Holman Truck Racks & Equipment

Holman Pro III Truck Rack, Full-Size and Mid-Size Models, Cap Versions, Taller Legs, Crossbars and Guards

Three medium-duty Pro III models for mid-size trucks with or without a cap and full-size trucks without one, plus taller legs, an extra crossbar, bed rails and window guard parts.

A heavy-duty frame eats into the payload of a mid-size or lightly worked pickup, so for contractors who carry ladders and long material regularly we often suggest the Holman Pro III truck rack. At Nation Wide Ladder we list the three Pro III models, the 80000 for full-size open beds and the 80020 and 80030 for mid-size trucks without and with a cap, and our team fits each one to your truck. The Holman range is finished with 31650 taller legs, an extra crossbar, full-length bed rails, the 31080 window guard and 31080C adapter clamps.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

When a Medium-Duty Holman Pro III Is the Right Call

Not every pickup needs the heaviest frame available. A remodeler hauling a couple of extension ladders and some trim stock, a painter with planks and ladders, or a landscaper with long-handled tools and irrigation pipe can get the job done with a lighter frame, and a lighter one leaves more payload for the load itself.

Mid-size pickups make the case stronger. Their payload ratings are lower than a full-size truck, and a heavy-duty frame can take a noticeable share of that allowance before anything is loaded, which is why Holman offers the Pro III in mid-size versions for trucks with and without a cap.

Full-size owners have a reason to look at the Pro III too. A half-ton that carries ladders a few days a week does not always justify the cost and weight of a heavy-duty model, and the full-size Pro III covers that middle ground for open beds. Crews that load heavy material daily, or need a rack over a cap on a full-size truck, should compare the heavy-duty Holman Pro II. Fleets that want one style across mid-size and full-size pickups often settle on a Holman Pro III truck rack.

Our team helps you weigh your loads and payload against each Holman duty level so you buy the one your truck needs.

Holman PRO III TRUCK RACK – FULL SIZE TRUCKS WITHOUT CAP

The Three Holman Pro III Truck Models We List

The Holman Pro III rack for full-size trucks without a cap is model 80000. It sits over the bed of a full-size pickup and leaves the bed open for tool boxes and material.

Mid-size trucks get two Holman models. The 80020 fits mid-size pickups without a cap, and the Holman Pro III rack for mid-size trucks with a cap is the 80030, built to stand over the shell. If the 80030 sits too close to your cap, the 31650 taller legs raise it by 6 inches.

Choosing between the two mid-size Holman versions is mostly a question of what the bed will carry in the long run. A truck that will keep its cap needs the 80030 from the start, while an open-bed truck can use the lower 80020, which sits closer to the cab roof and keeps the profile down. If you are undecided, plan around the cap, since adding a shell later means a different Holman rack or taller legs. Holman Pro III listings point to its application guides to confirm fit for each make and model.

Send us your truck and the Holman Pro III model you have in mind, and we will check the application guide and quote it.

Holman PRO III TRUCK RACK – MID SIZE TRUCKS WITHOUT CAP

Holman Pro III Accessories, Guards and Build

Accessories let a Holman Pro III adapt to the way you load. The extra crossbar for the Pro III can be positioned wherever you need support, which helps with short, heavy items that would otherwise sit between the standard bars. Holman full-length bed rails, offered for 72, 78 and 96 inch beds, spread the load along the bed sides, protect them from damage and give tool boxes a mounting point, though they are not offered for trucks with a camper shell.

Cab protection is the other add-on to plan. The Holman 31080 window guard is listed for the full-size 80000, and the 31080C adapter clamps attach that guard to both Holman pickup rack lines. A guard keeps a shifting ladder or length of pipe from hitting the rear glass in a hard stop.

Holman positions the Pro III as its medium-duty model, one step lighter than the heavy-duty Pro II, and builds its truck racks from round tube with gussets at the leg joints. Ask us for the current Holman tube size and rated capacity for your model before planning a heavy load, since those figures decide how much the rack can carry.

We install the Holman rack, bed rails and guard together, so the clamps and brackets are set and torqued in one visit.

Holman PRO III TRUCK RACK – MID SIZE TRUCKS WITH CAP

Fitting and Caring for a Holman Pro III Truck Rack

Start by placing your truck in the right Holman class. Full-size pickups without a cap take the 80000, mid-size trucks take the 80020 or 80030 depending on the cap, and full-size trucks that will run a cap need a heavy-duty Holman cap rack instead. Then measure the bed for the matching bed rails, since the 72, 78 and 96 inch versions are not interchangeable.

Height deserves a second look on capped trucks. Measure from the bed rail to the highest point of the cap, including any vents or a raised center section, and compare it with the clearance of the Pro III before you decide whether the 31650 taller legs are needed. A gap between cap and rack keeps the shell from flexing under load.

Check the Holman mounting clamps and bolts after the first few weeks and at each oil change, look over the welds at the legs for cracks, and replace worn straps. Spread loads across both crossbars, or three with the extra bar, and avoid concentrating weight in the middle of a span.

Drive in to our Windham NH or Worcester MA showroom and we will measure your cap and bed for a free estimate.

Holman PRO III 6″ TALLER LEGS – MID SIZE TRUCKS WITH CAP

Holman Pro III Truck Racks Within the Wider Lineup

A Pro III on a mid-size pickup often works beside other vehicles in the same business, from full-size trucks on heavier Holman racks to vans with shelving and roof racks. Keeping the rack style consistent means crews load every vehicle the same way.

You can line Holman up against the other manufacturers we carry in our ladder and truck equipment brands hub before you decide.

Holman FULL LENGTH BED RAILS – 72″

Order a Holman Pro III Truck Rack

Put a Holman Pro III truck rack on a mid-size or lightly loaded full-size pickup and you get a capable rack without excess weight, and our regular weekly runs from New Hampshire bring it to Maine customers along with the rest of New England. Browse our Holman Pro III racks and accessories, compare other Holman truck racks and the full Holman truck and van equipment catalog, then request a quote.

Holman Pro III Truck Rack FAQs

Which Holman Pro III fits a mid-size pickup with a cap?

The 80030 is listed for mid-size trucks with a cap. The 80020 is the Holman Pro III version for mid-size trucks without a cap.

Is there a Holman Pro III for full-size trucks?

Yes, the 80000 fits full-size trucks without a cap. Full-size trucks running a cap take a heavy-duty Holman cap rack instead.

Can I raise a Holman Pro III truck rack over a tall cap?

Holman offers the 31650 taller legs, which add 6 inches of height to the Pro III for mid-size trucks with a cap.

Does a window guard fit the Holman Pro III?

The 31080 window guard is listed for the 80000 full-size Pro III, and the 31080C adapter clamps mount the 31080 guard to Pro II and Pro III racks.

Do Holman bed rails work under a Pro III?

Holman full-length bed rails come for 72, 78 and 96 inch beds and spread the load along the bed sides, but they are not offered for trucks with a camper shell.

Need help choosing the right Holman equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder