TracRac Truck Racks
TracRac Pro2 Truck Rack, In Compact, Full-Size, Super Duty and Tacoma Sizes, Plus the SL, Cantilevers and More
The 1,000 lb Pro 2 contractor rack across five truck fits, its corner bracing, ARC cleats and toolbox mounts, the Pro2 and SL package we list, and the cantilever that carries long stock over the cab.
We quote the TracRac Pro2 for contractors whose pickups carry ladders, pipe and stock most working days and still need room for a toolbox and materials in the bed. Nation Wide Ladder lists the full-size Pro 2 and a Pro2 and SL package, checks which of the compact, full-size, super duty and Tacoma versions fits your truck, and installs the rack with its cantilever extension or toolbox when you need them.
- Over 50 years serving contractors
- MA, NH, CT, ME, VT & RI
- Weekly Maine deliveries
Why Contractors Pick a TracRac Pro2 for Daily Ladder Runs
A rack that works every day takes a different kind of beating from one that comes out on weekends. Thule describes the Pro 2 as built for the professional, and the details back that up, with a corner brace design and aluminum crossbars that keep rack and cargo stable, plus aluminum ARC cleats that add tie-down points beyond the load stops. Electricians, plumbers, painters and carpenters load a TracRac Pro2 with ladders, conduit, pipe and trim stock, and Thule rates it at 1,000 pounds with the load evenly spread.
The other reason contractors choose this rack is the bed. This TracRac has integrated toolbox mounts, so a crossover box can sit under the crossbars while the bed stays open for materials. Compared with the TracRac TracOne, this rack adds 200 pounds of capacity, the bracing and the cleats. Compared with the sliding SR, it stays fixed in one position, which suits a truck whose loads are consistently long and overhead. If the bed itself needs clearing for tall loads, a sliding rack may suit better, and we can quote both side by side.
Having served contractors for over 50 years, we can help you judge whether a TracRac Pro2 matches the loads your truck carries every week.
TracRac Pro2 Sizes, Tacoma Versions and the SL Package We List
Thule builds the Pro 2 in five truck fits. The compact 37001XT and full-size 37002XT cover midsize and half-ton pickups, the super duty 37003XT suits heavy-duty trucks, and two Toyota Tacoma versions, the 37004XT for 2005 to 2015 and the 37005XT for 2016 to 2023, are made for that truck. Each comes in silver or in black, which carries an XTB suffix.
The full-size TracRac Pro2 we list is the 37002XT. Thule gives it 55 pounds and dimensions of 69.5 by 16 by 31.75 inches, and the compact version weighs 54 pounds at 65 by 16 by 30 inches. We also list a Pro2 and SL package. Our listing describes it as fitting all full-size pickups, pairs the 1,000 pound Pro2 with an SL rated at 1,250 pounds, notes a cantilever option and describes installation as drill-free. The SL does not appear on Thule’s current site, so ask us to confirm its specifications for your truck before ordering.
Send us your truck’s make, model, year and bed length, and we will quote the TracRac Pro2 size that fits it.
Ratings, Bracing and Tie-Down Details on the TracRac Pro2
Thule’s 1,000 pound rating comes with conditions, a properly installed rack and weight distributed evenly, and the company adds that a vehicle’s own limits may be lower. The truck’s owner’s manual sets the real ceiling, so check it before loading a TracRac Pro2 to its full rating.
The build is corrosion-resistant aluminum throughout. Aluminum load stops adjust across the full width of the truck, so a single ladder or a wide bundle of pipe can be boxed in. ARC cleats give extra anchor points for straps, T-track along the rack takes accessories, and integrated wind deflectors make the rack quieter and more aerodynamic. Mounting is universal to the truck bed, with Thule matching installation instructions to each vehicle. Thule lists the United States as country of origin, and its spec sheet shows locks included. An Aero load stop four-pack is sold separately for crews that want more stops on the bars. The compact version carries the same features at 54 pounds, so a midsize pickup gets the full contractor package in a smaller footprint.
Our Windham, NH and Worcester, MA showrooms offer free in-person consultations, where you can talk through TracRac ratings and tie-down points with us.
Cantilever Extension and Toolbox Mounting for a TracRac Pro2
Long material that would otherwise hang off the tailgate can ride forward over the cab. The TracRac cantilever extension adds 32 inches of carrying length, and Thule lists this rack among the models it fits, along with the TracRac TracOne, SR and Utility Rack. It comes in a compact version with a 65 inch crossbar and a full-size version at 69.5 inches, matched to the rack size, and it carries its own T-track. Thule lists silver and black finishes for the compact extension, so it can match the rack it rides on. Thule notes that the extension does not fit the Xsporter or the older TracRac 22000 series.
Toolbox planning matters too. Because this TracRac has integrated toolbox mounts, a crossover box can bolt to the rack rather than sit loose in the bed, and the box and rack should be chosen together so the lid clears the crossbars. Ordering the rack, extension and box at once lets one install cover all three.
Our truck and van department installs the TracRac Pro2 with its cantilever and toolbox, so the whole setup goes on your pickup in a single visit.
TracRac Pro2 Racks Alongside Ladders and Boxes on a Contractor Truck
An overhead rack is one piece of a working pickup. The ladders on top, the toolbox under the bars and any transfer tank or drawers in the bed all compete for space, and fleets often settle on a single rack standard once they have compared a few makers.
If you are lining Thule up against other manufacturers, browse our ladder and truck equipment brands hub.
Order a TracRac Pro2 Fitted to Your Pickup
For a truck that carries ladders and stock every working day, Nation Wide Ladder quotes, fits and installs the TracRac Pro2 in the size your truck needs, with delivery across New England. Compare it with the other models on our TracRac truck racks overview, read the TracRac by Thule brand page, or browse Thule racks in our store.
TracRac Pro2 FAQs
How much can a TracRac Pro2 carry?
Thule rates the Pro 2 to 1,000 pounds when properly installed with the load spread evenly, though your truck's own limits may be lower.
What sizes does the TracRac Pro2 come in?
Thule builds compact, full-size and super duty versions plus two Toyota Tacoma versions, for 2005 to 2015 and 2016 to 2023 trucks.
Does the TracRac Pro2 have toolbox mounts?
Yes. Thule lists integrated toolbox mounts on the Pro 2, so a crossover box can sit under the rack.
What is the Pro2 and SL package?
It is a package we list for full-size pickups, pairing the 1,000 pound Pro2 with an SL rated at 1,250 pounds. The SL is not on Thule's current site, so we confirm its specs before ordering.
Can a TracRac Pro2 carry material over the cab?
Yes. The TracRac cantilever extension fits this TracRac and adds 32 inches of carrying length.
How heavy is the full-size TracRac Pro2?
Thule lists the full-size 37002XT at 55 pounds and 69.5 by 16 by 31.75 inches.
Need help choosing the right TracRac by Thule equipment?
Talk to the team or send us your list and we will put a quote together.






