Holman Truck Racks & Equipment
Holman Pro II Racks for Heavy-Duty Pickups, F-250, F-350 and Ram Mega Cab Racks, Cap Racks, Leg Sets and More
Steel-tube ladder and material racks sized for Ford F-250 and F-350 trucks and the Ram Mega Cab, in standard, extended and crew cab versions for 78 and 96 inch beds.
Three-quarter and one-ton pickups carry the heaviest daily loads in many fleets, so we fit Holman Pro II racks for heavy-duty pickups sized for the Ford F-250, F-350 and the Ram Mega Cab. At Nation Wide Ladder we list complete Holman truck racks for standard, extended and crew cab trucks, cap versions for extended and crew cab pickups, and Holman legs and bars sets with and without a cap, including 6 inch taller legs, then install them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Heavy-Duty Pickup Owners Run Holman Pro II Racks
An F-250 or F-350 often works as the main material truck for a crew, carrying ladders, steel, lumber and pipe on top of a bed already loaded with tools and boxes. A rack on a truck like that sees more weight and more trips than one on a lighter pickup, which is why these trucks tend to run the Pro II rather than the medium-duty Pro III.
Each Pro II frame uses 2 inch high-tensile mechanical tube with a .083 inch wall, sized by Holman for heavy materials and cargo. More broadly, Holman points to larger, heavier-walled round tubes and generous gusseting where legs meet crossbars across its truck racks, which suits a Holman frame that may carry a full load most days.
General contractors, steel and mechanical crews, utility contractors and fleet operators with a mix of F-250, F-350 and Ram Mega Cab trucks are the natural buyers. For a fleet, a single Pro II design across those trucks keeps loading habits and spare parts consistent. Upfitters building several trucks at once can order the same Pro II for each cab and bed size, which keeps installation straightforward.
We have served contractors for over 50 years, and we size the Holman rack to the heavy-duty truck and the loads your crew carries.
Holman Pro II Models for F-250, F-350 and Ram Mega Cab Trucks
For heavy-duty trucks without a cap, there are three complete Holman truck racks to choose from. The 04004 covers standard cab F-250 and F-350 trucks with a 96 inch bed, while extended and crew cab trucks, the Ram Mega Cab among them, pick the 06004 for a 96 inch bed or the Holman Pro II short bed rack for 78 inch beds (06104).
For trucks with a cap, the Holman cap versions are listed for extended and crew cab trucks, in long bed (06013) and short bed (06113) form for the F-250, F-350 and Ram Mega Cab. Standard cab owners with a cap should ask us about options, since the cap versions we list start at the extended cab. If a cap is likely later, mention it when you order, so the legs suit the plan.
Check bed length carefully, since crew cab trucks in this class come with both 78 and 96 inch beds and each takes its own Holman frame, so Ram Mega Cab owners in particular should confirm bed length. Lighter trucks have separate versions within our wider range of Holman truck racks.
Give us the cab, bed length and cap plans for each truck, and our quote will list the matching Pro II, at 603-434-6911 in NH or 508-754-3030 in MA.
Holman Pro II Racks Within a Heavy-Duty Fleet
Heavy-duty pickups often work beside service body trucks and vans in the same fleet. Holman also offers the 1200 Series Pro Rack for full-size trucks and work bodies, so a fleet can compare the Pro II with its newer sibling before standardizing.
To weigh Holman against other manufacturers, see the makers listed in our ladder and truck equipment brands hub.
Cap-Ready Holman Pro II Leg Sets and Taller Legs
Pro II legs and bars are also sold as sets for the F-250 and F-350. The 01040 set is listed for trucks without a cap and the 01130 set for trucks with a cap, which lets you change a truck’s setup when a cap goes on or comes off without replacing the whole frame.
For a taller cap, Holman offers 6 inch taller legs (31540) for the 01130 set, raising the Holman frame by 6 inches. Take the cap’s height from the bed rail to its tallest fixture, a roof vent or light for example, before picking standard or taller legs.
Heavy loads make inspection more important. Go over the leg, foot and crossbar hardware once the first loads have settled it and again each season, watch for cracks near welds or bent crossbars, and wash salt off before it sits through a New England winter. A frame that shows damage should come off duty until it is checked. Spread material across the crossbars rather than stacking it at one end.
Our installers fit the Pro II, its legs and any 6 inch extension, setting the Holman frame level and square over the bed or the cap.
Order Holman Pro II Racks for Heavy-Duty Pickups
Holman Pro II racks for heavy-duty pickups give an F-250, F-350 or Ram Mega Cab a stiff, tube-built frame for daily material hauling, and customers in Maine can plan around our regular weekly deliveries from New Hampshire. Share the truck and its usual loads and we will price it. Browse Holman products in our store or read our Holman overview before you ask for a quote.
Holman Pro II Racks for Heavy-duty Pickups FAQs
Which trucks fit Holman Pro II racks for heavy-duty pickups?
The listings name the Ford F-250 and F-350, and the extended and crew cab versions add the Ram Mega Cab.
Is there a Holman cap version for an F-250 or F-350?
Yes. The 06013 (long bed) and 06113 (short bed) Pro II cap racks are listed for extended and crew cab F-250, F-350 and Ram Mega Cab trucks.
Which Holman legs fit an F-350 with a cap?
The 01130 legs and bars set is listed for F-250 and F-350 trucks with a cap, and the 31540 taller legs raise it by 6 inches.
What tubing is the Holman Pro II made from?
The tube is 2 inches in diameter with a .083 inch wall, and Holman specifies high-tensile mechanical tubing.
Do you install Holman racks on heavy-duty trucks?
Yes. We provide installation for Holman products, including complete Pro II racks, cap versions and leg kits.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.










