System One range

System One Van Roof Racks, From Five-Crossmember Contractor Rigs to Utility Rigs, Gutter Brackets, Work Winches and More

I.T.S. series rigs for vans, 400 to 800 lb ratings, rain gutter bracket mounting, stiffening ribs, conduit carriers, ladder protection and fit checks for your roof.

System One van roof racks solve the space problem every working van has, since tools ride inside but ladders, conduit and pipe still have to travel on top. The range covers the five-crossmember Contractor Rig, the two and three-truss Utility Rig, rain gutter bracket mounting, stiffening ribs, conduit carriers, side stops and built-in Work Winch tie-downs. Nation Wide Ladder checks your roof, quotes the right rig and installs it, so the rack, winches and accessories go on as a single planned setup.

NH603-434-6911MA508-754-3030

  • Over 50 years serving contractors
  • MA, NH, CT, ME, VT & RI
  • Weekly Maine deliveries

System One Van Roof Racks for Trades Working Out of a Cargo Vehicle

A van keeps tools dry and locked, but long material still rides on the roof. System One builds its van racks for contractors who need that roof space organized, with tie-downs that are part of the rack rather than loose straps. All System One van racks belong to the I.T.S. series, so each rig can take Work Winches at purchase or later in its life.

System One splits its van range by what rides on the roof. The Contractor Rig suits trades whose loads change daily, rigid and flexible, long and short, while the Utility Rig is aimed at buyers who mostly haul long rigid items such as extension ladders. Utility Rigs come with two, three or four crossmembers, and the Contractor Rig ships with five, with more available. System One gives each van crossmember a single profile with two recessed T-slots on top and two underneath, so accessories move freely between positions. Electricians and plumbers can add a cast aluminum door and end cap that turns a 4 or 6 inch PVC pipe (not included) into a conduit carrier, a 13 inch tall side stop handles stacked ladders that rise past the extension beam, and a heavy Master Lock cable lock helps protect ladders from theft.

We have outfitted contractor and homeowner vehicles for over 50 years, so we can tell you which System One layout trades like yours tend to settle on.

System One AWW – Work Winches

System One Contractor and Utility Rigs on the Van Roof

The System One I.T.S. Contractor rack runs the full length of the roof with five crossmembers and a manufacturer rating of 800 lb. Extension beams carry the front and rear crossmembers out past the mounting brackets, so longer and more flexible material is supported along its length, and the cantilevered rear crossmember keeps ladders clear of the rear gutter and roof during loading.

The System One I.T.S. Utility rack is the economical option for ladders and other rigid cargo. System One rates the two-truss version at 400 lb and the three-truss version at 600 lb, with the center truss there to support material that would otherwise sag, and either version can be upgraded to a Contractor Rig later.

Wide vans can call for stiffening ribs. These lengths of 1 1/2 inch aluminum angle bolt into the slots under a crossmember and roughly double its capacity, and System One recommends them on racks wider than 70 inches. A single rib under the rearmost crossmember is a common choice, since that bar takes the whole weight of a long item at the start of loading. For securing loads, AWW Work Winches plug into any I.T.S. rack in a couple of minutes.

If you would like to talk through the Contractor Rig and Utility Rig in person, our Windham, NH and Worcester, MA showrooms offer free consultations and estimates.

System One I.T.S. Contractor rack

How System One Van Roof Racks Mount, and the Materials That Carry the Load

System One van racks mount by clamping brackets against the underside of the rain gutter, using a 1/8 inch stainless steel clip held by 1/4 inch stainless bolts and nylon-insert nuts. Most installations use two pairs of brackets, and a third middle pair is common. Because the rack is aluminum, it will not leave rust streaks running down the van’s sides from the brackets.

Structural parts are 6000-series extruded aluminum, and all fasteners are 18-8 stainless steel. Extension beams stand 5-1/2 inches tall, which gives the strength needed for weight carried out past the brackets, and a lighter rack also leaves more of the van’s gross vehicle weight rating for cargo.

Protecting the vehicle matters as much as carrying the load. With the rear crossmember cantilevered out past the brackets, a ladder normally sits at least 6 inches away from the van’s body as it slides on. Ladder Glide inserts in high-density plastic line the Contractor Rig crossmembers, so ladders move across plastic instead of grinding on bare aluminum, and color inserts can be added to match the paint or a fleet scheme.

Because the mounting depends on a rain gutter, our team checks your roof profile against the bracket design before we quote a rack.

System One I.T.S. Utility rack

Picking a System One Rig and Confirming It Fits Your Van

If you carry rigid ladders and little else, the two-truss Utility Rig is usually enough. Add the third truss for flexible stock, or go straight to the Contractor Rig if the van carries a mix of long and short material every day. Moving from a Utility Rig to a Contractor Rig is possible, but System One notes it costs slightly more than buying the contractor version first.

System One publishes van dimension charts for full-size Chevrolet/GMC, Dodge and Ford vans in standard and extended lengths, with 138 inch extension beams on standard vans and 156 inch beams on extended ones. Newer van designs are not listed, so treat those as a fit question for us rather than an assumption. Because the racks are modular, System One can cut crossmembers and beams to length for a semi-custom fit, and its FAQ says such cuts usually carry no extra charge.

Once the rig is chosen, we assemble and install it ourselves, placing the brackets on your roof so the rack sits square and secure before it leaves our bay.

Where System One Roof Racks Sit in a Fully Equipped Work Van

The roof is only part of a working van. Shelving, bins and partitions decide how the cargo area works, while the ladders on top decide how the System One rack should be laid out, and the two plans go better when they are made together. Contractors who outfit several vehicles often compare rack, shelving and ladder makers before settling on a single standard for the fleet.

When you want to see System One next to the other makers we carry, browse our ladder and truck equipment brands hub and compare them side by side.

Using Work Winches on System One Van Roof Racks

A Work Winch is simple to run. Raise the pawl, draw off enough strap for the load, wrap it around the cargo and hook the end to a crossmember or anchor hole. Spin the handwheel to gather the loose strap, then use the handle for the final tightening.

The van brackets include a brace with holes that act as anchor points for the winch hooks. The handle can stay on the shaft, where it hangs freely until pushed forward, or ride in a tool box until needed. Because I.T.S. is standard across the System One van range, Work Winches can be added years after the rack goes on, which lets a crew start with straps and move to winches as the loads grow. Keep the strap clear of sharp edges on the cargo and check its tension again after the first few miles, since a load can settle once the vehicle is moving.

Send us a list of the winches, side stops or conduit carriers you want on your System One rig, and we will return a quote for the full set.

Set Up a Cargo Vehicle With System One Van Roof Racks

From the roof check to bracket placement and winch setup, Nation Wide Ladder brings fitment and installation to System One van roof racks, so the rig suits the loads your crew carries. Compare options in our cargo van roof racks category, return to the System One brand overview, or send your van details through our quote request form.

System One Van Roof Racks FAQs

How much can System One van roof racks carry?

System One rates the van Contractor Rig at 800 lb, the two-truss Utility Rig at 400 lb and the three-truss Utility Rig at 600 lb.

How does a System One rack attach to a van roof?

Mounting brackets clamp against the underside of the rain gutter with a stainless steel clip and stainless bolts. Two pairs of brackets are typical, with a third pair often added.

Can I upgrade a System One van Utility Rig to a Contractor Rig?

Yes. System One notes the upgrade costs slightly more than buying the Contractor Rig in the first place.

Do all System One van roof racks take Work Winches?

Yes. I.T.S. is standard on all System One van racks, so Work Winches can be installed at any time.

Will System One van roof racks fit a newer van?

System One's dimension charts list older full-size Chevrolet/GMC, Dodge and Ford vans. For newer designs, give us the make, model and year and we will check the roof before quoting.

When does a System One van rack need stiffening ribs?

System One recommends stiffening ribs on racks wider than 70 inches. Each rib bolts under a crossmember and roughly doubles its capacity.

Need help choosing the right System One equipment?

Talk to the team or send us your list and we will put a quote together.

TOP
Nation Wide Ladder

Nation Wide Ladder