Holman Truck Racks & Equipment

Holman Truck Cap Ladder Racks, Clamp & Lock, Drop Down and Combo Kits, Mount Kits and Fiberglass Cap Plates

HD aluminum ladder racks that mount to the roof of commercial and ARE fiberglass caps, in single, double and combo kits sized for 6.5 and 8 foot caps.

A capped pickup loses the open bed where a ladder would ride, so we mount Holman truck cap ladder racks straight to the roof of the shell, keeping the bed enclosed while the ladder rides up top. At Nation Wide Ladder we list Holman HD aluminum kits for 6.5 and 8 foot caps and install them on your truck. The range covers Clamp & Lock racks and kits, drop down kits, combo kits that pair both mechanisms, a driver side Clamp & Lock add-on, the 408SC mount kit for commercial caps and the 408GC slider plates for ARE fiberglass caps.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Why a Capped Truck Needs a Holman Cap Ladder Rack

A commercial cap turns a pickup bed into a lockable, weatherproof cargo box, which is why so many service contractors run one. The catch is the ladder. The shell takes away the open bed where a ladder might otherwise ride, and a conventional rack over the bed has to stand tall enough to clear the shell, which adds height and weight to the truck.

Mounting the rack to the truck cap itself solves both problems. The rack sits low on the shell, the bed stays enclosed, and the ladder rides in roughly the position it would on a work van. Electricians, HVAC and plumbing technicians, alarm installers and property maintenance crews who prefer a truck to a van get much of the convenience of a van with the towing and off-road ability of a pickup.

The mechanism depends on how the crew works. A Clamp & Lock rack holds the ladder down with a locking arm, which suits a ladder that comes off a few times a day. A drop down rack brings the ladder down beside the truck with a handle, so nobody climbs onto the bumper. Holman truck cap ladder racks come in both styles, and a combo kit puts one of each on the same shell.

Our team helps you match the Holman mechanism to the ladders you carry and the way you load your truck.

Holman COMBO HD ALUMINUM LADDER RACK KIT – DROP DOWN / CLAMP & LOCK – 6.5′ MOST COMMERCIAL CAPS

Holman Truck Cap Ladder Kits and Rack-Only Models

Holman Clamp & Lock racks for caps are HD aluminum. The rack-only models are the 4A83L for 6.5 foot caps and the 4A84L for 8 foot caps, and the 4A85L driver side mechanism adds a second locking arm to the 4A84L. Complete Holman Clamp & Lock kits, which bundle rack, mechanism and mount kit, come in single and double versions for both cap lengths.

Holman drop down kits also come in single and double versions for 6.5 and 8 foot caps, as parts 4C6A0D and 4C8A0D for single kits and 4C6ADD and 4C8ADD for doubles. Each includes the rack, the drop down mechanism and the mount kit, so a capped truck can be fitted in one order, and a double suits crews carrying two extension ladders of similar length.

The Holman combo HD aluminum kit for 8 foot caps, part 4C8ACD, and its 6.5 foot sibling 4C6ACD pair a drop down mechanism for a longer ladder with a Clamp & Lock mechanism for a lighter one. Both come complete with the rack, both mechanisms and a mount kit.

Send us the Holman kit numbers you are weighing with your cap length, and we will quote the full order in one reply.

Holman CLAMP & LOCK HD ALUMINUM LADDER RACK – DRIVER SIDE MECHANISM (ADD TO 4A84L)

Mounting Holman Racks to Commercial and Fiberglass Truck Caps

How the rack attaches to the truck cap is as important as the rack itself. The Holman 408SC mount kit is made for ARE DCU and other commercial truck caps, the aluminum work shells that usually have mounting rails along the roof, and it fits both the Clamp & Lock and the drop down racks.

Fiberglass caps need a different approach. The Holman 408GC glass cap rail mount plates are a pack of eight slider plates with studs, designed to fasten Holman racks to the mounting rails on ARE fiberglass caps. Check that your fiberglass shell has factory roof rails before you plan a rack, since a bare fiberglass roof is not built to carry that load.

Every Holman cap rack we list is HD aluminum, which keeps weight off the roof of the shell and avoids rust on a truck that sees salted roads. Holman builds its racks to SAE and ASTM manufacturing processes and designs them to sit low. Ask the maker of your shell for its roof load limit, because the shell rather than the rack is often the deciding factor.

We install the rack, mount kit and plates on your truck cap ourselves, so the rails and studs line up before the first ladder goes on.

Holman COMBO HD ALUMINUM LADDER RACK KIT – DROP DOWN / CLAMP & LOCK – 8′ MOST COMMERCIAL CAPS

Sizing Holman Truck Cap Ladder Racks and Daily Checks

Holman sizes these kits to the length of the shell, 6.5 or 8 feet, and describes them as fitting most commercial caps. Measure the shell roof and its rails rather than the truck bed, because cap lengths do not always match bed lengths exactly. Count your ladders next. A single kit carries one ladder, a double carries two in the same style, and a combo carries one of each.

If you buy a rack-only Holman Clamp & Lock model, add the matching mount kit to the order, and owners of fiberglass caps should add the 408GC plates. If the truck already wears a shell with an older rack, note the existing rail positions, since the new rack has to line up with them or the rails have to move.

Inspect the mount kit fasteners and rail plates regularly, since cap roofs flex more than van roofs, look over the mechanisms for bent arms or worn pads, and keep pivots clear of grit and ice. If the shell shows cracks around the rails, stop loading it until it has been inspected.

Pull your truck into our Windham NH or Worcester MA showroom and we will measure the cap and rails for a free estimate.

Holman CLAMP & LOCK HD ALUMINUM LADDER RACK KIT – DOUBLE – 6.5′ MOST COMMERCIAL CAPS

Holman Truck Cap Ladder Gear and the Rest of the Rig

A capped pickup that carries ladders up top often shares a fleet with vans and open-bed trucks. Choosing the same mechanism across the fleet lets any crew load any vehicle without learning a new rack.

When Holman is one of several makers on your shortlist, our ladder and truck equipment brands hub sets them side by side.

Holman CLAMP & LOCK HD ALUMINUM LADDER RACK – 6.5′ MOST COMMERCIAL CAPS

Get Holman Truck Cap Ladder Racks

With Holman truck cap ladder racks on the shell, your capped pickup carries ladders like a work van while the bed stays secure, and our own trucks deliver across New England with shipping anywhere in the US. Browse our Holman ladder racks for capped trucks, compare other Holman truck racks and the full Holman truck and van equipment catalog, then send us your cap make and length for a quote.

Holman Truck Cap Ladder Racks FAQs

Which truck cap sizes do Holman cap ladder racks fit?

Holman sizes them for 6.5 and 8 foot caps and describes the kits as fitting most commercial caps. Confirm your cap length and rails before ordering.

Can I mount a Holman rack on a fiberglass truck cap?

Holman offers the 408GC pack of eight slider plates with studs for the mounting rails on ARE fiberglass caps. The cap needs roof rails to carry a rack.

What is the Holman combo truck cap kit?

The combo kits (4C6ACD and 4C8ACD) pair a drop down mechanism for a longer ladder with a Clamp & Lock mechanism for a lighter one, and include the rack and mount kit.

Do the rack-only Holman Clamp & Lock cap models need a mount kit?

Yes. The 4A83L and 4A84L need a mount kit such as the 408SC, which Holman makes for ARE DCU and other commercial truck caps.

Can I add a second Holman mechanism later?

For the 8 foot 4A84L Clamp & Lock rack, Holman offers the 4A85L driver side mechanism, which adds a second locking arm.

Need help choosing the right Holman equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder