Holman Truck Racks & Equipment
Holman Service Body Ladder Racks, Drop Down Racks, Pro II Body Racks, Mount Kits, Side Channels and Leg Extensions
Drop down ladder racks for low, mid and high covered utility bodies and heavy-duty Pro II frames over open utility bodies, with mount kits, side channels, legs and bars and window guards.
On a utility truck whose compartments are already full of tools, ladders and long material still need a proper place, and we provide it with Holman service body ladder racks. At Nation Wide Ladder we list Holman ladder equipment for both open and covered service bodies and install them on your truck. The range covers single drop down ladder racks for low, mid and high roof covered bodies, the 4A959 and 4089K covered body mount kits, the 40960 open body mount kit, and heavy-duty Pro II service frames built complete or from side channels, legs and bars, leg extensions and window guards.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Holman Service Racks for Open and Covered Body Styles
A service body truck is a toolbox on wheels, with compartments along both sides and either an open cargo area in the middle or a fully enclosed box. Utility crews, plumbers, electricians, mechanics, municipal fleets and equipment service technicians choose them because everything is organized and locked at the curb. Ladders and long material still need somewhere to go, and the right answer depends on the style of the service body.
An open service body leaves the center exposed, so the usual approach is a rack that spans the bed on legs anchored to the compartment tops. That gives a full platform for ladders, pipe and conduit, and it keeps the open center free for bulky equipment.
A covered service body already has a roof, so the ladder rack mounts on top, much as it would on a van, and the height of that roof decides how far the ladder has to be lifted. That is where a drop down rack earns its place, because it brings the ladder down to where one person can handle it safely. Holman makes service body ladder racks for both cases, with mount kits that attach the rack to the box rather than the cab.
Bring your service truck to our Windham NH or Worcester MA showroom for a free in-person look at which Holman setup suits its body.
Holman Drop Down Ladder Racks for a Covered Service Body
For covered bodies, Holman offers single drop down ladder racks sized to the roof. We list the 47953 for low roof covered bodies, the 47973 for mid roof bodies and the Holman 47993 drop down rack for high roof covered service bodies. Each lowers the ladder with a pull of a handle, which matters more as the service box gets taller.
Mounting is handled by a dedicated Holman kit. The 4A959 kit attaches Holman drop down and Clamp & Lock ladder racks to a covered service body, and a separate kit, the 4089K, mounts Holman cargo racks for crews that want a full roof platform instead of a ladder rack.
Roof height is the single most important number when choosing a covered service rack. Measure from the ground to the top of the box, and compare it with the low, mid and high versions before you order. A rack built for the wrong height may not lower the ladder far enough, which defeats the purpose of a drop down design.
Send our team the make, model and roof height of your service body and we will confirm which Holman drop down rack matches it.
Holman Pro II Ladder Frames Over an Open Service Body
On open bodies, Holman service body ladder racks are built on the heavy-duty Pro II. The complete Holman Pro II service body rack for extended cabs with an 8 foot box is part 78120, and the standard cab version for 8 foot bodies is part 78020. Both are black and built from the same 2 inch high-tensile tube as the Pro II pickup rack.
The Holman rack can also be assembled from parts. Holman side channels run along the compartment tops and are sized by cab and length, with 8 foot versions for standard and extended cabs, a 9 foot version for standard cabs, and a 9 foot extended cab channel that also fits 11 foot bodies on standard cabs. They come in black and, in some sizes, white.
Holman heavy-duty legs and bars, 70020 in black and 70023 in white, come with a bulkhead support at the front and a revised rear mount. The 31520 heavy-duty leg extensions swap the 3 inch extensions for 9 inch ones, useful when the rack must clear tall compartments or a crane, and the Holman 40960 open body mount kit suits a drop down or Clamp & Lock rack instead.
We install the Pro II side channels, legs and bars on your service truck ourselves, so the rack sits square on the compartment tops.
Measuring a Service Body and Caring for Holman Ladder Racks
Fit starts with three measurements. Note whether the truck is a standard or extended cab, measure the length of the service body, and on covered bodies measure the roof height. Holman builds its parts around those numbers, and a side channel or drop down rack for the wrong size will not mount correctly. Color comes last, with black and white versions of many Pro II parts so the rack can match the paint.
Think about what else sits on the truck. Crane masts, compartment-top boxes and light bars all affect where the legs can land and how tall the rack must be, which is when the 9 inch leg extensions earn their keep. Holman window guards in black (70070) and white (70073) protect the rear glass on Pro II service setups.
Build checks into routine maintenance. Tighten Holman mount kit and leg bolts after the first few weeks and at each oil change, look for cracked welds at the legs, and keep drop down pivots lubricated and free of road grime.
Send us your measurements and a list of the Holman parts you want, or call NH 603-434-6911 or MA 508-754-3030, and we will quote the build.
Holman Service Body Gear in a Working Fleet
A service body truck rarely works alone. The same business may run pickups on Holman Pro II racks and vans with shelving, and matching the ladder mechanism across all of them lets any crew load any truck.
Before you settle on Holman, you can compare it with the other makers we carry in our ladder and truck equipment brands hub.
Order Holman Service Body Ladder Racks
Fit Holman service body ladder racks and a utility body becomes a complete ladder and material carrier, and our regular weekly deliveries from New Hampshire reach Maine fleets as well as the rest of New England. Browse our Holman service body racks and mount kits, see the other Holman truck racks and our overview of Holman truck and van equipment, then request a quote with your body details.
Holman Service Body Ladder Racks FAQs
Which Holman drop down rack fits my covered service body?
Holman sizes them by roof height, with the 47953 for low roof, the 47973 for mid roof and the 47993 for high roof covered bodies. Each needs a mount kit such as the 4A959.
What Holman rack goes on an open service body?
Open bodies usually take a Holman Pro II rack built for service bodies, such as the 78020 (standard cab, 8 foot length) or 78120 (extended cab, 8 foot length), or one built from side channels and legs and bars.
How can I raise a Holman Pro II rack?
Fit the 31520 heavy-duty leg extensions, which take the place of the 3 inch extension legs in the kit and give 9 inches of lift.
Do Holman Pro II service parts come in white?
Several do. Legs and bars come in black (70020) and white (70023), some side channels are offered in white, and window guards come in black (70070) and white (70073).
Can a Holman drop down or Clamp & Lock rack go on an open service body?
Yes. Holman offers the 40960 open body mount kit for drop down and Clamp & Lock ladder racks on open bodies.
Need help choosing the right Holman equipment?
Talk to the team or send us your list and we will put a quote together.







