DCELL shock pack, a deceleration device built to tear in a controlled way, so the lanyard lengthens a little as it soaks up the energy and the load on the harness drops. With a body harness, OSHA requires a personal fall arrest system to keep the arresting force to 1,800 pounds or less, stop the worker within 3.5 feet of deceleration, and limit free fall to 6 feet with no contact with a lower level.
Werner does not allow a lanyard without a shock absorber to be used for fall arrest. Shock-absorbing lanyards suit any trade that ties off from a harness to a fixed anchor, from roofers and framers to steel erectors, painters on lifts and maintenance crews. Werner also accepts its shock-absorbing lanyards for restraint, because a worker held back from an edge cannot generate the force needed to open the pack.
Send us a list of the trades and anchors on the job, or call 603-434-6911 in NH or 508-754-3030 in MA, and we will quote Werner shock-absorbing models to suit.
Werner Shock-Absorbing Lanyards From DeCoil to Tie-Back
The core model is the Werner C311100 6 foot DeCoil lanyard, with 1 inch wear-indicating polyester webbing, a DCELL pack and snap hooks designed to prevent false engagement. The C311104 is the 3 foot version, the C311102 adds length adjustment, rebar hook versions such as the C311200 suit bar and structural members, and the C313100 swaps the harness-end snap hook for a web loop. The C380006 uses wider 1.75 inch webbing with the same pack. DeCoil Stretch models, the C341100 and C341200, use elastic webbing that pulls in from 6 feet to 4 feet when slack, which cuts tripping and snagging on a deck.
Tie-back shock-absorbing models help where there is no ready anchor. The C311101 and C311201 use extra heavy duty webbing that wraps a beam and hooks back onto itself, the C311701 adds a tie-back hook designed to connect straight to the web, and the C311103 combines tie-back with adjustment. For a foot-level tie-off or heavier workers, the C361120LE single leg cable leading edge lanyard carries an extra-thick DeCoil pack.
Our own trucks deliver Werner shock-absorbing lanyards door to door across New England, and we ship anywhere in the US.
Free Fall and Clearance for Werner Shock-Absorbing Lanyards
Each of the Werner shock-absorbing lanyards needs room under the worker to do its job. The worker drops through the free fall before the lanyard goes taut, then through the deceleration distance as the pack opens, and the body hangs some distance under the D-ring once the fall stops. OSHA allows up to 6 feet of free fall and 3.5 feet of deceleration, so a 6 foot shock-absorbing lanyard anchored low on a short deck can run out of room. Werner publishes clearance charts and recommends plotting the job on them rather than estimating in the field.
Anchor height changes the result. Tying off overhead keeps free fall short, while a foot-level anchor lengthens it, and only shock-absorbing models designed for that use belong there. Werner designs the extra-thick pack on the C361120LE for a foot-level tie-off with up to 12 feet of free fall for a 310 pound worker, or 6 feet for workers up to 400 pounds. Werner shock-absorbing designs come in 3, 4, 5 and 6 foot lengths, and where the work needs more reach Werner points users to a longer self-retracting lifeline, warning never to attach a lanyard to an SRL.
Our team will check anchor height and worker weight against the Werner clearance charts with you before you order.
Choosing and Inspecting Werner Shock-Absorbing Lanyards
Pick the shortest shock-absorbing lanyard that still lets the work get done, because shorter means less free fall, and let an adjustable C311102 cover both close and side anchors. Standard snap hooks fit D-ring anchors and straps, while rebar hooks open wider for bar and pipe. Werner rules out clipping two snap hooks into one D-ring, hooking onto a horizontal lifeline or onto a webbing loop, since each can cause rollout, and OSHA requires locking snap hooks. Stretch webbing keeps a deck clear, tie-back webbing wraps a beam, and vinyl-coated cable resists heat and abrasion.
A shock pack works once, so check the DCELL cover for tears, open stitching or any sign of deployment first. Run the wear-indicating webbing through your hands for cuts, burns, fraying or stiff sections, and confirm each hook gate closes and locks on its own. Werner asks for an inspection before each use and a yearly inspection by a competent person other than the user, and OSHA pulls any lanyard that has taken an impact load. Werner allows hand washing with mild soap and air drying out of direct sun.
When a pack opens on a Friday, both our showrooms keep Saturday morning hours so the crew can replace an opened shock-absorbing lanyard before Monday.
Werner Shock-Absorbing Lanyards Within a Complete Tie-Off System
A shock-absorbing lanyard only works as part of a system, with a harness on one end and a rated anchor on the other. Workers who move between anchors without unclipping are better served by our Werner twin leg lanyards, and the wider Werner lanyard range adds positioning and arc flash options. Crews often buy those pieces alongside ladders and truck gear from several manufacturers.
To see the rest of the manufacturers we carry, head to our ladder and truck equipment brands hub.
Why Crews Order Their Werner Shock-Absorbing Gear Through Us
We have served homeowners and contractors for over 50 years from our Windham NH and Worcester MA showrooms. Compare models in our lanyard category or the Werner brand overview, then tell Nation Wide Ladder the anchor, tie-off height and worker weights, and we will quote Werner shock-absorbing lanyards that suit the clearance on site.
Werner Shock-absorbing Lanyards FAQs
Can Werner shock-absorbing lanyards be used for restraint?
Yes. Werner accepts it, because a worker in restraint cannot generate enough force to open the shock absorber.
What lengths do Werner shock-absorbing lanyards come in?
Werner lists 3, 4, 5 and 6 foot lengths, and 6 feet is the maximum.
Which Werner lanyards allow a foot-level tie-off?
Models with the extra-thick DeCoil pack, such as the C361120LE, are designed for up to 12 feet of free fall for a 310 pound worker, or workers up to 400 pounds with free fall limited to 6 feet.
When should Werner shock-absorbing lanyards be retired?
When the shock pack shows any sign of deployment, the webbing or hooks are damaged, or the lanyard has arrested a fall.
Can I attach Werner lanyards to a self-retracting lifeline?
No. Werner warns never to attach a lanyard to an SRL and points users who need more reach to a longer SRL.
What do DeCoil Stretch shock-absorbing lanyards do differently?
Their elastic webbing pulls in from 6 feet to 4 feet when slack, which cuts tripping and snagging on a deck.
Need help choosing the right Werner equipment?
Talk to the team or send us your list and we will put a quote together.











