Resources
Holman or Weather Guard Shelving for Work Vans, Trade Packages, Starter Kits, Bulkheads, Folding Shelves and More
How the two van interior makers differ in package design, trade layouts, partitions, folding shelves, warranty and fit, and which kind of crew each approach suits.
Deciding between Holman or Weather Guard shelving is less about which maker is stronger and more about how you want to buy a van interior, as a finished trade layout or as a core kit you build on. Nation Wide Ladder supplies and installs both, and we set Holman trade packages and Quick Package tiers beside Weather Guard van packages, Pro Packages, bulkheads, folding shelves and add-on drawers for your make, roof and wheelbase.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
How Holman and Weather Guard Each Package a Van Interior
The two makers start from different ends. Holman sells complete layouts, and we list more than 200 Holman van shelving packages, each tied to a make, wheelbase and roof height. Its range runs from the bare Base package through the Quick Package Go, Pro and Max tiers to trade layouts for HVAC, Electrical Contractor, General Service, Telecom, Security, Locksmith, Plumbing and General Contractor work, plus EZ versions with long drawers.
Weather Guard begins with a core kit. Each of its van packages pairs adjustable shelving cut to fit the interior with a bulkhead, and the maker designed those kits around basic jobsite needs and delivery work. Its own guidance treats one bulkhead with three shelving units as a balanced starting point for most crews, with lockable drawer units such as the ITEMIZER and PACK RAT, bins and tank racks added once the van is working. A separate line, the Pro Packages, is configured by trade.
Neither approach is better in general. A crew that knows its trade and wants the van finished on day one often leans toward a Holman layout, while a fleet that wants a working baseline and room to adjust may prefer the Weather Guard route.
Our team helps you decide whether a Holman layout or a core kit suits your crew before you compare part numbers.
Holman Trade Layouts Against Weather Guard Pro Packages
Where Holman publishes package contents, they run deep. The 46 inch Holman HVAC sets list two lockable compartments, seven steel drawers, a small-parts bin module, a three tier refrigerant tank rack and an 18 gauge steel bulkhead. The Holman Quick Package tiers step from a bulkhead with three shelving units in Go to drawer units, parts bins, two locking shelf drawers and a locking partition door in Max.
Weather Guard keeps its standard kits simpler and puts trade detail into its accessories and Pro Packages. Its shelving is designed to be universal across van lengths, widths and heights, while the Pro Packages are pre-configured by trade and sized to each roof height and wheelbase. Its online Van Configurator lets you lay out an upfit by trade, model and workflow before ordering.
In practice, both makers reach a trade interior. Holman gets there in a single part number, and Weather Guard gets there through a core kit plus chosen pieces.
We install either maker’s shelving, drawers and bulkhead as one job, so the finished interior goes in square and ready for stock.
Holman or Weather Guard Shelving Within the Whole Upfit
Shelving is one part of a working van. Both makers sell roof racks to go with their interiors, so many fleets plan the shelving, the Weather Guard bulkhead or Holman partition and the ladder rack together, sometimes mixing makers between inside and outside. The broader Holman van shelving range and the Weather Guard van package line each show how far the choice reaches.
If a third maker belongs on your list, look through our ladder, rack and van equipment brands hub before you settle the fleet standard.
Weather Guard and Holman Partitions, Folding Shelves and Warranty
The bulkhead is where the two makers differ most visibly. Weather Guard sells steel window and screen bulkheads whose center section can become a locking swing door, with pre-punched holes for accessories, and it describes them as compliant with FMVSS safety standards for cargo vans. Its composite bulkheads are lighter and fit the opening more tightly, which the maker says improves noise and climate control, a real comfort in cold New England weather. Holman supplies 18 gauge steel partitions with its HVAC and General Contractor packages, offers pass-through panels and locking partition doors, and says its partitions are meant to keep your team and gear safe.
Both makers offer aluminum folding shelves for delivery work. Holman folding shelf packages use aluminum shelves on powder-coated steel uprights, rated by Holman at 150 lbs per shelf, with a sliding partition on several high roof builds. Weather Guard folding shelves use the same rail mounting as its standard units, so the two can be mixed in one van.
On warranty, Weather Guard states a limited lifetime warranty against manufacturer defects on its van equipment, and Holman says it fleet-tests each product before it ships.
You can compare a steel and a composite partition in person at our Windham, NH and Worcester, MA showrooms with a free consultation.
Choosing Holman or Weather Guard for Your Vans and Fleet
Start with the van. Both makers tie each package to a make, roof height and wheelbase, so a Weather Guard kit number such as 600-8410L for the 148 inch high roof Ford Transit and a Holman title naming the same van both need checking against the door sticker. Then decide how much of the interior you want settled now. A Holman trade layout suits a crew that already knows its parts mix, while a core kit with a bulkhead suits a new van whose job is still taking shape.
Fleets add a third question, which is consistency. Running one maker across every van keeps drawers and bins in the same place for each technician, and replacement parts easier to order, whether through Holman listings or a Weather Guard distributor. Mixed fleets can still work well when each van model carries the same layout.
Weather is the last practical check in New England, since salt and slush ride in on boots and hoses, so keep drawer slides and shelf hardware clean whichever maker you pick.
Send us your list of vans with the Holman and Weather Guard options you are weighing, and we will price them side by side in one quote.
Holman or Weather Guard Shelving, Installed by Our Team
Whichever approach fits your crew, Nation Wide Ladder has served contractors for over 50 years and installs Holman or Weather Guard shelving with the bulkhead and add-ons your vans need, delivered on our own trucks across New England.
Holman or Weather Guard Shelving FAQs
Is Holman or Weather Guard shelving better for a trade van?
Neither is better in general. Holman sells complete trade layouts under one part number, while Weather Guard starts with shelving and a bulkhead and builds toward a trade through Pro Packages and accessories.
What comes in a Weather Guard van package?
Adjustable shelving cut to fit the specific van plus a bulkhead that protects the driver from shifting loads.
Do Holman packages include a bulkhead?
Many do. Quick Package Go includes a bulkhead partition, and the 46 inch Holman HVAC sets list an 18 gauge steel bulkhead.
Can Holman and Weather Guard parts be mixed in one van?
Fleets often mix makers between the interior and the roof rack. Inside one interior, staying with a single maker keeps mounting and replacement parts simpler.
Which warranty covers Weather Guard van shelving?
The maker states a limited lifetime warranty against manufacturer defects on its van equipment, with full terms in the manual.
Do you install shelving from both makers?
Yes. We install truck and van equipment, including shelving, bulkheads and drawers from both makers.
Need help choosing the right ladder or truck equipment?
Talk to the team or send us your list and we will put a quote together.








