Holman Van Shelving Packages

Holman Electrical Contractor Van Packages, 43 to 60 Inch Shelving With Parts Bins, Lockable Drawers, Partitions and More

Parts storage for electricians in compact, low, mid and high roof cargo vans, from dividable bins for connectors to lockable space for meters, testers and wire.

Electricians lose time digging for breakers, connectors and testers in a cargo area with no plan, so we fit Holman electrical contractor van packages that give each part a fixed place. At Nation Wide Ladder we match the 43 inch compact sets, the 46 inch low roof sets and the 60 inch mid and high roof sets to your vehicle and wheelbase, then install them. Each Holman contractor layout mixes small-parts bins, drawer units and enclosed storage, with a pass-through partition panel on some full-size vans and a wire reel holder option on the NV200.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

Who Holman Electrical Contractor Interiors Suit

Electrical work runs on small parts that are easy to lose. A single service call can need a few breakers, a handful of wire connectors, some device boxes and a meter, and none of it helps if it sits under a coil of wire at the back of the vehicle. Holman built its contractor layout around that problem, pairing bins and drawers for small parts with closed storage for the tools that cost the most to replace.

Holman says its trade packages were drawn up by its own designers and product engineers using input from experienced tradesmen. For an electrical contractor, that shows in a Holman layout where small-parts capacity and lockable space take priority over open shelving for bulky stock.

Service electricians, commercial electrical firms and maintenance electricians at plants or campuses all fit that profile. So does any shop that wants each vehicle in its fleet set up the same way, so a tech can find a part in any van on the first try.

Our team checks your van model, wheelbase and roof height against the Holman listings, so the contractor layout you order is the version drawn for your vehicle.

Holman ELECTRICAL CONTRACTOR 43″ H SHELVES – PROMASTER CITY

Holman Electrical Contractor Sizes by Roof Height

We list Holman electrical contractor van packages in three shelf heights, and the height follows the vehicle rather than the trade. The 43 inch sets go into compact vans, with versions for the Ram ProMaster City, the Ford Transit Connect and the Nissan NV200 on its 115 inch wheelbase.

The 46 inch sets suit a low roof full-size van. Listings cover the GM 135 inch wheelbase, the Mercedes-Benz Metris at 126 inches and the low roof Ford Transit at 130 and 148 inches.

The 60 inch sets use the extra height of taller cargo areas. They are listed for the Ram ProMaster 136 inch wheelbase in low and high roof form, the ProMaster 159 inch high roof, and the Transit at 130 and 148 inches in both mid roof and high roof versions. Taller units mean more shelf levels from floor to roof, which matters when an electrical shop stocks many part types. The wider family of Holman shelving packages for vans shares these heights.

Send us your vehicle details and we will quote the matching electrical layout, or call 603-434-6911 in NH or 508-754-3030 in MA.

Holman ELECTRICAL CONTRACTOR 60″ H SHELVES – PROMASTER 136″ WB LOW/HIGH ROOF

Inside the Holman Electrical Layout, From Bins to Pass-Through Doors

Across these packages, Holman combines plastic bins, drawer units and organizer inserts for switches, connectors and small fittings with larger enclosed areas that keep costly tools out of sight. The exact mix changes by vehicle, so it pays to read each listing rather than assume they match.

On the GM 135 inch, Metris 126 inch and Transit 130 inch low roof versions, the center panel of the partition can act as a pass-through into the cargo area once you add the Holman door latch and handle kit, part 40620. A tech can then reach the shelving from the cab without walking around to the side door.

The Holman electrical contractor set for the NV200 leans on dividable bin storage for breakers and connectors, with a lockable drawer unit and a door kit guarding testing equipment. A wire reel holder can be added that manages up to five spindles, so wire pays out from the reel instead of tangling on the floor.

We install the electrical layout, the partition and any add-on kits in one visit, so shelving, bins and the wire holder are anchored and aligned in your van.

Holman ELECTRICAL CONTRACTOR 43″ H SHELVES – TRANSIT CONNECT

Holman Electrical Van Equipment Beyond the Interior

Shelving is only half of an electrical setup. Ladders and lengths of conduit ride on the roof, so many electrical contractors pair the interior with a Holman ladder rack or cargo rack and plan the mounting points for both at the same time.

When you want to see how Holman sits beside the other makers we carry, open our ladder and truck equipment brands hub.

Holman ELECTRICAL CONTRACTOR 46″ H SHELVES – TRANSIT 130″ WB LOW ROOF

Choosing and Caring for Holman Electrical Contractor Shelving

Start with the van, then the work. Wheelbase and roof height decide whether a 43, 46 or 60 inch Holman set fits, and the work decides which extras matter. A service electrician running short calls may value the bins most, while a commercial contractor carrying meters, cordless kits and wire will lean on lockable space and, on the NV200, the reel holder.

Weight deserves a thought too. Wire, fittings and boxes of devices add up quickly, so keep the heaviest stock on the lower shelves and leave the upper bins for light parts. Ask us how much payload your van keeps once the shelving is in.

Once the vehicle is working, check shelf fasteners and partition mounts every few months, clear out dead stock so drawers close fully, and relabel bins when your parts mix changes. A Holman electrical layout stays useful only while the contents match the labels. If a drawer starts to drag, check that nothing heavy is resting on its slides.

You can walk through Holman shelving at our Windham NH or Worcester MA showroom and book a free consultation before you settle on an electrical layout.

Holman ELECTRICAL CONTRACTOR 46″ H SHELVES – TRANSIT 148″ WB LOW ROOF

Order Holman Electrical Contractor Van Packages

We have served homeowners and contractors for over 50 years, and Holman electrical contractor van packages turn an empty cargo area into an organized electrical workspace that we fit for you. Browse Holman equipment in our store or read our Holman brand overview, then request a quote.

Holman Electrical Contractor Van Packages FAQs

Which vans do Holman electrical contractor van packages fit?

We list contractor sets for the ProMaster City, Transit Connect and NV200 (43 inch), the GM 135, Metris 126 and low roof Transit 130 and 148 (46 inch), and the ProMaster 136 and 159 plus mid or high roof Transit 130 and 148 (60 inch).

What separates the 46 and 60 inch Holman electrical sets?

Height follows the roof. The 46 inch sets suit low roof vans, while the 60 inch sets use the extra height of mid and high roof Transit and ProMaster vans to add shelf levels.

Can a Holman contractor partition open into the cab?

On the GM 135, Metris 126 and Transit 130 low roof listings, the partition center panel becomes a pass-through once the Holman door latch and handle kit, part 40620, is added.

Does a Holman electrical package hold wire reels?

The NV200 set can take a wire reel holder for up to five spindles. Ask us about reel options for other vehicles before you order.

Do you install Holman electrical contractor van packages?

Yes. We provide installation for Holman products, so we can fit the shelving, partition and add-on kits for you.

Need help choosing the right Holman equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder